Well Details

Well ID: 34-155-23795

County:

Municipality:

Operator Name:

Well Pad ID:

Farm/Lease Name:

First Permit Date:

Last Permit Date:

Spud Date:

Unconventional:

Horizontal:

Producing:

Violations:

Latitude:

Longitude:

Production Data

PERIOD	GAS QUANTITY	GAS PRODUCTION DAYS	CONDENSATE QUANTITY	CONDENSATE PRODUCTION DAYS	OIL QUANTITY	OIL PRODUCTION DAYS

Waste Data

PERIOD	TYPE	QUANTITY	UNITS	DISPOSAL METHOD	WASTE FACILITY PERMIT ID	WASTE FACILITY NAME	FACILITY CITY	FACILITY STATE

Inspection Data

INSPECTION ID	DATE	DESCRIPTION	COMMENT	VIOLATION ID	VIOLATION CODE	VIOLATION_COMMENT
-1093227728	2013-04-04		The rig was drilling at 3794 feet. All conditions were acceptable.
-1196667759	2011-10-18		The installation of the packer was witnessed. All conditions were acceptable.
-1290705311	2011-05-12		No violations were found.
-1296713334	2014-02-25		The purpose of my inspection was to follow-up on an earlier Compliance Notice. A 1/4 inch valve was installed on the tubing/casing annulus. Although, the two inch valve was frozen shut, preventing a pressure reading. The required action has been taken to achieve compliance.		9-3-05(B)4
-1460054527	2006-10-23		check uic facility .
-1487620483	2013-10-09		A new treatment facility plan has been submitted and approved. The area was cleared of trees. At the time, a bulldozer was grading the site.
-1559859652	2013-04-01		My inspection of the injection well and surface facility found no violations. The pump was off at the time.
-1583392872	2009-10-16		check uic facility .
-1615172480	2007-01-31		check UIC facility .
-1692310959	2008-03-06		no violations .
-1700644504	2013-01-04		My inspection of the injection facility and well found no violations.
-1788967049	2013-10-08		There were no violations at the time of inspection.
-189102136	2013-12-03		There were no violations at the time of inspection.
-2012636125	2013-06-19		My inspection found the actual injection pressure at 1,125 psi and the annulus pressure at 1,270 psi. The tank battery was in good, working order; I noticed no visible spills or leaks.
-252836566	2014-04-21		There were no violations found at the time of inspection.
-259158583	2007-05-01		Check UIC facility .
-31713229	2008-06-06		check uic facility .
-364392595	2013-08-20		There were no violations at the time of inspection.
-400862332	2012-09-07		My inspection of the well and injection facility found no violations.
-454363005	2012-04-20		My inspection of this well site found no violations at the time.
-456151727	2007-11-14		check uic facility . Also restoration approved .
-620789016	2012-02-03		The injection pressure was measured at 1230 PSI, while the pump was operating. The well is in compliance.
-636643279	2012-07-09		My inspection of the well site found no violations at the time.
-671194936	2011-06-28		There were no violations at the time of inspection.
-974649178	2010-04-23		CHECK UIC FACILITY
1018845054	2011-02-24		check uic facility.
1084121537	2012-01-31		The well exceeded the maximum allowable injection pressure while the pump was operating. The well was shut down, immediately. With the pump off, the pressure on the tubing fell to 1130 PSI.		9-3-07(D)
1212204628	2008-12-10		check uic facility .
1264264342	2009-04-06		check uic facility .
1320694609	2011-10-19		The packer was set at 3946'. A mechanical integrity test was performed on the well and 1360 PSI was put on the tubing/casing annulus. There was no decline in pressure observed during the 15 minute test period.
1361632211	2013-02-23		On location with Rick Skidmore investigating companies dropping loads off at the well. While on location there has not been any companies dropping their loads off. The tank battery is in good condition with no leaks to report. The lease road is in stable condition. The tubing pressure while the pumps are running is 1150 psi. The max allowable pressure is 1230 psi.
1365171141	2013-02-21		My inspection was accompanied by Rick Skidmore. The injection well and surface facility had no violations at the time.
1393254757	2014-02-20		My inspection found the tubing/casing annulus was missing a 1/4 inch valve. Apparently, the bull plug on the wellhead froze and broke. The well tender was instructed to replace the fitting, as soon as possible.		9-3-05(A)3
1427662398	2007-08-06		check uic facility .
150878007	2012-10-23		My inspection of the injection facility and well found no violations. The pump was operating, while the injection pressure was gauged. I was unable to gauge the annulus.
1580912830	2014-01-15		My inspection of the injection facility found no violations.
1695782054	2010-11-18		check uic facility.
1698902652	2013-03-13		My inspection of the injection facility and well found no violations. The annular pressure was not gauged.
1785771014	2012-12-10		The well owner conducted a mechanical integrity test on the well. My inspection of the injection well found no violations.
1824815553	2012-12-07		I completed a salt water injection well inspection with ODNR Inspector Steve Ochs. My inspection found the tubing had 1,240 psi and the 4.5" had 1,170 psi. The injection facility was in good operating condition with no water or oil surrounding the diked tanks.
1960886486	2011-11-09		No violations were found at the time of inspection.
2111692856	2014-06-03		There were no violations at the time.
42597496	2013-09-03		My inspection of the well found the injection pressure below the maximum allowable pressure.
505474468	2009-07-27		check uic facility .
519105236	2012-08-02		My inspection of the well and injection facility found no violations.
521986039	2008-09-25		check uic facility .
700182891	2010-01-19		no violations .
748056453	2011-08-25		There were no violations found at the time of my inspection.
787626115	2011-10-05		There were no violations noted at the time of inspection.
787986451	2010-08-13		check uic facility.