X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

37-125-28624

Well Details

Well ID: 37-125-28624
Loading map...
Country: United States
State: Pennsylvania
County: Washington
Municipality: Amwell Township
Operator Name: RANGE RESOURCES APPALACHIA LLC
Well Pad ID: 154285
Farm/Lease Name: ELLIOTT JOHN 11826 8H
License Status: Active
Spud Date: 2018-12-20
Permit Date: 2018-10-31
Unconventional Well: Y
Configuration: Horizontal Well
Latitude: 40.032372
Longitude: -80.187778

For data sources see[1][2][3]

Production Data

Period Operator Name Gas Quantity (mcf) Gas Production Days Oil Quantity (bbl) Oil Production Days Water Quantity (bbl) Water Production Days
2019 RANGE RESOURCES APPALACHIA LLC 0.00 0 0.00 0 0.00 0

For data sources see[4]

Waste Data

Period Operator Waste Type Quantity Disposal Method Waste Facility ID
2019 RANGE RESOURCES APPALACHIA LLC Other Oil & Gas Wastes (in Barrels) RWC 899 420.00 Bbl REUSE (AT WELL PAD)
2019 RANGE RESOURCES APPALACHIA LLC Drilling Fluid Waste (in Barrels) RWC 803 40.00 Bbl RESIDUAL WASTE PROCESSING FACILITY
2019 RANGE RESOURCES APPALACHIA LLC Drilling Fluid Waste (in Tons) RWC 803 43.28 Tons RESIDUAL WASTE TRANSFER FACILITY 101532
2019 RANGE RESOURCES APPALACHIA LLC Synthetic Liner Materials (in Tons) RWC 806 2.06 Tons LANDFILL 100172
2019 RANGE RESOURCES APPALACHIA LLC Drill Cuttings (in Tons) RWC 810 629.67 Tons LANDFILL 100172
2019 RANGE RESOURCES APPALACHIA LLC Other Oil & Gas Wastes (in Barrels) RWC 899 211.52 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123SW019
2019 RANGE RESOURCES APPALACHIA LLC Drill Cuttings (in Tons) RWC 810 125.92 Tons LANDFILL 06-08438
2019 RANGE RESOURCES APPALACHIA LLC Drilling Fluid Waste (in Tons) RWC 803 0.46 Tons LANDFILL 100172

For data sources see[5]

Inspection Data

Inspections Performed

Inspection ID Inspection Category Inspection Date Inspection Type Inspection Result Inspection Comments
2819814 Primary Facility 2018-12-27 Drilling/Alteration No Violations Noted Ransom Drilling auger rig drilled a 30" well bore to 40 ft. and set 26" conductor casing at that depth on 12/20/18.
2824668 Primary Facility 2019-01-09 Routine/Complete Inspection No Violations Noted Today I conducted a routine inspection at the John Elliot well pad. The site was stable and PCSM controls were installed. Currently the site has an air rig on site drilling the vertical bores. This site is not producing at this time. Temporary secondary containment has been installed and is intact. No violation noted.
2829392 Primary Facility 2019-01-18 Drilling/Alteration No Violations Noted Falcon Drilling Rig #27 moved onto this well on 1/14/19 and resumed drilling at 51 ft. KB. The 20" casing was set at 482 ft. on 1/14/19 and cemented to surface with 40 bbls returned. The 13 3/8" casing was set at 809 ft. on 1/15/19 and cemented to surface with 24 bbls returned. Operator drilled to 1970 ft. and had hammer bit break on 1/17/19. Operator ran in hole with magnet and retrieved parts of hammer bit. Operator was unable to retrieve remainder of bit and decided to sidetrack. Kick plug was set from 1970 ft. to 1736 ft. Cemented with open end drill pipe from 1555 ft. Currently TOOH to pick up tri-cone bit.
2835337 Primary Facility 2019-02-01 Drilling/Alteration No Violations Noted Falcon Drilling Rig #27 sidetracked around cement plug. The 9 5/8" casing was set at 2274 ft. on 1/21/19 and cemented to surface with 20 bbls returned. TD was at 6500 ft. on 1/23/19.

For data sources see[6]

References