X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-133-22736

Well Details

Well ID: 34-133-22736
Loading map...
Country: United States
State: Ohio
County: Portage
Municipality: Windham Township
Operator Name: B & B OILFIELD SERVICES INC
Well Pad ID:
Farm/Lease Name: LONG LARRY & PEGGY
License Status: Active Injection
License Date: 1985-10-21
Spud Date: 1985-04-02
Spud Drilling Contractor: CO TOOLS
Final Drill Date: 1985-04-03
Well Total Depth: 4540.00 ft
Configuration: Vertical
Latitude: 41.230000
Longitude: -81.090000

For data sources see[1]

Well History

Well Status Well Status Date Comment
CO 1981-10-19 2111 BUFFALO OILFIELD SER INC GeoDate 10/19/81
CO 1984-08-03 213 LOMAK OPERATING CO GeoDate 8/3/84
Salt Water Injection Well 1984-08-03 Issued Date 8/3/84 Expired Date 1/30/85 Acres 0040000 Tool Type NT Proposed Formation CLINTON Proposed Depth 04540 Proposed Drill Depth 04540
Storage Well 1984-08-03 Issued Date 8/3/84 Expired Date 1/30/85 Acres 0040000 Tool Type NT Proposed Formation CLINTON Proposed Depth 04540 Proposed Drill Depth 04540
CO 1985-03-06 213 LOMAK OPERATING CO GeoDate 3/6/85
Conversion to Injector 1985-03-06
Salt Water Injection Well 1985-03-06 Issued Date 3/6/85 Expired Date 9/2/85 Acres 0040000 Tool Type RTAF Proposed Formation NEWBURG Proposed Depth 00000 Proposed Drill Depth 00000
Storage Well 1985-03-06 Issued Date 3/6/85 Expired Date 9/2/85 Acres 0040000 Tool Type RTAF Proposed Formation NEWBURG Proposed Depth 00000 Proposed Drill Depth 00000
Plugged Back 1985-03-09 CONVERT 8-4-84 - SPECIFIC GRAVITY ADJUSTMENT TO MAXIMUM ALLOWABLE INJECTION PRESSURE TO 1150 PSI -TET
Original Spud 1985-04-02 CONVERT 8-4-84 - SPECIFIC GRAVITY ADJUSTMENT TO MAXIMUM ALLOWABLE INJECTION PRESSURE TO 1150 PSI -TET
Completed 1985-04-03 CONVERT 8-4-84 - SPECIFIC GRAVITY ADJUSTMENT TO MAXIMUM ALLOWABLE INJECTION PRESSURE TO 1150 PSI -TET
Reached Total Depth 1985-04-03 CONVERT 8-4-84 - SPECIFIC GRAVITY ADJUSTMENT TO MAXIMUM ALLOWABLE INJECTION PRESSURE TO 1150 PSI -TET
CO 1985-10-21 2111 BUFFALO OILFIELD SER INC GeoDate 10/21/85
Salt Water Injection Well 1985-10-21 Issued Date 10/21/85 Expired Date 10/21/86 Acres 0040000 Tool Type NT Proposed Formation NEWBURG Proposed Depth 04148 Proposed Drill Depth 04148
Storage Well 1985-10-21 Issued Date 10/21/85 Expired Date 10/21/86 Acres 0040000 Tool Type NT Proposed Formation NEWBURG Proposed Depth 04148 Proposed Drill Depth 04148
First Injection 1986-01-01 CONVERT 8-4-84 - SPECIFIC GRAVITY ADJUSTMENT TO MAXIMUM ALLOWABLE INJECTION PRESSURE TO 1150 PSI -TET
Completion Report Received 1986-01-16 CONVERT 8-4-84 - SPECIFIC GRAVITY ADJUSTMENT TO MAXIMUM ALLOWABLE INJECTION PRESSURE TO 1150 PSI -TET
Construction Permit Expires 1986-10-21 CONVERT 8-4-84 - SPECIFIC GRAVITY ADJUSTMENT TO MAXIMUM ALLOWABLE INJECTION PRESSURE TO 1150 PSI -TET
Annulus Pressure Monitoring Approved 1995-05-10 CONVERT 8-4-84 - SPECIFIC GRAVITY ADJUSTMENT TO MAXIMUM ALLOWABLE INJECTION PRESSURE TO 1150 PSI -TET
CO 1995-07-17 3436 B & B OILFIELD SER INC GeoDate 10/21/85
Last Compliance Report 2011-05-10 CONVERT 8-4-84 - SPECIFIC GRAVITY ADJUSTMENT TO MAXIMUM ALLOWABLE INJECTION PRESSURE TO 1150 PSI -TET
Record Last Modified 2017-10-19 CONVERT 8-4-84 - SPECIFIC GRAVITY ADJUSTMENT TO MAXIMUM ALLOWABLE INJECTION PRESSURE TO 1150 PSI -TET

