X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-029-21713

Well Details

Well ID: 34-029-21713
Loading map...
Country: United States
State: Ohio
County: Columbiana
Municipality: Madison Township
Operator Name: GEOPETRO LLC
Well Pad ID: US-OH-000387
Farm/Lease Name: ROSEBUD 16-10-2
License Status: Producing
License Date: 2017-08-14
Spud Date: 2012-03-13
Spud Drilling Contractor: NOMAC DRILLING CORP
Final Drill Date: 2012-03-30
Well Total Depth: 13000.00 ft
Configuration: Horizontal
Latitude: 40.680000
Longitude: -80.700000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2012-02-16 Proposed Formations:POINT PLEASANT, Issued Date:2/16/2012, Expired Date:2/15/2014 12:00:00 PM, Drilling unit acres:130.1, Proposed Well Type:OG, Proposed Well Class:EDPW
Reached Total Depth 2012-03-30 TEMPORARY INACTIVE CHECKLIST REC'D FROM CO ON 03/22/2016
Correction to Well 2012-08-31 CHANGE IN UNIT SIZE TO 138.40 ACRES. CORRECTION TO TARGET INFORMATION: FOOTAGE & X,Y COORDINATES FROM AS DRILLED SURVEY.
APP 2015-06-02 Proposed Formations:POINT PLEASANT, Issued Date:6/2/2015, Expired Date:6/1/2017 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:OG, Proposed Well Class:TI
Change of Owner 2016-11-09 Operator changed from 8756, CHESAPEAKE EXPLORATION LLC to 5677, GEOPETRO LLC
APP 2017-08-14 Proposed Formations:, Issued Date:8/14/2017, Expired Date:8/14/2019 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:OG, Proposed Well Class:TI
Record Last Modified 2017-12-12 TEMPORARY INACTIVE CHECKLIST REC'D FROM CO ON 03/22/2016
Construction Permit Expires 2019-08-14 TEMPORARY INACTIVE CHECKLIST REC'D FROM CO ON 03/22/2016

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2014-03-19 8661 12883 320
8661 12883 320
8661 12883 320

For data sources see[3]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 05/16/2012 05/16/2012 8548.00 2,061,360.0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 CI-14 Baker Hughes Corrosion Inhibitor Propargyl alcohol 107-19-7 5.00 0.00008000
Methanol 67-56-1 68.00 0.00113000
SCALETROL 720 Baker Hughes Scale Inhibitor Ethylene glycol 107-21-1 35.00 0.00558000
Diethylene glycol 111-46-6 5.00 0.00080000
Ottawa Sand Proppant Quartz 14808-60-7 100.00 14.03
GBW-15L Baker Hughes Breaker Sodium chloride 7647-14-5 100.00 0.01
ClayCare Baker Hughes Clay Stabilizer Water 7732-18-5 30.00 0.02
Choline chloride 67-48-1 75.00 0.05
ENZYME G-NE Baker Hughes Breaker No Hazardous Components 0.00
FRW-18 Baker Hughes Friction Reducer Distillates, petroleum, hydrotreated light 64742-47-8 30.00 0.02
XLW-32 Baker Hughes Crosslinker Boric acid 10043-35-3 20.00 0.00186000
Methanol 67-56-1 90.00 0.00837000
Fresh Water Carrier/Base Fluid 82.58
ALPHA 1427, BF-9L, CI-14, ClayCare,

ENZYME G-NE, FERROTROL 300L, FRW-18, GBW-15L, GW-3LDF, HCL10.1 - 15, NE-900, SCALETROL 720, XLW-32

Baker Hughes Acid, Anti-Bacterial Agent, Breaker, Clay Stabilizer, Corrosion Inhibitor, Cross Linker, Friction Reducer, Gelling Agent, Iron Control Agent, Non-Emulsifier, pH Adjusting Agent, Scale Inhibitor Proprietary Acid
Proprietary Alcohol
Proprietary Copolymer
Proprietary Enzyme
Proprietary Surfactant
Proprietary Silica
Proprietary Solvent
Proprietary Biocide
Proprietary Polymer
Hemicellulase Enzyme Concentrate 9025-56-3
Calcium chloride 10043-52-4
Proprietary Undisclosed by Supplier
Proprietary Disinfectant
Proprietary Weak Acid
No Non-MSDS Listed Components
Water 7732-18-5
BF-9L Baker Hughes pH Adjusting Agent Potassium hydroxide 1310-58-3 15.00 0.00202000
100 Mesh Sand Proppant Quartz 14808-60-7 100.00 1.99
ALPHA 1427 Baker Hughes Antibacterial Agent Ethanol 64-17-5 5.00 0.00072000
Quaternary ammonium compounds,

benzyl-C12-16-alkyldimethyl, chlorides

68424-85-1 7.00 0.00101000
Water 7732-18-5 60.00 0.00868000
Glutaraldehyde 111-30-8 30.00 0.00434000
Didecyl dimethyl ammonium chloride 7173-51-5 10.00 0.00145000
GW-3LDF Baker Hughes Gelling Agent Petroleum Distillate Blend 60.00 0.06
Polysaccharide Blend 60.00 0.06
100 Mesh Sand, Ottawa Sand Baker Hughes Proppant No Non-MSDS Listed Components
NE-900 Baker Hughes Non-Emulsifier Methanol 67-56-1 30.00 0.00028000
Nonyl phenol ethoxylate 9016-45-9 10.00 0.00009000
FERROTROL 300L Baker Hughes Iron Control Agent Citric acid 77-92-9 50.00 0.00287000
Additional Ingredients Not Listed on MSDS
Hydrochloric Acid 10.1-15 Baker Hughes Acid Hydrochloric acid 7647-01-0 15.00 0.15
Water 7732-18-5 85.00 0.87

