X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-009-23823

Well Details

Well ID: 34-009-23823
Loading map...
Country: United States
State: Ohio
County: Athens
Municipality: Troy Township
Operator Name: K & H PARTNERS LLC
Well Pad ID:
Farm/Lease Name: K & H PARTNERS LLC (SWIW #10)
License Status: Active Injection
License Date: 2013-12-09
Spud Date: 2014-01-09
Spud Drilling Contractor: MONROE DRILLING OPERATION, LLC
Final Drill Date: 2014-02-04
Well Total Depth:
Configuration: Vertical
Latitude: 39.230000
Longitude: -81.750000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2013-12-09 Proposed Formations:OHIO SHALE, Issued Date:12/9/2013, Expired Date:12/9/2015 12:00:00 PM, Drilling unit acres:49.467, Proposed Well Type:SWD, Proposed Well Class:SWIW
Correction to Well 2013-12-13 CORRECTION TO FOOTAGE.
Reached Total Depth 2014-02-04
Last Compliance Report 2014-02-13
Completion Report Received 2014-02-26
First Injection 2014-04-21
Construction Permit Expires 2015-12-09
Record Last Modified 2018-12-07

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2014-02-13 2030 3990 0
2030 3990 0
2030 3990 0

For data sources see[3]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1072993857 2018-6-20 0:00: SW No Violations 1.80
-1084819099 2014-2-11 0:00: DD No Violations 3.00
-1086549028 2019-11-25 0:00 SW No Violations 1.50
-1093941407 2014-1-24 0:00: DD No Violations 7.50
-1104094218 2015-9-2 0:00:0 SW No Violations 0.70
-1122009415 2014-2-12 0:00: DD No Violations 1.30
-1197329034 2018-6-20 0:00: SC No Violations 2.20
-1225652717 2018-12-3 0:00: SW No Violations 2.80
-1229495819 2017-8-16 0:00: SW No Violations 0.50
-1289688835 2018-8-7 0:00:0 SW No Violations 0.40
-1301443837 2014-1-29 0:00: DD No Violations 3.00
-1326438306 2019-12-17 0:00 SW No Violations 1.00
-136738281 2019-6-17 0:00: SW No Violations 1.50
-1397294629 2017-6-6 0:00:0 SW No Violations 2.00
-1433535772 2018-6-18 0:00: SW No Violations 5.00
-144619383 2015-12-8 0:00: SW No Violations 1.00
-1606638372 2014-3-24 0:00: SC No Violations 1.50
-1627684186 2014-4-30 0:00: SW No Violations 4.00
-1711096331 2016-3-8 0:00:0 AM No Violations 0.50
-174453794 2015-10-26 0:00 SW No Violations 1.00
-1841897838 2015-3-31 0:00: SW No Violations 0.50
-1853206682 2016-9-7 0:00:0 SW No Violations 1.00
-1867054306 2018-3-5 0:00:0 SW No Violations 0.40
-1871470714 2019-8-30 0:00: SW No Violations 1.60
-1887603115 2018-3-1 0:00:0 SW No Violations
-1922257704 2014-1-19 0:00: AM No Violations 0.50
-1934873669 2015-7-28 0:00: SW No Violations 0.70
-1957234113 2019-4-18 0:00: SW No Violations 1.00
-2022024804 2015-3-25 0:00: SW No Violations 3.00
-2070385452 2020-8-17 0:00: SC No Violations 0.50
-2086051485 2018-10-1 0:00: SW No Violations 2.50
-2087423215 2019-9-25 0:00: SW No Violations 1.00
-2099509676 2020-2-14 0:00: SW No Violations 1.00
-2100544335 2019-8-20 0:00: SW No Violations 1.50
-2138463527 2017-3-7 0:00:0 SW No Violations 1.50
-353280798 2016-1-13 0:00: SW No Violations 1.00
-446960120 2014-2-4 0:00:0 DD No Violations 3.00
-555548657 2020-7-21 0:00: SW No Violations 1.00
-643825230 2014-1-14 0:00: AM No Violations 0.50
-648564465 2014-1-14 0:00: DD No Violations 4.00
-728842001 2014-11-12 0:00 PL No Violations 0.50
-740729513 2014-1-22 0:00: DD No Violations
-874897178 2016-2-10 0:00: SW No Violations 1.50
-876839976 2015-5-6 0:00:0 SW No Violations 1.50
-897811031 2019-2-11 0:00: SW No Violations 1.60
-907656636 2016-3-8 0:00:0 SW No Violations 2.00
-917210060 2014-10-20 0:00 SW No Violations 1.20
0028155322 2014-04-23 Salt Water Injection Well No Violations No noted violations at well.
0039658049 2015-03-31 Salt Water Injection Well No Violations No noted violations. Review of tank construction at site.