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
1999-08-05 3496 3498 2
3496 3498 2
2000-05-05 3894 4104 1
3894 4104 1
4318 4417 1
3496 3498 2
2000-05-05 4318 4417 1

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
ACID 0 72000 Gal 0 70,000 GALLONS OF WATER AND 2000 GALLONS OF ACID
H2O 0 70000 Gal 0
FOAM 0 80000 Gal 0 80,000 GALLONS OF WATER AND 600 SACKS OF SAND

For data sources see[4]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1007761928 2017-3-31 0:00: SW No Violations
-1014109921 2008-8-19 0:00: SW No Violations
-1059931860 2012-9-13 0:00: SW No Violations
-1106455754 2013-12-3 0:00: SW No Violations
-1133467630 2013-9-27 0:00: SW No Violations
-119129650 2007-9-5 0:00:0 SW No Violations
-1208970837 2005-11-30 0:00 SW No Violations
-1232315130 2008-11-20 0:00 SW No Violations
-1240493841 2010-12-27 0:00 SW No Violations
-1244643757 2016-9-28 0:00: SW No Violations
-1265510936 2018-7-30 0:00: SW No Violations 0.60
-1267548414 2019-6-25 0:00: SW No Violations 0.50
-1304359619 2003-4-15 0:00: SW No Violations
-1429731911 2013-3-7 0:00:0 SW No Violations
-1455463822 2004-6-21 0:00: SW No Violations
-1503128387 2012-9-13 0:00: SW No Violations
-1512155005 2004-11-15 0:00 SW No Violations
-155348148 2012-12-18 0:00 SW No Violations
-1562168072 2016-3-15 0:00: SW No Violations
-1592405475 2012-8-20 0:00: SW No Violations
-1637227980 2010-3-18 0:00: SW No Violations
-1643630657 2009-7-24 0:00: SW No Violations
-166478873 2008-5-21 0:00: SW No Violations
-1710978018 2004-10-6 0:00: SW No Violations
-1747477994 2007-2-20 0:00: SW No Violations
-181031116 2009-11-17 0:00 SW No Violations
-1827953441 2010-8-26 0:00: SW No Violations
-1847595892 2003-11-25 0:00 SW No Violations
-1904408087 2003-5-20 0:00: SW No Violations
-1930535466 2013-1-4 0:00:0 SW No Violations
-2009705250 2005-2-22 0:00: SW No Violations
-276093403 2006-2-23 0:00: SW No Violations
-289445625 2006-12-11 0:00 SW No Violations
-291155340 2008-2-25 0:00: SW No Violations
-374435068 2009-7-23 0:00: SW No Violations
-409068405 2014-11-12 0:00 SW No Violations
-447751265 2013-8-1 0:00:0 SW No Violations
-474408432 2007-5-8 0:00:0 SW No Violations
-563645313 2014-9-30 0:00: SW No Violations
-597968386 2018-2-16 0:00: SW No Violations 1.00
-678122122 2007-8-31 0:00: SW No Violations
-72090206 2012-11-1 0:00: SW No Violations
-721191558 2006-5-2 0:00:0 SW No Violations
-738576898 2013-5-14 0:00: SW No Violations
-788323981 2018-11-14 0:00 SW No Violations 0.50
-83384368 2004-6-28 0:00: SW No Violations
-857218815 2003-5-7 0:00:0 SW No Violations
-929208054 2014-1-31 0:00: SW No Violations
-937049616 2019-12-24 0:00 SW No Violations 1.30
-955456334 2009-7-14 0:00: SW No Violations
0000PL6339 Preliminary Restoration No Violations Preliminary Restoration done information from Data Point
0006679058 2002-02-28 Salt Water Injection Well No Violations Well was not running. Unable to check previous tank battery contamination due to excess snow cover. Violation is pending.
000UIC1728 1997-04-10 Salt Water Injection Well No Violations 1509.22 & 1501:9-3-07 (H) ANNULUS VALVE LEAK
000UIC1794 1999-08-05 Salt Water Injection Well Violations Noted 1509.03, 1501:9-3-07 (H) VALVE LEAKING
001216i191 2002-01-25 Salt Water Injection Well Violations Noted Site visit this date indicated that the company has not yet removed the oil spill inside the tank battery dike. Check this date was to update status not yet due. Met with the company and reminded them of the due date. Pressures were not taken this date. Insection was to only update the cleanup progress. Last inspection date 01-04-2002.
002154i125 2002-04-24 Salt Water Injection Well No Violations Well was not running during inspection. Active clean-up of crude oil floating on water within the diked area. NO VIOLATIONS.
002154i246 2002-06-25 Salt Water Injection Well No Violations System not running. NO VIOLATIONS.
002154i398 2002-08-22 Salt Water Injection Well No Violations Rain water with oil scum in corner of tank battery dike. System was not running. NO VIOLATIONS.
0072090206 2012-11-01 Salt Water Injection Well No Violations My inspection of the injection facility and well found no violations.
0076505439 2008-06-04 Salt Water Injection Well No Violations Injection pressures are now less than the maximum pressure of 890 psi.
0083384368 2004-06-28 Salt Water Injection Well Violations Noted The grass seed has started to germinate and will probably recover. The loading pad still needs to be cleaned and the debris properly disposed.
0099379283 2006-08-30 Salt Water Injection Well No Violations Quarterly status check inspection. I spoke with Dave Ballentine about setting a two pen recorder on the injection and annular side of this well. As noted during the previous MIT, it appears that there has been a failure of the 4-1/2 casing. The two pen chart can track annular vs injection pressures and identify any packer failure. No violations at this time.
0119129650 2007-09-05 Salt Water Injection Well No Violations The valves have been replaced as requested so that pressures could be taken. B&B Oilfield still needs to replace the two-pen recorder as required as an operating condition.
0124106806 2009-03-03 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. The injection pressure (935 psi) was above the maximum allowable (890 psi) and I told the operator to reduce the injection pressure to at or below the allowable.
0155348148 2012-12-18 Salt Water Injection Well No Violations My inspection of the injection facility and well found no violations. The pump was off, while the pressures were gauged.
0166478873 2008-05-21 Salt Water Injection Well Violations Noted Quarterly status check inspection found that the injection pressure exceeded the allowable by 20 psi. Dave Ballentine was notified and told to reduce the injection pressure.
0175695471 2016-08-05 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0181031116 2009-11-17 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. The affected area near the wellhead still needs to be seeded and mulched.
