X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-019-22698

Well Details

Well ID: 34-019-22698
Loading map...
Country: United States
State: Ohio
County: Carroll
Municipality: Center Township
Operator Name: PENNENERGY RESOURCES LLC
Well Pad ID: US-OH-000805
Farm/Lease Name: GRUNDER UNIT
License Status: Producing
License Date: 2015-06-18
Spud Date: 2015-10-05
Spud Drilling Contractor: SIDEWINDER DRILLING INC
Final Drill Date: 2016-01-01
Well Total Depth: 13941.00 ft
Configuration: Horizontal
Latitude: 40.600000
Longitude: -81.080000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2015-06-18 Proposed Formations:UTICA THRU POINT PLEASANT, Issued Date:6/18/2015, Expired Date:6/17/2017 12:00:00 PM, Drilling unit acres:596.48, Proposed Well Type:OG, Proposed Well Class:POOL
Plugged Back 2015-12-26
Reached Total Depth 2016-01-01
Correction to Well 2016-03-11 change in target/take per as-drilled plat-ALE
Completion Report Received 2016-06-15
Construction Permit Expires 2017-06-17
Change of Owner 2018-10-03 Operator changed from 8894, R E GAS DEVELOPMENT LLC to 10212, PENNENERGY RESOURCES LLC
Record Last Modified 2018-10-03

For data sources see[2]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 01/16/2016 01/25/2016 7520 11,616,700.0 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 Iron Control, FEAC-20 Trican Iron Control Citric acid 77-92-9 30 0.00110705 1240.73
Acetic acid 64-19-7 45 0.00166058 1861.1
Breaker, WBO-2 Trican Gel Breaker Sodium Persulfate 7775-27-1 100 0.000122507 137.3
Water Rex Energy Carrier/Base Fluid Water 7732-18-5 100 86.5021 96,947,500.0
Sand (Proppant) Trican Proppant Crystalline silica: Quartz (SiO2) 14808-60-7 100 12.3251 13,813,400.0
Chlorine Dioxide Baker Hughes Biocide Chlorine Dioxide 10049-04-4 0.3 0.00082 760.41
Other Chemicals Potassium Chloride 7447-40-7 0 0.000265 0
Sodium Chloride 7647-14-5 0 0.000265 0
Water 7732-18-5 0 0.013265 0
2-propenoic, polymer with sodium phosphinate, sodium salt. 71050-62-9 0 0.005306 0
ScaleSorb 12 Baker Hughes Scale Inhibitor Sodium Chloride 7647-14-5 5 0.000151 140
Sodium Salt of Polyamino Phosphonate 1252600-17-1 20 0.000604 560
Crystalline silica: Quartz (SiO2) 14808-60-7 1 0.00003000 28
Water 7732-18-5 30 0.000906 840
Phosphonic acid, sodium salt 15475-67-9 5 0.000151 140
Diatomaceous Earth, Calcined 91053-39-3 50 0.00151 1400
Phosphorous Acid 13598-36-2 1 0.00003000 28
Scaletrol 720 Baker Hughes Scale Inhibitor Ethylene Glycol 107-21-1 30 0.007959 7381.7
Calcium Chloride 10043-52-4 5 0.001327 1230.28
Parasorb 5005 Baker Hughes Paraffin Inhibitor Crystalline silica: Quartz (SiO2) 14808-60-7 1 0.00007500 70
Mineral oil 8042-47-5 5 0.000377 350
Trimethylbenzenes 95-63-6 0.5 0.00003800 35
Diatomaceous Earth, Natural (kieselguhr) 61790-53-2 5 0.000377 350
Chrystalline Silica: Cristobalite 14464-46-1 1 0.00007500 70
Acetic acid etheynl ester, polymer with ethene 24937-78-8 5 0.000377 350
Naphthalene 91-20-3 1 0.00007500 70
Calcined Diatomaceous Earth 91053-39-3 100 0.007548 7000
Heavy Aromatic Naphtha 64742-94-5 10 0.000755 700
Olefin/Maleic Ester 68188-50-1 30 0.002264 2100
Acid Inhibitor, AI-11 Trican Acid Inhibitor Potassium iodide 7681-11-0 5 0.00007818 87.623
Propargyl alcohol derivative Proprietary 60 0.000938181 1051.47
Prop-2-yn-1-ol 107-19-7 1 0.00001564 17.525
Hydrochloric Acid (7.5%) Trican Acidizing Water 7732-18-5 92.5 1.0119 1,121,200.0
Hydrochloric Acid 7647-01-0 7.5 0.08118 90908.3
ECM PR Pro 200 Third Party Friction Reducer Ethoxylated alcohols 68551-12-2 4 0.00313369 3512.1
Hydrotreated Petroleum Distillate 64742-47-8 35 0.0274198 30730.8
2-Propenoic acid, ammonium salt,

polymer with 2-propenamide, sodium salt

910644-97-2 45 0.035254 39511.1
Ethoxylated alcohols 68439-50-9 4 0.00313369 3512.1
Ethoxylated alcohols 68002-97-1 4 0.00313369 3512.1
Ammonium acetate 631-61-8 12 0.00940108 10536.3
Water 7732-18-5 50 0.0391712 43901.2
Slurry Gel, WG-111L Trican Gel Mineral oil/ light hydrotreated pet. distillate 64742-47-8 60 0.00775876 8695.66