0057039583 2018-07-05 Salt Water Injection Well No Violations Compliance Notice # 992392917 follow up inspection. Meet with ODNR/DOGRM ER Lane on site. The impoundment at 15 feet down slope of the well can be filled in. The remediation is on going for the gravel area between the injection line and the wellhead. This area tested at 3561 ppm Cl with High Range Quantab. Excavation has been scheduled for July 9th 2018. Specific Gravity of the injection water at the K&H Pump house was measured with the state issued hydrometer. The results were 1.12.
0088395762 2014-05-20 Salt Water Injection Well No Violations Collected brine sample from Central ES Truck (UIC# 25-370) 130 barrels produced water from API#47-103-02640 HG Energy. Inspected the unloading pad, injection pump, containment dike, and tanks. Recorded the injection pressure and annulus pressure. Transported the brine sample to the ODNR Lab.
0144619383 2015-12-08 Salt Water Injection Well No Violations Inspected the K&H Facility API# 3400923821, injection pressure and annulus pressure. Identification posted at the well and facility.
0174453794 2015-10-26 Salt Water Injection Well No Violations Inspected the K&H # 1 Facility API# 3400923821, Injection pump, injection pressure and annulus pressure. Identification posted at the well and facility. Annulus had a slight vacuum then went to zero psi.
0266520545 2015-02-20 Brine Hauler No Violations Inspected the unloading pads, containment dike, tanks, injection pumps and checked trucks unloading on the pads. Reviewed brine hauling logs.
0353280798 2016-01-13 Salt Water Injection Well No Violations Inspected the K&H Surface facility, injection pressure and annulus pressure.
0356800279 2017-12-05 Salt Water Injection Well No Violations My inspection revealed the salt water injection well had 61 psi on the annulus and 350 psi on the injection tubing. The tank containment area was free of fluids. Legible identification was posted.
0400991579 2018-05-04 Salt Water Injection Well No Violations Inspect the injection pressure and annulus pressure. Identification posted.
0415750824 2016-06-21 Salt Water Injection Well No Violations Inspected the K&H Surface Facility. Recorded the injection and annulus pressures.
0446960120 2014-02-04 Drill / Deepen / Reopen No Violations Witnessed partial downhole camera log of open hole section of well through Ohio Shale.
0468054770 2016-12-05 Salt Water Injection Well No Violations Surface Facility Inspection. Inspected the unloading pads, containment dike, tanks, injection pumps. Collected a brine sample from the injection line drain inside the pump house. The brine was field tested with the State issued Hydrometer, specific gravity was 1.13. A brine sample was collected for analysis at the ODNR Lab.
0497008643 2018-08-15 Surface Facility Construction No Violations K&H has installed a short pattern flanged control and choke valve at the manifold outside of the pump house. Tested the injection line from the pump house to the well. At 830 psi for 15 minutes at 5 minutes 820 psi, at 15 minutes 805 psi. Line test passed.
0544928285 2014-03-25 Salt Water Injection Well No Violations Tested injection line after replacement of fittings at the well. Tested at 575 psi with no loss in 15 minutes. Attempted to test annulus. Annulus had a vacuum when valve was first opened up. Company attempted to fill annulus with fresh water. Was unable to fill to surface with equipment on site. Rescheduled annulus test for 3-26-14.
0643825230 2014-01-14 Administrative Inspection No Violations I spoke with Kevin MacDonald the company representative this morning and he informed me the cement top had dropped back roughly 20 feet over night. We discussed remedial actions to be taken.
0648564465 2014-01-14 Drill / Deepen / Reopen No Violations Witnessed 9 5/8 surface casing cement bond log. Appalachian Wire Line Company tagged top of cement inside 9 5/8 casing at approximately 370 feet. Ran a segmented radial bond log.
0657204595 2015-01-20 Salt Water Injection Well No Violations Inspected the K&H #1 surface facility. Inspected the injection pressure and annulus pressure. The annulus was on zero. The remote monitoring sensor showed 229 psi. I called Russ Hanna (K&H Supervisor) and told him that the annulus was on zero. Russ mobilized the testing equipment and the annulus was tested at 396 psi for 15 minutes with a loss of 4 psi. The mini test passed.
0665345032 2014-01-08 Drill / Deepen / Reopen No Violations Pits dug, erosion controll in place, rig on site. Plan to spud tomorrow.
0692582682 2014-01-19 Drill / Deepen / Reopen No Violations Follow up to 1390058718. Reviewed secondary containment construction. Spoke with Devon Rains regarding corrections to be made.
0704434474 2016-10-19 Salt Water Injection Well No Violations Inspected the K&H surface facility, Injection pressure and annulus pressure. Collected a brine sample from the injection line in the pump house and tested it using the state issued Hydrometer. Specific Gravity 1.12. Note: Chiefs Order # 2016-135 modified the Max injection pressure to 530 psi.
0728842001 2014-11-12 Preliminary Restoration No Violations Preliminary Restoration requirements met.
0740729513 2014-01-22 Drill / Deepen / Reopen No Violations Witnessed 2030 feet of new 16 lb/ft production casing set in 2065 feet of 8 3/4 borehole with sacks of cement.