0236547283 2003-04-25 Salt Water Injection Well No Violations The spill cleanup inside of the dike is progressing. The impacted gravel is being washed and the oil and water vaccumed from the dike. An extension is granted to 05/15 to complete the spill remediation.
0276093403 2006-02-23 Salt Water Injection Well No Violations Status check inspection - no violations at this time.
0289445625 2006-12-11 Salt Water Injection Well No Violations Quarterly status inspection found no violations at this time. The two pen recorder has been installed as requested. The chart indicates that as the pressure increases during injection, there is no increase in annular pressure.
0291155340 2008-02-25 Salt Water Injection Well No Violations Quarterly status check inspection of this salt water injection well found no violations at this time. The annulus has been plumbed back to the pumphouse with a pressure release valve.
0374435068 2009-07-23 Salt Water Injection Well No Violations Dave Ballentine reported suspected packer failure at this disposal well. The brine return line connected to the annular space between the 4-1/2 production casing and the 8-5/8 surface casing started to flow indicating communication from the tubing, to the production casing and the surface casing. Hagen Well Service was on site today to unseat and remove the tubing and the packer. Sutton Pump was scheduled to be on site later today to pressure test the tubing string.
0409068405 2014-11-12 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0447751265 2013-08-01 Salt Water Injection Well No Violations There were no violations at the time of inspection.
0474408432 2007-05-08 Salt Water Injection Well No Violations Quarterly status check found that the required two pen meter has malfunctioned. I called Dave Ballentine who said that he has already contacted Midway Supply about repairing or replacing the meter.
0486701573 2004-07-07 Salt Water Injection Well Violations Noted The brine scald has been corrected. The loading pad still needs additional cleaning.
0488494298 2004-02-19 Salt Water Injection Well No Violations Status check inspectio - no violations at this time. 740# injection and 0# annulus.
0563645313 2014-09-30 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations.
0566639822 2004-09-09 Salt Water Injection Well Violations Noted Barton Oilfield Service was contracted to steam clean the tank battery and the stone pad. The work was completed with satisfactory results. Water generated while cleaning was recovered by a Northeast water truck and disposed in the injection system. The violation has been corrected.
0567229873 2006-06-02 Salt Water Injection Well No Violations Met on site with Dave Ballentine to conduct a pump test on this well. This pump test was initiated by the results of the MIT completed on May 26. The ball valve located on the 8-5/8 casing head was opened and the pump was turned on. Injection pressure built to 700 psi with no fluid loss from the ball valve. It appears that there is no problem with either the packer or the tubing.
0570320205 2011-08-04 Salt Water Injection Well No Violations I performed the quarterly UIC test on the annulus and the injection. The well was not running. There were no violations at this time.
0597968386 2018-02-16 Salt Water Injection Well No Violations I was on location to inspect the UIC well and facility. I found the injection well in operation on the day of my inspection. An identification sign is posted at the well and facility. A Northeast Oil Service brine truck arrived on location with the proper UIC number displayed (#25-222). There are no violations at this time.
0637402368 2018-09-07 Salt Water Injection Well No Violations I found the injection not in operation at this time at the time of my inspection. The facility is in good repair. I observed no leaks or spills. An identification sign is posted.
0655000901 2011-11-02 Salt Water Injection Well No Violations I performed the quarterly UIC test on the annulus and the injection. The well was not running. There were no violations at this time.
0674997017 2015-03-31 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0678122122 2007-08-31 Salt Water Injection Well Violations Noted On 8/24, attempted to complete the quarterly inspection for this brine disposal well. Instead I found the required two pen recorder was still missing, the needle valve on the annulus could not be opened or closed and there was a leak on the 8-5/8 casing valve. I called Dave Ballentine and requested that these issues be corrected by 8/31 so that the quarterly inspection could be completed. On 8/31, I found that none of the requested work was compelted. I called Dave Ballentine and told him that until this work was completed and the required inspection performed, the well was shut down and could not be used for brine disposal.
0721191558 2006-05-02 Salt Water Injection Well Violations Noted Status check inspection found a leak at the wellhead which caused a brine scald extending 50 feet from the well. The ID was missing from the brine storage area. I called Dave Ballentine and told him that the scald area needs to be reclaimed, the leak repaired and the ID replaced.
0728432306 2004-08-12 Salt Water Injection Well Violations Noted Salt water disposal well - status check inspection. Free oil and brine was found inside of the containment dike. Sloppy operations and a malfunctioning pump are to blame. The gravel inside of the dike area needs to be either cleaned or removed and replaced.
0738576898 2013-05-14 Salt Water Injection Well No Violations My inspection of the well and surface facility found no violations.
0744188355 2010-05-11 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
0788323981 2018-11-14 Salt Water Injection Well No Violations I found the injection well operating on the day of my inspection. There was no facility operator on location. A Northeast Ohio Oilfield Service Inc. brine truck arrived on location with the proper UIC number displayed (#25-222). Identification signs are posted. The facility is in good repair. I observed no leaks or spills.
0836306664 2017-06-19 Salt Water Injection Well No Violations The injection well and surface facility were inspected. The pump was operating at the time. The tanks and lines had no visible leaks.

