X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-115-61747

Well Details

Well ID: 34-115-61747
Loading map...
County:
Municipality:
Operator Name:
Well Pad ID:
Farm/Lease Name:
First Permit Date:
Last Permit Date:
Spud Date:
Unconventional:
Horizontal:
Producing: No
Violations: 5
Latitude: 39.5532010699
Longitude: -81.8858882084

Production Data

PERIOD GAS QUANTITY GAS PRODUCTION DAYS CONDENSATE QUANTITY CONDENSATE PRODUCTION DAYS OIL QUANTITY OIL PRODUCTION DAYS

Waste Data

PERIOD TYPE QUANTITY UNITS DISPOSAL METHOD WASTE FACILITY PERMIT ID WASTE FACILITY NAME FACILITY CITY FACILITY STATE

Inspection Data

INSPECTION ID DATE DESCRIPTION COMMENT VIOLATION ID VIOLATION CODE VIOLATION_COMMENT
1192078660 2013-10-02 There are no issues to report at this time.
1662724493 2013-02-21 Upon inspection, well was find idle with the 4.5" casing and the 2" tubing deteriorated from rust. Both had holes eroded through the steel. There was an odor of gas. The 2" was tied into a production line at top of wellhead however the valve was shut. At the top of the hill that production line was separated and not tied into any other line. There was no identification at wellhead and there are no tanks. The operator must make well capable of commercial production within 30 days; or plugging is required within 30 days. Failure to comply may result in Forfeiture of Bond. 3/7/2013: Mark Heins called and said he is going to head out and look at the well in question. He said it would not be until spring before they can fix anything but he would tell operator to correct/get current on any production issues. 9-1-03C
1662724493 2013-02-21 Upon inspection, well was find idle with the 4.5" casing and the 2" tubing deteriorated from rust. Both had holes eroded through the steel. There was an odor of gas. The 2" was tied into a production line at top of wellhead however the valve was shut. At the top of the hill that production line was separated and not tied into any other line. There was no identification at wellhead and there are no tanks. The operator must make well capable of commercial production within 30 days; or plugging is required within 30 days. Failure to comply may result in Forfeiture of Bond. 3/7/2013: Mark Heins called and said he is going to head out and look at the well in question. He said it would not be until spring before they can fix anything but he would tell operator to correct/get current on any production issues. 9-9-05(A)1
1662724493 2013-02-21 Upon inspection, well was find idle with the 4.5" casing and the 2" tubing deteriorated from rust. Both had holes eroded through the steel. There was an odor of gas. The 2" was tied into a production line at top of wellhead however the valve was shut. At the top of the hill that production line was separated and not tied into any other line. There was no identification at wellhead and there are no tanks. The operator must make well capable of commercial production within 30 days; or plugging is required within 30 days. Failure to comply may result in Forfeiture of Bond. 3/7/2013: Mark Heins called and said he is going to head out and look at the well in question. He said it would not be until spring before they can fix anything but he would tell operator to correct/get current on any production issues. 9-9-05(A)10
1662724493 2013-02-21 Upon inspection, well was find idle with the 4.5" casing and the 2" tubing deteriorated from rust. Both had holes eroded through the steel. There was an odor of gas. The 2" was tied into a production line at top of wellhead however the valve was shut. At the top of the hill that production line was separated and not tied into any other line. There was no identification at wellhead and there are no tanks. The operator must make well capable of commercial production within 30 days; or plugging is required within 30 days. Failure to comply may result in Forfeiture of Bond. 3/7/2013: Mark Heins called and said he is going to head out and look at the well in question. He said it would not be until spring before they can fix anything but he would tell operator to correct/get current on any production issues. 9-9-05(A)8
1662724493 2013-02-21 Upon inspection, well was find idle with the 4.5" casing and the 2" tubing deteriorated from rust. Both had holes eroded through the steel. There was an odor of gas. The 2" was tied into a production line at top of wellhead however the valve was shut. At the top of the hill that production line was separated and not tied into any other line. There was no identification at wellhead and there are no tanks. The operator must make well capable of commercial production within 30 days; or plugging is required within 30 days. Failure to comply may result in Forfeiture of Bond. 3/7/2013: Mark Heins called and said he is going to head out and look at the well in question. He said it would not be until spring before they can fix anything but he would tell operator to correct/get current on any production issues. NONE_
1826642067 2013-05-16 Compliance action Follow-up 1662724493: Area around the wellhead was cleaned up however operator still has not resolved the identification and production issues. Well was shut in when I arrived on location. I called Mark Heins and he said Richard, WM Oil and Gas, is planning on posting id soon but did not know about the production to the state. 6/13/2013: Production has been sent in for 2012.
Retrieved from "https://wellwiki-prod.cloud.arc.gwu.edu/index.php?title=34-115-61747&oldid=2324802"