0748718363 2014-01-06 Drill / Deepen / Reopen No Violations Met with driller at site to discuss casing program. Building site in order to move rig onto site in a few days.
0804529555 2014-01-19 Drill / Deepen / Reopen No Violations Follow up to 1390058718. Met with Devon Rains and Charlotte Dolakof of Stonebridge to review secondary dike wall construction. The liner was found not to be water tight. Corrections are to be made in order to ensure the liner and the dike wall are liquid tight. Samples taken at the site to verify all of the contaminated soils had been removed from off site and out of the intermittent stream. None of the samples showed results higher than the EPA approved safe drinking water standards.
0837684079 2016-05-18 Salt Water Injection Well No Violations Inspected the injection pressure, annulus pressure, surface facility, 60,000 barrel tank and containment dike. The dike is free of fluids. The tank level is at 34.5. Identification posted at the well. Max injection pressure is 530 psi Per: Chiefs Order 2016-135 .
0874897178 2016-02-10 Salt Water Injection Well No Violations Inspected the injection pressure and annulus pressure. Inspected the K&H Surface Facility 3400923821. Identification posted at the well and facility.
0876839976 2015-05-06 Salt Water Injection Well No Violations Inspected the K&H # 1 surface facility, injection pressure, and annulus pressure. Good identification at well.
0897811031 2019-02-11 Salt Water Injection Well No Violations Inspected the K&H containment dike, tanks, unloading pad, injection pump, injection pressure and annulus pressure. Collected a brine sample from the injection line inside the pump house. Used the State issued hydrometer to test specific gravity. Specific gravity was 1.14. The injection pressure of 515 was observed with the state issued gauge, 515 exceeds the allowable injection pressure by 55 psi. The injection pressure was reduced (from the permit modification chiefs order 2016-135, max injection of 530 psi with specific gravity of 1.13) to the original permit pressure of 460 psi or less.
0907656636 2016-03-08 Salt Water Injection Well No Violations
0917210060 2014-10-20 Salt Water Injection Well No Violations No noted violations.
0985936605 2017-05-09 Salt Water Injection Well No Violations Inspected the K&H surface facility, The 60,000 barrel tank and containment dike, injection pressure and annulus pressure. A sample of brine was collected from the injection line inside the pump house and was tested using the State issued hydrometer. The Specific Gravity was 1.13.
0992392917 2018-06-15 Salt Water Injection Well Violations Noted At 1325 hours I received a call from ODNR emergency response team member regarding a brine release associated with this well. I arrived on site at approximately 1330 hours. I met with Project engineer Mr. Robert Rudolph who showed me the source of the leak. The leak came from the packing nut on a valve that was plumbed in line near the wellhead. This leak was detected approximately 10 minutes after it starting leaking. Mr. Rudolph met me and showed me the extent of the brine release. The brine was found in the gravel that was surrounding the wellhead. It also had escaped the gravel area and ran down hill into a low spot. K & H Partners had a vacuum truck on site to remove any free brine. I was accompanied by Mr. Nate Lane with ODNR emergency response. Mr. Lane used a soil conductivity meter to determine the extent of the brine spill. The extent of the spill area was approximately 18 feet wide and 40 feet long. The results of the soil conductivity meter ranged from 50 ppm to 2000 ppm. The brine that was in the gravel had a sump installed to allow the brine to be removed at the sump. The brine that was on the hillside was removed and placed in a lined container. The brine that was at the low point is being collected in a plastic lined sump. Photographs were taken during my inspection.
1072993857 2018-06-20 Salt Water Injection Well No Violations Compliance notice # 9923929 follow up inspection. Meet with Nate Lane ODNR-DOGRM ER and Rob Rudolph on site. The gravel area at the wellhead has been excavated and has a built up clay containment and is to be flushed with fresh water and then collected by a vacuum truck for disposal at the K&H facility. There are 8 roll off boxes on location.
1084819099 2014-02-11 Drill / Deepen / Reopen No Violations Currently drill rig mast is down and the driller is moving equipment off location. Pi is covered with a layer of ice. Pit liner is in place. Pit level is down 1.5 from lowest point.
1093941407 2014-01-24 Drill / Deepen / Reopen No Violations 7 casing test. 7 landing joint was frozen solid. Landing joint was removed and a 2 joint of 7 was threaded on the well casing, and a 7 test head was installed. 7 casing was pressurized after multiple attempts to pressure up due to freezing lines and test equipment. After many attempts it was determined to test on Monday 1-27-14. Rig plans to have heaters on site to prevent test equipment from freezing.
1104094218 2015-09-02 Salt Water Injection Well No Violations Inspected the injection pressure and annulus pressure. Identification posted at well.
1122009415 2014-02-12 Drill / Deepen / Reopen No Violations Closing the pit and removing the contaminated soils from the site.
1138100642 2014-01-21 Drill / Deepen / Reopen No Violations Total depth at the time of inspection was 1810 ft. I spoke with the driller and with Mr. Jeff Harper on site. Secondary containment was in place around the drilling site and plastic liner was in place as well.