There were no violations found.

0857218815 2003-05-07 Salt Water Injection Well No Violations The spill remediation inside of the tank battery dike is continuing. Impacted vegetation still needs to be removed and impacted gravel from the southern half of the dike area needs to be either washed or removed.
0877984231 2013-01-08 Salt Water Injection Well No Violations I performed a mechanical integrity test on the well. 1020 psi. was place on the tubing/casing annulus and monitored for fifteen minutes. There was no pressure loss observed.
0929208054 2014-01-31 Salt Water Injection Well No Violations No violations were found at the time of inspection.
0955456334 2009-07-14 Salt Water Injection Well No Violations Dave Ballentine with B&B Oilfield Service reported that the casing and tubing had equalized indicating a packer failure. I ordered B&B to cease operations and schedule a service rig to unseat and pull the packer. I notified Tom Tomastik of the problems.
0956114564 2017-10-30 Salt Water Injection Well No Violations I found the UIC facility in good repair on the day of my inspection. The injection well was in operation while on location. The proper identification sign is posted at the facility and well. I observed no leaks or spills. There are no violations at this time.
1007761928 2017-03-31 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1014109921 2008-08-19 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. The well is operating below the maximum allowable injection pressure.
1059931860 2012-09-13 Salt Water Injection Well No Violations I witnessed the installation of the packer. All conditions were acceptable.
1072515087 2012-03-13 Salt Water Injection Well No Violations No violatons were found at the time of my inspection of this well site.
1106455754 2013-12-03 Salt Water Injection Well No Violations There were no violations at the time of inspection.
1133467630 2013-09-27 Salt Water Injection Well No Violations My inspection of the well and injection facility found no violations.
1192819062 2007-10-12 Salt Water Injection Well Violations Noted During a status check inspection, I found that the packer and/or tubing had lost integrity. The injection pressure, tubing to 4-1/2 annular pressure and the 4-1/2 to 8-5/8 annular pressure were all equalized at 860 psi. The fact that the tubing to 4-1/2 casing annulus and the 4-1/2 to 8-5/8 annulus were equalized also indicates that there has been a mechanical failure of the 4-1/2 casing. I called Dave Ballentine with B&B and ordered him to cease injection operations at this well and waited until a driver arrived and shut the system down. I also called Tom Tomastik and advised him of the findings.
1193168012 2007-10-17 Salt Water Injection Well No Violations On 10/16, Bubs Well Service was on site to unseat the packer and pull the tubing. On 10/17, Bubs ran a reconditioned Halliburton R-4 and a relatively new string of 2-3/8 upset tubing. The packer was set in tension at 3861. Superior Well Service mixed 5 gallons of concentrated inhibitor in 70 bbl of fresh water. The inhibitor was pumped down the tubing and up the annulus between the tubing and the 4-1/2 casing. After circulating the inhibitor to surface, Superior pressured up on the annulus and completed the MIT. The initial shut in pressure was 1020 psi. After 5 minutes the pressure remained 1020 psi. After 10 minutes, the pressure dropped to 1015 psi. The final pressure after 15 minutes was 1015 psi. After passing the MIT the pressure was released by opening the valve on the 8-5/8 casing further proving that the 4-1/2 casing has failed and is communicating with the 8-5/8 surface casing. The failure is assumed to be near the surface since cement was circulated to surface when the 4-1/2 was completed. Dave Ballentine was on site to witness the job and understands the importance of having a properly functioning two pen pressure meter recording the injection pressure and the annular pressure. The charts will be available for review at B&Bs office.
1193767440 2007-10-22 Salt Water Injection Well No Violations The two pen recorder is in place and appears to be functioning correctly. No violations at this time.
1195526430 2015-09-04 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1199664868 2003-06-17 Salt Water Injection Well No Violations Status check inspection - no violations at this time. Notified the water truck driver of a small leak on the annular bull plug which he will correct.
