| INSPECTION ID
|
DATE
|
DESCRIPTION
|
COMMENT
|
VIOLATION ID
|
VIOLATION CODE
|
VIOLATION_COMMENT
|
| -1227159543
|
2011-06-02
|
|
Accompanied D. Goins on restoration follow-up.
|
|
|
|
| -1941600534
|
2011-06-02
|
|
Restoration meets 1509.072(B) requirements.
|
|
|
|
| -2132501503
|
2010-04-20
|
|
No circulation at start up, pumped approx. 200bbls of water. Able to get circulation back on well bore, started cleaning out well bore. Approx.275'ft hit rock bridge plug, after drilling out bridge plug encountered small amount of gas and water. Continued cleaning out well bore at approx. 400'ft lost circulation. Pumped approx.125 bbls of water down well bore and shut in for the night.
|
|
|
|
| -643910373
|
2010-01-06
|
|
Pre-bid meeting at well site, met with Rob Stonerock, Mike McCormac, Ken Wright and Ben Lehner, no change in well since last inspection.
|
|
|
|
| -937858483
|
2010-04-07
|
|
Plugging rig will be moving in next week.
|
|
|
|
| -946318802
|
2010-04-21
|
|
At start up pumped over 300 bbls of water in well bore, no circulation. Built another pit and started mixing gel, and lost circulation materials for LCM pill. Pumped LCM pill down well bore and started cleaning out well bore, still no circulation. Mixed up another LCM pill and pumped down well bore, left set over night.
|
|
|
|
| 1074707834
|
2010-04-22
|
|
Started cleaning down well bore, after pumping approx. 20 bbls of fluid in well bore circulation was losted. Tripped out of well and reduced bit size to a 6 1/4", tripped back in continued cleaning down well bore with no circulation. Pumped approx 200 bbls of water with no circulation. Cleaned down to approx. 1135'ft., with no circulation.
|
|
|
|
| 1137272568
|
2009-08-24
|
|
Marked well location and lease road for pre-bid meeting.
|
|
|
|
| 1273750107
|
2010-04-16
|
|
Cleaning out well bore with a 8 3/4" button bit. Drilling out wood and plug materials. At the end of the day approx. 80'ft deep.
|
|
|
|
| 1273841312
|
2010-04-23
|
|
Spoke with Mike McCormac about plugging well at 1135'ft, company has fears that if they continue down well bore without circulation that materials may stick bit anad drill pipe. No shows of gas since first drilling through rock bidge plug. Pulled drill pipe and bit, ran in 1 1/2" tubing in well bore. Cemented well bore soild from 1135'ft to 170'ft. Will leave set over weekend will tap plug next week.
|
|
|
|
| 1273842282
|
2010-04-27
|
|
Tagged plug, plug set at 210'ft. Set Brush and stone bridge plug at 210'ft over coal seam. Topped off well with approx. 6 yards of 9 bag grout mix.
|
|
|
|
| 1435798528
|
2010-04-19
|
|
Started cleaning out well bore, at approx. 170'ft lost circulation, recovered after pumping approx. 100bbl of brine. At approx. 223'ft drilling hard material, at 225'ft lost circulation, unable to recover.
|
|
|
|
| 1722440352
|
2010-04-01
|
|
Started to remove trees and brush and prepare well site for plugging rig.
|
|
|
|
| 1966972584
|
2010-04-29
|
|
Witnessed cutting off conductor casing and placing ID plate on well bore.
|
|
|
|
| 870726645
|
2007-04-18
|
|
Met with Mike McCormac and Max Norris(WNF) to inspect orphan well, no casing visible in well, open well bore, approx 16" across. Fluid level approx 50'ft down. No contamination noted at this time. With an open hole like this in public area this well may cause harm to the public.
|
|
|
|
| 956882573
|
2008-02-26
|
|
Follow-up inspection, took photos and sketch for I&O case.
|
|
|
|