1181483055 2016-03-08 Salt Water Injection Well No Violations Phyliss Rhinehart called to complain about excessive noise and vibrations that were shaking her floor. I explained that I was with someone from a company showing them locations of wells and would get there as soop as possible. To talk with them personally. Her husband then took the phone and explained that he went and parked in the middle of the entrance for the well but no one would stop and talk to him. I explaiend that was dangerous and not a great idea since it could get a officer invovled. I explained that I would be there as soon as possibble again.
118824825 2020-5-18 0:00: SW No Violations 2.00
1197329034 2018-06-20 Surface Facility Construction No Violations K&H crew has installed an .925 orifice plate at the injection line valve, located just outside of the pump house. The injection line is connected to a manifold at the pump house, connecting the K&H #1, #2, #3. All three injection lines were tested from the pump house to the wells. Line tested at 890 psi, at 5 minutes 885 psi, at 15 minutes 870 psi. Inspected the containment dike, tanks, unloading pads, injection pump. Tested the specific gravity of the brine from inside the pump house. The specific gravity was 1.13.
1225652717 2018-12-03 Salt Water Injection Well No Violations K&H Partners has scheduled an mechanical integrity test of the annulus. Annulus was tested at 570 psi, at 5 minutes 565 psi, at 15 minutes 560 psi. The injection tubing was shut off during the test.
1229495819 2017-08-16 Salt Water Injection Well No Violations The injection well was inspected for annulus pressure and injection tubing pressure. The injection pressure was 384 PSI, the annulus pressure was 240 PSI. The unloading pad and pump house were clean and free of fluids.
1289688835 2018-08-07 Salt Water Injection Well No Violations My inspection revealed the pollution and contamination has been removed. This satisfies the compliance notice.
1301443837 2014-01-29 Drill / Deepen / Reopen No Violations Not drilling today. Central ES crew is hauling multiple loads of water from the drill pit to the K&H # 1 injection well. Drill site is covered with snow and ice.
1377293186 2017-06-05 Salt Water Injection Well No Violations I received a request from KH Partners superintendent Rob Rudoff to witness a pressure test of a section of new line. The line was tested at 600 PSI for 15 minutes with 68 PSI drop in pressure. The test did not pass. I will be on site 6-6-17 to retest the line.
1379086862 2014-01-27 Drill / Deepen / Reopen No Violations 7 casing test. Pressured casing to 480 psi. No loss of pressure in 30 minutes. 480 psi at end of test. Witnessed pressure being released into pit.
1389271205 2014-01-08 Drill / Deepen / Reopen No Violations Drill rig is on location (mast down). Pit has been excavated. Plan to start drilling on 1-9-14. Reviewed permit with driller.
1389325401 2014-01-09 Drill / Deepen / Reopen No Violations Witnessed 96 feet of new 13 3/8 conductor set in 122 feet of 17 1/2 borehole with 114 sacks Class A cement. Circulation established and good returns seen at surface. Cement fell back roughly 10 feet and was grouted to surface using 4 sacks of Class A cement. The cement top fell again roughly 10 feet. Not enough cement on truck to top off again, will check cement top tomorrow after it has set.
1389731861 2014-01-13 Drill / Deepen / Reopen No Violations Witnessed 379 feet of new 9 5/8 surface casing set in 410 feet of 12.25 borehole with 141 sacks Class A cement. Circulation established and good returns seen at surface. During the casing pressure test roughly 2-3 Bbl of cement was burped out between the annular space and the cement top dropped an estimated 100 feet. 28 sacks of Class A cement were used to grout back to surface. The cement top continued to fall 2-3 feet while I was still there. Casing pressure test did not indicate a failure in the integrity of the surface casing string.
1389744570 2014-01-14 Drill / Deepen / Reopen No Violations Witnessed remedial grout job on surface casing. A spaghetti sting was ran down the annular space and 9 sacks of Class A cement were circulated to surface. Good returns seen at surface and did not fall back.
1389796816 2014-01-15 Drill / Deepen / Reopen No Violations Administered surface casing pressure test before drilling out the shoe. Minimum test pressure was 300 psi, actual testing pressure was 390 psi. A 15 psi loss in pressure was recorded over the 30 minute testing period which is less than the allowed 10% loss to prove casing integrity.
1390058718 2014-01-16 Drill / Deepen / Reopen Violations Noted Upon arrival at the site at 9:15 am I noted a vacuum truck on site that was drawing water from the pit. I spoke with the driller and he informed me they had hit water in the Injun Sandstone at 1432 feet and the pit had started to take on water. He also informed me the pit had begun overflowing shortly before I arrived, around 9am. An estimated 40 Barrels of formation water had left the pit and crossed the location and entered a small intermittent stream nearby, roughly 60 feet away. I noted drilling soap foam in sections of the creek and that the pit water was currently entering the stream. A section of the stream was dammed with soil near the source of the contamination and again roughly 250 feet downstream from the source with straw filled erosion control socks. Water samples were taken at the source, 250 feet downstream from the source, and in a separate upstream fork of the stream roughly 50 feet from where the two stream converge as a control sample. Drilling operations shall cease until further notice by the DOGRM. All contaminated materials, including drilling fluids and soil, shall be removed from environment and disposed of properly. Drilling location shall be isolated from environment by a secondary containment system in order to prevent further contamination.