1208970837 2005-11-30 Salt Water Injection Well No Violations Status check inspection of this salt water injection well. No violations at this time.
1216i191 2002-1-25 0:00: SW No Violations 1.00
1216i24542 2001-11-07 Salt Water Injection Well No Violations No violations notede this date. Las inspection: 09-12-2001. Well is in operation this date.
1216i2454282 2001-11-7 0:00: SW No Violations 0.50
1231413483 2006-05-16 Salt Water Injection Well No Violations The brine scald at the injection well needs to be reclaimed. The scald was first detected during a routine inspection of the disposal system on May 2, 2006. Dave Ballentine requested permission to reclaim the area when he had equipment on site to repair the tubing leak which caused the scald. I told him that he had two weeks to reclaim the area. The May 16 inspection found that no work had been completed. I stopped at B&Bs office and left a message for Dave Ballentine that the work needs to be done immediately.
1232315130 2008-11-20 Salt Water Injection Well No Violations Quarterly status check inspection found that the well injection pressure exceeded that maximum allowable by 270 psi. I called Dave Ballentine and told him to correct the problem. He said that the high pressure is related to recent large quantities of flowback water entering the system. He will have the pump rate reduced to lower the injection pressure. I will check the well again in the next few days.
1240493841 2010-12-27 Salt Water Injection Well No Violations Quarterly status check inspection found that the system was operating. The lease road to the wellhead was drifted over so injection pressures were obtained in the pump house. No violations at this time.
124106806 2009-3-3 0:00:0 SW No Violations
1244643757 2016-09-28 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1250515992 2009-08-11 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
1265510936 2018-07-30 Salt Water Injection Well No Violations I found the injection well not in operation on the day of my inspection. Identification signs are posted. I observed no leaks or spills
1298914819 2011-02-15 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
1304359619 2003-04-15 Salt Water Injection Well Violations Noted UIC Inspection - an unknown quantity of crude oil and/or brine was released into the secondary containment dike when the sump pump failed to shut off and a 210 bbl tank was overfilled. Oil had impacted the southern half of the containment dike and was floating on the water. According to the water truck driver on site, the spill occurred on or about 4/05. It appears that very little has happened since then to remediate the spill. The operator was given seven days to clean the retention dike.
1306876540 2011-05-18 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
1360035684 2012-10-09 Salt Water Injection Well No Violations I performed a mechanical integrity test on the flow line between the well and the pump house. 1220 psi. of pressure was placed on the flow line and monitored for fifteen minutes. There was no pressure loss observed.
1395426049 2016-05-12 Salt Water Injection Well No Violations I conducted a quarterly status check inspection of this active injection well and the associated surface facilities with Inspector John Fleming. The pump was not currently running and a gauge on the injection tubing indicated an injection pressure of 880psi. The annulus between the 4.5 casing and injection tubing was equipped with a gauge reading 100psi. A Northeast Oilfield water truck delivered a load of salt water during the inspection. The truck was properly stenciled with UIC-Brine #222. I found no violations at this time.
1396571974 2014-03-28 Salt Water Injection Well No Violations The were no violations at the time of inspection.
1401733532 2014-05-30 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations.
1429731911 2013-03-07 Salt Water Injection Well No Violations My inspection of the injection well and surface facility found no violations.
1455463822 2004-06-21 Salt Water Injection Well Violations Noted The impacted soil and vegetation has been tilled and reportedly limed. If seed does not germinate properly, then the impacted soil must be removed, disposed and replaced. The contamination around the loading area has not been addressed. The site will continue to be monitored regularly.
1457855282 2012-08-13 Salt Water Injection Well No Violations My inspection of the injection facility was accompanied by another inspector, Stephen Tompkins.

