X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-155-21923

Well Details

Well ID: 34-155-21923
Loading map...
County: Trumbull
Municipality:
Operator Name: TRUMBULL RESOURCES
Well Pad ID:
Farm/Lease Name:
First Permit Date:
Last Permit Date:
Spud Date: 1981-09-01
Unconventional: No
Configuration: Vertical
Well Status: Final Restoration
Violations: 0
Latitude: 41.22406466
Longitude: -80.63534698

Production Data

PERIOD GAS QUANTITY GAS PRODUCTION DAYS CONDENSATE QUANTITY CONDENSATE PRODUCTION DAYS OIL QUANTITY OIL PRODUCTION DAYS
1984-0 16286.0 129.0
1985-0 14228.0 125.0
1986-0 8267.0 35.0
1987-0 6620.0 44.0
1988-0 5514.0 33.0
1989-0 6732.0 64.0
1991-0 1634.0 36.0
1992-0 3234.0 33.0
1993-0 4045.0 0.0
1994-0 3706.0 42.0
1995-0 3244.0 0.0
1996-0 3272.0 32.0
1997-0 0.0 0.0
1998-0 0.0 0.0
1999-0 0.0 0.0
2000-0 0.0 0.0
2001-0 0.0 0.0
2002-0 0.0 0.0
2003-0 0.0 0.0
2004-0 0.0 0.0
2005-0 0.0 0.0
2006-0 0.0 0.0
2007-0 0.0 0.0
2008-0 0.0 0.0
2009-0 0.0 0.0
2010-0 0.0 0.0
2011-0 0.0 0.0
2012-0 0.0 0.0
2013-0 0.0 0.0
2014-0 0.0 0.0 0.0 0.0

For data sources see[1]

Inspection Data

INSPECTION ID DATE DESCRIPTION COMMENT VIOLATION ID VIOLATION CODE VIOLATION COMMENT
1405430217 2014-07-14 I was on location to witness Nick's Well Plugging plug for Trumbull Resources. First, Nick ripped the 4.5 casing at 3,508'. Two joints of casing with lengths of 10' and 33.3' was removed to set the Big Lime plug. Plug #2 was set from 3,465' to 3,165'. Nick connected and established circulation with 15 barrels of water. The operator pumped 86 sacks of Class A cement. The cement was displaced with 50.3 barrels of water. Next, 84 joints of 4.5 casing was removed that contained one 10' pup joint the Ohio Shale/Surface Casing plug. Plug #3 was set from 659' to 459'. Nick connected and established circulation with 15 barrels of water. The operator pumped 60 sacks of Class A cement. The cement was displaced with 7.2 barrels of water. Next, 14 joints were removed to set the surface plug. Nick connected and established circulation. The operator pumped 62 sacks of Class A cement. I witnessed a good return of cement to surface. Nick removed the remaining 6 joint and the well was topped off with cement. A total of 104 joints of 4.5 casing plus two, 10' pup joints were removed from the well.
1407430135 2014-08-06 I was on location for a final restoration. I found the site graded. The pits was filled and closed. All debris was removed. A landowner waiver was submitted to allow natural vegetation to take over, access road would be left in place, and the production equipment to be used by the Simon #2 well. Final restoration passed.
1653942165 2013-10-01 My inspection found the well not in production. The well was equipped with a plunger lift unit. There were overgrown weeds surrounding the well. All of the flow line valves were closed indicating the well was shut-in. The tank battery contained three, 100 barrel production tanks, a concrete brine tank, and a heat, treated separator. The separator had the correct spacing from the tanks. The dike was slightly weathered; however, it meets containment requirements. The entire tank battery was surrounded by a locked chain link fence. The proper identification signs were posted at the well and production tank. The lease road was in good condition with a locked gate at the entrance and shared with permit numbers 2-2020 and 2-2948. I researched our database and found Trumbull Resources reported zero annual production since 1997. I called Trumbull Resources at 330652-2525. I left a message that a compliance notice would be issued for non-production. I gave Trumbull until 11/15/2013 to plug the well, place the well in production, or file for temporary inactive status.
-168631801 2014-07-11 I was on location to witness Nick's Well Plugging plug for Trumbull Resources. Initially, Nick attempted to pull on the tubing and found the tubing was hung in the hole. Then, the operator connected and pumped on the tubing with fresh water and found the rabbit was on bottom. Next, Appalachian Well Service arrived to shot off the tubing at two locations. First, Appalachian set up and shot off the tubing at 4,901' to set the bottom plug. Plug #1 was set from 5,129' to 4,787'. Nick connected to the tubing and bull headed 25 sacks of Class A cement. The cement was displaced to 4,787'. Another attempt was made to pull up on the tubing; however, the tubing was still hung in the hole. Then, Appalachian set up and shot off the tubing at 3,605'. Next, Nick pulled the tubing and shut-in the well for the weekend.
900383075 2014-12-08 I was on location for a follow-up inspection in reference to Compliance Notice #1653942165. Trumbull Resources filed for a plugging permit and the well was plugged on 7/14/2014 by Nick's Well Plugging.

For data sources see[2]

References

  1. "Ohio Department of Natural Resources RBDMS". [1]. 2015-06-19. Retrieved 2015-06-20. 
  2. "Ohio Department of Natural Resources RBDMS". [2]. 2015-06-19. Retrieved 2015-06-20.