1390312846 2014-01-13 Drill / Deepen / Reopen No Violations Currently drilling out from bottom of the conductor casing. Surface casing is on site. Drill pit is constructed with a plastic liner. Accompanied by Andrew Adgate UIC Geologist.
1390330892 2014-01-17 Drill / Deepen / Reopen No Violations Follow up to 1390058718. Met with Trevor Irwin of the Ohio Environmental Protection Agency Emergency (OEPA) Spill Response. Witnessed Central Environmental Services removing contaminated waters and soils from the stream bed with a vacuum truck. An estimated 40 Barrels of soil and water had been removed by the vacuum truck thus far, including yesterday evening. Samples 14 and 15 were taken in the stream bed after excavation and found to have 30ppm and 36ppm Chloride content respectively. Sample 16 was taken from soil just before stream enters culvert and had 720ppm Chloride content. Reviewed timeline of events with Jeff Harper of Central Environmental Services and discussed remediation efforts. Met with Kerry Brown of Monroe drilling, Trevor Irwin of the OEPA, and Devon Rains of Central Environmental to discuss remediation plans. Most of the remaining contaminated soils of site of the drilling pad were removed that evening, an estimated 12 tons thus far.
1390415470 2014-01-22 Drill / Deepen / Reopen No Violations Currently drilling at 2050 feet, plan to reach total depth for this segment of the well bore at 2070. Will be setting roughly 2030 feet of 7 past the Berea Sandstone and cementing all the way back to surface.
1390494502 2014-01-17 Drill / Deepen / Reopen No Violations Meet with Inspector Josh Garland and Trevor Irwin OEPA on site to coordinate the removal of contaminated fluids and soil from the drill pit spill on 1-16-14. Drilling equipment had to be moved and then we met with representatives from Central Environmental Services to review the logistics of the site remediation plan. Equipment was brought in to remove fluids and soil from the intermittent stream. On site testing was done to monitor chloride levels in the water and soil. Contaminated areas were delineated for soil removal.
1390942057 2014-01-28 Production Wells No Violations Witnessed bond log of 7 production casing. Tagged bottom at 1960 feet inside 7 casing. Cement top measured with bond log at 48 feet. Remedial cement job will performed to bring cement 50 feet to surface.
1391110919 2014-01-30 Drill / Deepen / Reopen No Violations Collected GPS data and worked on reports while waiting for remedial cement job on the backside of the 7 production casing. The job was eventually cancelled and rescheduled for tomorrow.
1391190469 2014-01-31 Drill / Deepen / Reopen No Violations Witnessed remedial grout job on backside of 7 production casing. 10 sacks of Class A neat cement was used to grout from 50 to surface.
1391463672 2014-02-03 Drill / Deepen / Reopen No Violations Currently drilling at 3150 feet. Dusting through the Ohio Shale right now, formation is not making water. Plan to log hole tomorrow.
1391551969 2014-02-04 Drill / Deepen / Reopen No Violations Tripped drill string and bit out of well. Appalachian Well Surveys ran a down hole camera to total depth. Log open hole.
1391724597 2014-02-06 Salt Water Injection Well No Violations Witnessed injectivity test and Gamma Ray log. Pumped 10500 gallons KCL water with tracer from ProTechnics.
1391785663 2014-02-07 Drill / Deepen / Reopen No Violations Stopped by site to witness packer being set. Company is not ready to do work and UIC inspector Jon Scott will stay at site to witness job.
1391796676 2014-01-22 Drill / Deepen / Reopen No Violations Witnessed 2033 of new 7 production casing set in 2065 of 8 3/4 borehole with 330 sacks of class A cement. 170 sacks lead ran with 3% gel and 160 sacks tail ran with 2% gel.
1391810050 2014-02-07 Salt Water Injection Well No Violations Witnessed the installation of the packer and tubing. New 2 3/8 tubing with a new Parmaco packer set at 1976. Annulus filled with 80 barrels fresh water and 2 gallons inhibitor. Fluid level was not at surface. Rig crew working on pulling more tension on the packer and filling annulus again. Annulus test scheduled for the 2-10-14.
1392059084 2014-02-10 Salt Water Injection Well No Violations Rig crew was waiting on a load of fresh water to fill the annulus. A Central ES truck arrived and unloaded 30 barrels fresh water into the tank on site. Rig crew connected the tank to the annulus and started to fill annulus. Water was not at surface. Rig crew attempting to release and to reset the packer. I had to leave site due to another scheduled UIC test. Returned to location at 5:00pm and tested the annulus at 502 psi for 15 minutes. Lost 2 psi in 15 minutes. Annulus test passed.