A contractor was cutting up the tanks for disposal.

There were no violations at the time of inspection.

1503128387 2012-09-13 Salt Water Injection Well No Violations I performed a mechanical integrity test on the well. A pressure of 1050 pounds per square inch (psi.) was placed on the tubing-casing annulus. A loss of 5 psi. was observed during a 15 minute period.

The well passed the test.

1512155005 2004-11-15 Salt Water Injection Well No Violations Status check inspection - no violations at this time.
1524660427 2018-04-25 Salt Water Injection Well No Violations I was on location for an UIC facility inspection. I found the injection not in operation on the day of my inspection. I observed no leaks or spills. Identification signs are posted. There are no violations at this time.
1554209029 2019-4-2 0:00:0 SW No Violations 1.40
1557839919 2019-5-14 0:00: SW No Violations 1.30
1562168072 2016-03-15 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1564153479 2019-7-26 0:00: SW No Violations 1.50
1585191837 2006-05-26 Salt Water Injection Well Violations Noted The top joint of tubing developed a leak. Bubs Well Service was on site to replace the bad joint and pull and replace the packer. A new Halliburton R-4 packer was set in tension. During the following MIT, the valve on the 8-5/8 wellhead started leaking and the test failed. The leaking valve was replaced and the 15 minute MIT passed. It appears that there is a problem with the 4-1/2 casing but the tubing and packer are properly set.
1588283093 2004-06-10 Salt Water Injection Well Violations Noted During a status check inspection of this brine disposal well, a sump pump in the containment dike was found to be discharging water out of the dike and down the hillside. The result was a brine scald that affected an area 20 feet wide and 150 feet long. The scald is marked by dead vegetation. A representative of B&B was told to 1) remove and properly dispose of the dead vegetation and impacted soil; 2) lime, seed and mulch the affected area; 3) pump all water inside of the dike into the disposal system and 4) clean the loading pad area. Failure to comply will result in OEPA notification of illegal brine dumping with the recommendation for fines.
1592405475 2012-08-20 Salt Water Injection Well No Violations My inspection of the injection facility was accompanied by another inspector, Tom Hill.

A layer of gravel was installed inside the facility dike area.

There were no violations at the time of inspection.

