X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-013-61585

Well Details

Well ID: 34-013-61585
Loading map...
Country: United States
State: Ohio
County: Belmont
Municipality: Wayne Township
Operator Name: AMERICAN ENERGY CORP.
Well Pad ID:
Farm/Lease Name: PITTMAN HAROLD
License Status: Final Restoration
License Date: 2015-01-02
Spud Date:
Spud Drilling Contractor:
Final Drill Date: 1925-04-01
Well Total Depth: 1273.00 ft
Configuration: Vertical
Latitude: 39.930000
Longitude: -81.020000

For data sources see[1]

Well History

Well Status Well Status Date Comment
Completed 1925-04-01 WELL TO BE RE-PLUGGED
Reached Total Depth 1925-04-01 WELL TO BE RE-PLUGGED
APP 2004-09-21 Proposed Formations:MAXTON, Issued Date:9/21/2004, Expired Date:9/21/2005 6:00:00 AM, Drilling unit acres:0, Proposed Well Type:OG, Proposed Well Class:
Change of Owner 2014-12-19 Operator changed from 6848, BISHOP WELL SERVICES CORP. to 7188, AMERICAN ENERGY CORP
APP 2015-01-02 Proposed Formations:, Issued Date:1/2/2015, Expired Date:1/1/2017 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:OG, Proposed Well Class:
Plugged/Abandoned 2015-02-24 WELL TO BE RE-PLUGGED
Completion Report Received 2016-11-29 WELL TO BE RE-PLUGGED
Construction Permit Expires 2017-01-01 WELL TO BE RE-PLUGGED
Record Last Modified 2017-02-15 WELL TO BE RE-PLUGGED

For data sources see[2]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1063162468 2005-2-8 0:00:0 OR No Violations
0524254078 2005-04-14 Plug / Plug Back No Violations 1325 OF 1.5 RUN TO BOTTOM. COULD NOT PULL 6. TO PLUG TOMMORROW
1063162468 2005-02-08 Orphan No Violations BISHOP WELL SERVICE, LOCATING LOCATION, CHECKING LOCATION.
1129290956 2005-10-14 Final Restoration No Violations ORPHAN WELL RESTORATION
1424965167 2015-02-24 Plug / Plug Back No Violations On the date of inspection I am on site to witness the re-plugging and abandonment of the well for coal mining purposes. I am accompanied by ODNR Inspector Patrick Shreve. The well was previously plugged and abandoned through the Orphan Well Program. I was informed by Coastal Drilling representative Mark Wilson that the Coastal Drilling 220 rig had set a 16 inch diameter conductor weighing 65lbs/ft to a depth of 20 feet. I was not notified and did not witness the conductor being set. The rig then drilled to a total depth of 1239 feet below the Kelly Bushing (KB) at a height of 10 feet above ground surface. The following bit sizes were used to drill out the previously plugged well: 12.25 inch diameter from surface to 109 feet, 9.875 inch diameter hole from 109 to 698 feet, and 7.875 inch diameter from 698 to 1239 feet. No casing was present in the hole, except small, irretrievable pieces of junk metal. Coastal then completed a Gamma Well Log, Magnetic Deviation Log, and a Caliper Gamma Log. The Pittsburgh coal seam was logged from 377 to 382 feet in depth. Based on the information obtained from the logs, the following open-hole sections were calculated for cementing purposes: 1220 to 840 feet for 8 inch diameter, 840 to 780 feet for 10 inch diameter, 780 to 710 feet for 8 inch, 710 to 490 feet for 11 inch, 490 to 110 feet for 10 inch, and 110 feet to surface for 15 inch. Three plugs were set through 3.5 inch, 13.3lbs/ft drill pipe to bring cement to surface. Omega Cementing pumped 140sk of Class A cement, 13.1ppg, 1.92 yield, 8% gel. Cement was displaced with 4.4bbl of water. 20 joints of drill pipe joints averaging 31 feet were pulled. Omega pumped 160sk of Thixotropic cement, 14.7ppg, 1.27 yield, 2% Gypsum, 2% CaCl2, 2% Gel, and one gallon of yellow dye across the coal seam. Cement was displaced with 1.8bbl of water. Eleven joints of drill pipe were pulled. The cement was allowed to cure for approximately one hour then was tagged at 241 feet with drill pipe. Omega p
1956766901 2005-04-11 Orphan No Violations LOOKING AT 6. 1 INSIDE 6, THE 1 IS GASSING. TRYING TO GET 1.5 OVER THE 1 TO GET DOWN TO A POINT WHERE WE CAN CEMENT TO WHERE THE WELL CAN BE SHUT OFF AND PLUGGED TO SURFACE. COAL COMPANY HAS BEEN IN CONTACT WITH DAVE BISHOP AND INFORMED HIM TO PLUG WELL TO OIL/GAS STANDARDS AND THEY WOULD PLUG TO FEDERAL STANDARDS IF AND WHEN THEY MINE THRU THE WELL SITE.
524254078 2005-4-14 0:00: PB No Violations

For data sources see[3]

References