For data sources see[3]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2016 R E GAS DEVELOPMENT LLC 564045 73731 308
2017 R E GAS DEVELOPMENT LLC 456444 30617 357
2018 PENNENERGY RESOURCES LLC 296655 41005 347
2019 PENNENERGY RESOURCES LLC 60450 3089 78

For data sources see[4] [5]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2016 R E GAS DEVELOPMENT LLC Brine 16749 308
2017 R E GAS DEVELOPMENT LLC Brine 9924 357
2018 PENNENERGY RESOURCES LLC Brine 4635 347
2019 PENNENERGY RESOURCES LLC Brine 1101 78

For data sources see[6] [7]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1572097443 2016-1-27 0:00: PW No Violations
-650770294 2017-6-29 0:00: PW No Violations
-984450507 2018-6-27 0:00: PW No Violations 2.00
0445492526 2019-01-31 Production Wells No Violations The well was equipped with a plunger-lift assembly. The surface/intermediate annular gauge displayed zero psi, and the intermediate/production annular gauge displayed 490 psi. The well was recently transferred to PennEnergy Resources LLC, and updated identification was posted. No violations were observed at the time of inspection.
0650770294 2017-06-29 Production Wells No Violations I was on site with DOGRM Tom Hill, Bob Worstall, and Terry Whitehair, along with R.E Gas Development personnel to drilling an additional three wells (PN# 22553, 22732, 22733) on the pad. I performed a walk-around inspection while on site. The well is equipped with an open-flow assembly. I was unable to locate a clear surface-intermediate pressure gauge on the well. I spoke to R.E. Gas Development to have a gauge installed on the surface-intermediate annulus and labelled.
0984450507 2018-06-27 Production Wells No Violations I conducted a status check of the well and production pad. Seven producing wells are located on the pad (permit numbers (2528, 2530, 2498, 2554, 2486, 2553, 2529). This well is equipped with an open flow assembly. The surface-intermediate annulus was equipped with a pressure-relief valve and a pressure gauge which displayed a reading of zero psi. Identification was posted at the well and lease entrance. The production tanks and production equipment were surrounded by a lined steel dike. Less than an inch of standing water was present in areas inside the tank battery. I tested the standing water for chlorides using a low-range QuanTab which concluded in a reading of less than 33 ppm. The access road was stable and drivable. Erosional controls were in place and appeared functioning.

Equipment on the pad consisted of the following: Fifteen 400 bbl production tanks; eight labelled as containing condensate and seven as containing produced water Seven gas processing units with vertical separators Two combustor units Three vapor recovery units One oil stabilization unit and tower

1026674310 2019-10-24 0:00 PW No Violations
1141229246 2019-10-30 0:00 PW No Violations 0.90
1157458362 2017-06-15 Production Wells No Violations I conducted a status check of this well. Identification signs were posted at the access road entrance, the well, and the storage tanks. The access road was equipped with a gate and was locked. The #2H well is in production and is equipped with an open flow assembly. The production tanks are surrounded by a steel dike. A sound barrier wall was installed on the north side of the pad.

The equipment on the pad consists of the following: 7 producing wells

7 sand separators 7 gas processing units 1 vapor recovery unit 1 heat treater

No violations were noted at the time of inspection.

1450189429 2015-12-14 Casing String Witnessed No Violations I was on the Grunder # 2H to witness the cementing of the 13.375 surface casing. Sidewinder Drilling Rig # 62 drilled a 17.5 diameter hole to 1014 KB. A water flow( approximately 300 - 400 barrels ) of water was encountered at ~ 710 KB. Kerzey Casing Service ran 22 joints of 13.375, 54.5 lb./ft., buttress thread and collar casing to 953 KB. Schlumberger conditioned the well bore with 50 barrels of gelled spacer followed by ten (10) barrels of fresh water. Schlumberger mixed and pumped 196 barrels of Class A cement slurry, displaced the slurry with 140 barrels of fresh water and a top plug. The plug landed at 445 psi and was bumped to 1025 psi for five (5) minutes without any pressure decline. One half (1/2) barrel flowed back and stopped. All floats held. No violations were identified
1572097443 2016-01-27 Production Wells No Violations I was on the Grunder Pad to assess the work being conducted after stimulation of the Grunder #2 well. All frac pumping equipment has been removed from location. Remaining equipment included sand storage silos, brine tanks and fresh water manifolds. Per Larry Boone ( co-man for Rex ) the drill out of the kill bridge plug should start on 1/28/2016 after which it is anticipated that 2.375 tubing will be ran in the 5.5 casing. Due to directional drilling problems, I requested Larry Boone to monitor the annular pressures of the 13.375 and 9.625 casing. No violations were identified during this inspection.
445492526 2019-1-31 0:00: PW No Violations
459113578 2019-8-27 0:00: PW No Violations 0.80
641024211 2020-4-2 0:00:0 PL No Violations 1.00
860207613 2019-10-28 0:00 PW No Violations 0.90

For data sources see[8]

References