1596029900 2020-7-29 0:00: SW No Violations 1.30
1599001365 2007-11-27 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
1600809399 2005-10-20 Salt Water Injection Well Violations Noted FAILURE TO SUBMIT ANNUAL SALTWATER INJECTION WELL REPORT FOR 2004
1637227980 2010-03-18 Salt Water Injection Well No Violations Quarterly status check inspection found that the operator has again pumped water from inside the containment area with a sump pump. The discharged water contained sufficient chlorides to kill the grass. I called Dave Ballentine and told him to stop pumping the water in the containment area anywhere but into the disposal system and to reclaim the affected area from both this incident and the packer failure last year. I also advised him that they were injecting just above the maximum allowable pressure.
1643630657 2009-07-24 Salt Water Injection Well No Violations Hagen Well Service was on site to run a rebuilt Halliburton R-4 packer into the well. The packer was set in tension at 3858. Northeast Water Service mixed 80 bbl of fresh water with 5 gallons of inhibitor. Superior Well Service pumped the water/inhibitor mixture down the annulus and circulated up the tubing. The packer was set and the annulus was pressured up to 1030 psi. After 5 minutes the pressure was 1015 psi, after 10 minutes 1005 psi and after 15 minutes 995 psi. The total pressure loss was less than 5%. The well passed the MIT.

After passing the MIT, Superior treated the well with 500 gallons of 15% HCl acid. The acid was displaced pass the packer and into the formation.

1708673295 2003-09-18 Salt Water Injection Well No Violations Status check inspection - no violations at this time.
1710978018 2004-10-06 Salt Water Injection Well No Violations Status check inspection. The facility is being painted and fresh stone has been placed inside of the containment dike.
1721862897 2012-07-27 Salt Water Injection Well No Violations The tanks were removed from the facility. A frac tank and three of the vertical tanks were on location.

There were no violations.