1392392908 2014-02-14 Drill / Deepen / Reopen No Violations Field soil samples taken at site as part of reclamation process. A rough grid was set up across the site and 15 samples were taken on 15 foot intervals. A sample was also taken in the creek at the site of the heaviest contamination. Most of the samples, including creek sample, had Chloride levels around 50-60 ppm Chloride content. One sample had 189 ppm Chlorides but is still below the EPA fresh water drinking standard. Production company has begun seeding and mulching are to ensure vegetative cover. The berm used as the secondary containment had the liner removed and was left in place as protection for the creek against possible future issues.
1394216152 2014-03-07 Surface Facility Construction No Violations Test 500 feet of 3 inch injection line (Flex Pipe Systems FL801 10-27-2013 Made in Canada, 0068 m API 17J/ISO 13628-2) installed from the well to the flanged fitting approximately 10 feet out side the K&H pump building. The injection line has been installed in a 6 inch SDR 23.5 ABS conduit from the pump building to the well. The line was filled with fresh water and tested at 645 psi for 15 minutes with a loss of 5 psi. End line pressure was 640 psi. The plan is to bury the tested portion of the injection line at the well and to leave the other end of the injection line ditch open for the installation and testing of the complete line.
1395944431 2014-03-27 Salt Water Injection Well No Violations Currently moving service rig on location. Installing mats due to thick mud on well site. Plans are to release packer and trip tubing and packer out of well.
1396028573 2014-03-28 Salt Water Injection Well No Violations Perkins Oil and Gas service rig connected to the tubing. The tubing weight was approximately the same as the tubing string weight with no tension on the packer. Tubing string weight 23,000 lbs. Pulled 9,000 lbs over the string weight and then attempted to fill the annulus with fresh water. Added 3 barrels fresh water to annulus. Tested the annulus at 500 psi for 15 minutes. At 5 minutes pressure was 495 psi. at 15 minutes pressure was at 490 psi. Test passed. Company assembled the injection line to the injection tubing and tested the injection line at 500 psi for 15 minutes. Tested from the pump house to the master valve. Line test passed with no loss in 15 minutes.
1397294629 2017-06-06 Salt Water Injection Well No Violations I witnessed a line pressure test. KH Partners installed a new check valve at the wellhead requiring a pressure test to be performed. The test was started at 610 PSI and was held for 15 minutes. The pressure loss was 7 PSI in the 15 minute test. The test passed, the allowable loss was 30.5 PSI.
1398110368 2014-04-21 Salt Water Injection Well No Violations Witnessed initial injection operations. Prior to injection annulus had slight vacuum. The annulus was filled with 35 gallons fresh water and tested at 468 psi. At 5 minutes 465 psi, at 15 minutes 460 psi. Annulus test passed. A Silversmith electronic cut off switch is set to shut off at 460 psi on the injection pump. The flow meter is installed at the well head. The flow, annulus pressure and injection pressure are electronically monitored and recorded. Initial injection pressure was 350 psi for approximately 1 minute then declined to zero and was either zero or on vacuum. This well is using the existing surface facility for the K&H # 1 34-009-23821-00-00.
1418924759 2014-12-18 Salt Water Injection Well No Violations Inspected the injection pressure and annulus pressure. Inspected the K&H # 1 Surface facility , containment dike, unloading pads, tanks, injection pumps.
1420743022 2015-01-08 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, recorded injection pressure and annulus pressure. Checked brine trucks unloading on pad. Reviewed brine hauling records.
1431749045 2015-02-10 Salt Water Injection Well No Violations Inspected the K&H # 1 surface facility, injection pressure and annulus pressure. Reviewed plans for new containment dike currently under construction. Met with John Morrison and Rose Excavating.
1433535772 2018-06-18 Salt Water Injection Well No Violations Compliance Notice # 992392917 follow up inspection. There are four roll off boxes with contaminated material on site. Remediation of the contaminated area is ongoing. High Range Quantabs were used to test standing water with in the remediation area. At the wellhead, in gravel maxed out the high range Quantab above 6298 ppm Cl. At 6 feet from the wellhead in an excavated area it maxed out the quantab above 6298 ppm Cl. Quantabs were used to test upslope from the excavated area and had zero ppm Cl. Four locations within the drainage ditch were tested from upslope to the Plastic lined collection point down slope. Results were: 1895 ppm Cl, 541 ppm Cl, 593 ppm Cl, 1481 ppm Cl. Quantabs were used to test downslope of the plastic lined collection point, with zero ppm Cl. Met with Rob Rudolph on site to discuss the results of field testing. The remediation is to continue removing brine from the gravel area surrounding the wellhead. And to collect all run off from the plastic lined collection point. All fluids are to be disposed at the K&H facility. The contaminated soils are waiting on a soil profile before being sent to an EPA approved landfill.