1747477994 2007-02-20 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. The two pen chart recorder was half full of brine indicating some annular discharge. The pressure differential does not indicate that there has been a packer failure.
1753451383 2012-09-05 Salt Water Injection Well No Violations Unloading pad
175695471 2016-8-5 0:00:0 SW No Violations
1782018499 2010-04-06 Salt Water Injection Well No Violations The brine scald remediation and pipeline reclamation has not been completed.
1782851450 2017-09-25 Salt Water Injection Well No Violations Status check inspection of this salt water disposal well. I was on location with DOGRM District Supervisor Steve Ochs to conduct quarterly status checks for the UIC Program. The well was currently injecting at a pressure of 725psi. The pressure on the annulus between the 2.75 injection tubing and 4.5 casing was 0psi and being monitored from the pump house. No violations.
1827953441 2010-08-26 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. The injection pressure was just above the allowable and I ordered the company representative to lower the pressure.
1847595892 2003-11-25 Salt Water Injection Well No Violations UIC inspection - no violations at this time - injection pressure 0# annular pressure 150#.
1870348343 2013-06-12 Salt Water Injection Well No Violations My inspection of the well and surface facility found no violations.
1875093336 2005-06-01 Salt Water Injection Well No Violations Status check inspection for this salt water disposal well. No violations at this time.
1885353325 2002-01-25 Salt Water Injection Well Violations Noted FOLLOW UP TO NOV # 1216i191 Site visit this date indicated that the company has not yet removed the oil spill inside the tank battery dike. Check this date was to update status not yet due. Met with the company and reminded them of the due date. Pressures were not taken this date.
1904408087 2003-05-20 Salt Water Injection Well Violations Noted The pollution violation inside of the tank battery has been corrected. No violations at this time.
1912034201 2005-08-23 Salt Water Injection Well No Violations Bubs Well Service was on site to repair the top joint of tubing that had developed a pinhole leak. They had released the pressure, exposed the top joint of tubing approximately 8 inches below the collar and were welding a patch onto the tubing. Barton Well Service was on site to pressure up on the annulus after the wellhead was put back together. I asked for 200 psi. I will check the well again next week.
1930535466 2013-01-04 Salt Water Injection Well No Violations My inspection of the surface facility and injection well found no violations.
2009379967 2014-07-22 Salt Water Injection Well No Violations There were no violations at the time of inspection.
2009705250 2005-02-22 Salt Water Injection Well No Violations Status check inspection of this salt water disposal well and storage system. No violations at this time.
2037799654 2009-05-12 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. The well continues to operate at maximum allowable injection pressures.
2070463103 2020-1-21 0:00: SW No Violations
2135131768 2003-04-17 Salt Water Injection Well No Violations NOV followup with Supervisor Cheslock. B&B personnel were on site washing gravel in the dike area with water and a broom. Permission was given to continue washing and to arrange for hot water to be brought in as soon as possible to complete the washing.
2137306874 2017-12-04 Salt Water Injection Well No Violations I found the injection well in operation on the day of my inspection. The facility is in good repair. An identification sign is posted. There was a Northeast Ohio Oil Field Service Inc. brine truck on location with the proper UIC brine number (#222) displayed. There are no violations at this time.
2145243062 2015-06-08 Salt Water Injection Well No Violations The well and surface facility were inspected. There were no violations found at the time of inspection.
2154i125 2002-4-24 0:00: SW No Violations 0.50
2154i246 2002-6-25 0:00: SW No Violations 0.50
2154i398 2002-8-22 0:00: SW No Violations 1.00
236547283 2003-4-25 0:00: SW No Violations
486701573 2004-7-7 0:00:0 SW No Violations
488494298 2004-2-19 0:00: SW No Violations
496024092 2020-4-24 0:00: SW No Violations 0.90
566639822 2004-9-9 0:00:0 SW No Violations
567229873 2006-6-2 0:00:0 SW No Violations
570320205 2011-8-4 0:00:0 SW No Violations
637402368 2018-9-7 0:00:0 SW No Violations 0.90
655000901 2011-11-2 0:00: SW No Violations
6679058 2002-2-28 0:00: SW No Violations 1.00
674997017 2015-3-31 0:00: SW No Violations
728432306 2004-8-12 0:00: SW No Violations
744188355 2010-5-11 0:00: SW No Violations
76505439 2008-6-4 0:00:0 SW No Violations
836306664 2017-6-19 0:00: SW No Violations
877984231 2013-1-8 0:00:0 SW No Violations
908792367 2019-9-16 0:00: SW No Violations 1.00
956114564 2017-10-30 0:00 SW No Violations 0.50
958466586 2019-2-1 0:00:0 SW No Violations 0.50
99379283 2006-8-30 0:00: SW No Violations
iGMM000012 2000-05-26 Salt Water Injection Well Violations Noted
iGMM0000122 2000-5-26 0:00: SW No Violations
PL6339 PL No Violations
UIC1728 1997-4-10 0:00: SW No Violations
UIC1794 1999-8-5 0:00:0 SW No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
000UIC1794 US-OH-131695 Mechanical failure/contamination
001216i191 US-OH-105729 2002-01-25 Pollution/Contamination
0083384368 US-OH-129497 2004-06-11 Pollution/Contamination
0083384368 US-OH-129498 2004-06-11 Contamination at surface facility (permit after 6-1-82)
0166478873 US-OH-116466 2008-05-29 Exceeding maximum allowable injection pressure
0486701573 US-OH-125307 2004-06-11 Pollution/Contamination
0486701573 US-OH-125308 2004-06-11 Contamination at surface facility (permit after 6-1-82)
0566639822 US-OH-126359 2004-08-25 Pollution/Contamination
0678122122 US-OH-127668 2007-09-04 Violation of injection tubing/fitting requirements
0678122122 US-OH-127669 2007-09-04 Mechanical failure/contamination
0721191558 US-OH-128205 2006-05-03 Mechanical failure/contamination
0728432306 US-OH-128300 2004-08-25 Pollution/Contamination
1192819062 US-OH-105095 2007-10-19 Mechanical failure/contamination
1304359619 US-OH-108586 2003-04-21 Pollution/Contamination
1455463822 US-OH-113179 2004-06-11 Pollution/Contamination
1455463822 US-OH-113180 2004-06-11 Contamination at surface facility (permit after 6-1-82)
1585191837 US-OH-115505 2006-05-03 Mechanical failure/contamination
1588283093 US-OH-115461 2004-06-11 Pollution/Contamination
1588283093 US-OH-115462 2004-06-11 Contamination at surface facility (permit after 6-1-82)
1600809399 US-OH-115695 2005-10-20 Failure to monitor pressures/volumes
1885353325 US-OH-118937 2002-01-25 Pollution/Contamination
1904408087 US-OH-119141 2003-04-21 Pollution/Contamination
iGMM000012 US-OH-131570 Violation of injection tubing/fitting requirements

For data sources see[5]

References