1479480545 2016-11-17 Salt Water Injection Well No Violations Key Energy service rig pulled the 2 3/8 tubing and packer. Installed a rebuilt Parmaco 4.5 x 7 packer and 1942.27 feet of new 4.5 J-55, 10.5 lb tubing. Circulated fresh water and inhibitor to surface. Set packer and test annulus at 630 psi. at 5 minutes 625 psi, at 15 minutes 620 psi.
1528198403 2018-05-31 Surface Facility Construction No Violations Witnessed a new pressure reducing valve being installed at the well site. Pressure tested the injection line from the injection line valve to the injection tubing master valve at 565 psi. at 5 minutes 560 psi, at 15 minutes 555 psi.
1530110701 2018-06-27 Salt Water Injection Well No Violations Compliance Notice # 992392917 follow-up inspection. Meet with ODNR-DOGRM Nate Lane ER on site. Remediation is on going. Field tested with High Range Quantabs. Water at the well site 4915 ppm Cl, At 3 feet down slope of the well site 708 ppm Cl, at the earthen dam collection point 402 ppm Cl. The intermittent stream was tested by Nate Lane ER with conductivity meter. The stream tested less than 250 ppm Cl.
1557942699 2019-5-13 0:00: SW No Violations 1.00
1606638372 2014-03-24 Surface Facility Construction No Violations Injection line test. Tested at 586 psi for 15 minutes with no loss in pressure.
1627684186 2014-04-30 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pumps, injection pressure and annulus pressure. Good identification at the well and containment dike. Annulus pressure was zero on the state gauge. There was no fluid in the fitting when the state gauge was removed. Facility operator is going to do a mini test on the annulus. They have a continuous monitoring system installed for the injection pressure and annulus pressure. Injection pressure was maintained during the inspection with no change to the annulus pressure.
1637553441 2017-05-04 Surface Facility Construction No Violations Currently installing the primary Baker injection pump. Injection operations are off line during the pump installation.
1711096331 2016-03-08 Administrative Inspection No Violations Jon Scott returned my call and I briefly explained what was going on. He gave me a contact number for Rob Rudolf the facility manager. I called Rob and explained there was a complaint for excessive noise then asked if there was anything going on outside of ussual activites at the site. He then said they were sucking out a tank bottom and that the pump was very noisy. He appologized and said it was something that does not happen very often maybe 2 or 3 times a year. I thanked him and then called Phyliss back to explain they were just sucking out a tank and that is why the noise was coming and going. She thanked me for the information and following up with them.
1743854730 2019-12-5 0:00: SC No Violations 1.40
1807693497 2014-01-13 Drill / Deepen / Reopen No Violations Currently drilling at 300 feet. 2-4 centralizes to be ran on the 9 5/8 surface casing.
1841897838 2015-03-31 Salt Water Injection Well No Violations Inspected the injection pressure and the annulus pressure. Good identification at the well.
1853206682 2016-09-07 Salt Water Injection Well No Violations Inspected the injection pressure, annulus pressure, and the 60,00 barrel storage tank and containment dike. The containment dike was free of fluids. Identification posted at the well.
1867054306 2018-03-05 Salt Water Injection Well No Violations The salt water injection well was written up for 1501: 9-3-07 (D) exceeding maximum allowable injection pressure. The injection tubing had 425 psi and the annulus had 55 psi. The containment dike was free of fluids. This satisfies the compliance notice issued on 3.1.2018.
1887603115 2018-03-01 Salt Water Injection Well Violations Noted The Division received annual report form 204. Review of the form 204 revealed an exceedance of the maximum allowable injection pressure. The injection pressure shall be reduced and the auto shut down switch shall be adjusted to the maximum allowable injection pressure. A follow-up inspection will be conducted.
1896548874 2014-09-04 Salt Water Injection Well No Violations Inspected the annulus pressure, injection pressure, unloading pad, containment dike, tanks, injection pump, and checked brine hauling logs on trucks unloading on the pad. Good identification posted at the well and surface facility.
1912545646 2015-01-13 Salt Water Injection Well No Violations Inspected the K&H # 1 surface facility, Currently beginning construction on the new containment dike. Took GPS coordinates on the proposed K&H # 3 well stake. Recorded the injection pressure and annulus pressure. Reviewed construction plans with John Morrison.
1922257704 2014-01-19 Administrative Inspection No Violations Follow up to 1390058718. I spoke with the owner and the secondary containment construction contractor. I was assured the dike had been constructed to our suggested specifications. I hen contacted Dave Claus and was given the go ahead to allow the company to begin drilling operations once more.
1934873669 2015-07-28 Salt Water Injection Well No Violations Inspected the injection pressure, annulus pressure, and the surface facility of the K&H#1 34-009-23821.
1957234113 2019-04-18 Salt Water Injection Well No Violations Inspection with ODNR DOGRM UIC Supervisor. Inspected the injection pressure and annulus pressure. Identification is posted.
1965439051 2014-01-14 Drill / Deepen / Reopen No Violations Witnessed a bond log run on the surface casing to determine any potential problems with the cement bond. Cement was tagged inside the pipe at 367 feet, total surface casing ran was 378 so there is still cement inside the pipe. Log showed 100% bond from total depth to 150 feet. After that there was not enough hydrostatic pressure to get accurate reading with logging tools. A plumb bob was used to measure the top of cement between the surface casing and the conductor and was found to be around 12 feet. A remedial grout job will be performed tonight to bring cement top to surface, after cement has set up a surface casing pressure test will be administered in order to verify casing integrity before drilling commences.
2022024804 2015-03-25 Salt Water Injection Well No Violations Inspected the injection pressure and annulus pressure. The K&H # 1 surface facility was inspected . Identification posted at the well.
2085305885 2014-01-18 Drill / Deepen / Reopen No Violations Follow up to 1390058718. Upon arrival it was noted much of the contaminated soils off site had been removed. Some of the contaminated soils had been used to construct the secondary containment dike wall, so all of the contaminated soils were removed from dike wall and construction was completed using uncontaminated soils. A 6 inch corrugated flex line was laid and buried from above the site, where a natural spring ran into the site, to the intermittent stream below in order to prevent the spring from flowing into the pit. Work began laying the liner for the dike wall of the secondary containment. An estimated 8-10 tons of contaminated soils were removed from the site.
2086051485 2018-10-01 Salt Water Injection Well No Violations Inspected the containment dike, tanks, injection pump, injection pressure and annulus pressure. Collected a field sample of brine from the outlet side of the injection pump for field testing with the State issued Hydrometer. The specific Gravity was 1.12. The containment dike is free of fluids. Identification is posted at the well and facility.
2117588945 2018-07-09 Salt Water Injection Well No Violations Compliance Notice # 992392917 follow up inspection. Meet with ODNR-DOGRM ER Lane on site. K&H crew excavated the gravel and contaminated soil at the well site. The contaminated material was placed in roll off boxes. Field testing of the soil by ER Lane determined that the contaminated material had been removed. The site is approved for back filling and grading the location. Met with Jeff Harper and Rob Rudolph on site. There are seven roll off boxes on location. The contaminated material has been sampled and K&H is waiting on the soil profile for final disposal.
2122976613 2018-09-17 Salt Water Injection Well No Violations Inspected the containment dike, tanks, injection pump, injection pressure, annulus pressure and unloading pad. Collected a brine sample from the pump house to measure specific gravity with the state issued Hydrometer. Specific gravity was 1.12.
2137466464 2015-07-16 Salt Water Injection Well No Violations Inspected the K&H #1 surface facility, Injection pressure, and annulus pressure.
2138463527 2017-03-07 Salt Water Injection Well No Violations Inspected the K&H # 1 surface facility 34-009-23821. Collected a brine sample from the injection line drain inside the pump house. Checked the specific gravity of the sample with the State issued Hydrometer. Specific Gravity was 1.12. Identification is posted.
266520545 2015-2-20 0:00: BH No Violations 4.50
28155322 2014-4-23 0:00: SW No Violations 1.50
285830245 2019-8-21 0:00: SW No Violations 2.20
351184356 2020-5-18 0:00: SC No Violations
356800279 2017-12-5 0:00: SW No Violations 1.50
39658049 2015-3-31 0:00: SW No Violations 1.30
400991579 2018-5-4 0:00:0 SW No Violations 0.50
415750824 2016-6-21 0:00: SW No Violations 1.00
468054770 2016-12-5 0:00: SW No Violations 2.00
497008643 2018-8-15 0:00: SC No Violations 1.70
544928285 2014-3-25 0:00: SW No Violations 6.00
57039583 2018-7-5 0:00:0 SW No Violations 4.00
591907589 2020-8-3 0:00:0 SW No Violations 0.70
657204595 2015-1-20 0:00: SW No Violations 2.50
665345032 2014-1-8 0:00:0 DD No Violations 1.30
692582682 2014-1-19 0:00: DD No Violations 2.50
704434474 2016-10-19 0:00 SW No Violations 1.00
748718363 2014-1-6 0:00:0 DD No Violations 0.50
804529555 2014-1-19 0:00: DD No Violations 2.60
837684079 2016-5-18 0:00: SW No Violations 4.00
88395762 2014-5-20 0:00: SW No Violations 4.00
985936605 2017-5-9 0:00:0 SW No Violations 1.30
992392917 2018-6-15 0:00: SW No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
0992392917 US-OH-131390 2018-08-17 9-3-04(A) Pollution/Contamination
1390058718 US-OH-111531 2014-01-28 Drilling operation causing pollution and contamination
1390058718 US-OH-111532 2014-01-28 Pit insufficient size to contain oil, brine, cuttings
1390058718 US-OH-111533 2014-01-28 Dike or pit not able to prevent escape of Brine or other wastes
1887603115 US-OH-118957 2018-03-27 9-3-07(D) Exceeding maximum allowable injection pressure

For data sources see[4]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://wellwiki-prod.cloud.arc.gwu.edu/index.php?title=34-009-23823&oldid=14214513"