For data sources see[4]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
2012-05-17 H2O 5 6211 Bbl 424941 BAKER-HUGHES STAGE 3

40 SHOTS

2012-05-18 H2O 15 6444 Bbl 389704 BAKER-HUGHES STAGE 8

40 SHOTS

2012-05-18 H2O 15 5578 Bbl 411986 BAKER-HUGHES STAGE 7

40 SHOTS

2012-05-18 H2O 15 5952 Bbl 425842 BAKER-HUGHES STAGE 6

40 SHOTS

2012-05-16 H2O 15 6063 Bbl 427780 BAKER-HUGHES STAGE 2

40 SHOTS

2012-05-16 H2O 15 6484 Bbl 427853 BAKER-HUGHES STAGE 1

40 SHOTS

2012-05-17 H2O 15 6204 Bbl 426000 BAKER-HUGHES STAGE 4

40 SHOTS

0 0 0
2012-05-17 H2O 15 5929 Bbl 422452 BAKER-HUGHES STAGE 5

40 SHOTS

For data sources see[5]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2013 CHESAPEAKE EXPLORATION LLC 0 0 0
2014 CHESAPEAKE EXPLORATION LLC 0 0 0
2015 CHESAPEAKE EXPLORATION LLC 0 0 0
2016 GEOPETRO LLC 0.00 0.00 0
2019 GEOPETRO LLC 0 0 0

For data sources see[6] [7]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2013 CHESAPEAKE EXPLORATION LLC Brine 0 0
2014 CHESAPEAKE EXPLORATION LLC Brine 0 0
2015 CHESAPEAKE EXPLORATION LLC Brine 0 0
2016 GEOPETRO LLC Brine 0 0
2016 CHESAPEAKE EXPLORATION LLC Brine 0 0
2019 GEOPETRO LLC Brine 0 0

For data sources see[8] [9]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1765587338 2016-11-17 0:00 PW No Violations
-94489109 2014-12-11 0:00 PL No Violations
0094489109 2014-12-11 Preliminary Restoration No Violations

-established ground cover. The soil stockpile is well stabilized with vegetation. Crops, woodlands and/or underbrush are growing normally outside the area of disturbance. Drainage and erosion controls outside the pad are in place and functioning. A closed-loop, above-ground drilling pit system was used, so there are no earthen pits requiring closure. Preliminary restoration has not passed pending installation of production equipment.

0668404099 2015-03-11 Production Wells No Violations

-established ground cover. The soil stockpile is well stabilized with vegetation. Drainage and erosion controls at the pad are in place and functioning. I emailed Steve Ault of Chesapeake on 4/24/2015 about the identification signs. He replied on 4/27/2015 that they had located the wellhead identification signs and they would be installed within the week. I recommend temporary inactive status be granted.

1520987058 2017-07-13 Production Wells Violations Noted The purpose of my inspection was to conduct a status check on well #1713. Correct signage remained posted at the entrance. The access road remained in good repair. No evidence of accelerated erosion or sedimentation was present along the road. The pad was enclosed by a locked chain-link fence perimeter. The fence remained in good repair with no signs of vandalism. An earthen berm perimeter was present outside of the fencing. I walked the perimeter of the pad and found no evidence of erosion or sedimentation. The pad was composed of crushed gravel that remained in good repair. A jersey barrier perimeter was present around the well head. Correct signage was present on the well head. Annular pressure gauges were identified. The 13.375 annular gauge identified 0 psi. The 9.625 annular gauge identified 0 psi. The 5.5 production casing gauge identified 0 psi. The tubing gauge identified 0 psi. No audible or visual leaks were detected. The second year inactive status permit issued to Chesapeake on 6/3/2016 expired 6/3/2017. At the time of inspection a valid third year temporary inactive status permit has not been issued. At the time of inspection a valid third year temporary inactive status permit has not been issued. The well has no reported production for eight consecutive reporting periods as reported in accordance with section 1509.11. The Owner shall plug the well in accordance with section 1509.12 of the Revised Code, obtain temporary inactive well status in accordance 1509.062, or perform another activity regarding the well that is approved by the chief of the division of oil and gas resources management.
1585055056 2020-3-24 0:00: PW No Violations 1.00
1712718065 2017-02-13 Production Wells No Violations The purpose of my inspection was to confirm that owner identification and emergency contact information had been updated. At the time of my inspection the entrance sign board had been updated to indicate the new owner and emergency contact phone number. The well head identification sign was updated to indicate the new owner and emergency contact phone number. The lease road, security fence and pad all remained in good repair. No leaks were identified at the well head. No violations were observed during this inspection.
1765587338 2016-11-17 Production Wells No Violations The purpose of my inspection was to conduct a status check on well #2-1713. The well is currently in temporary inactive status. Correct well identification remains present at the entrance and well head. Lease access and the well pad facilities remain in good repair. No other equipment is on the pad. The Owner raised and identified the 9.625 intermediate annular casing pressure gauge and the 5.5 production annular casing pressure gauge. The intermediate annular casing gauge indicated 0 psi. The production casing annular gauge indicated 0 psi. Maximum allowable annular surface pressure (MAASP) at the surface per ORC 1501:9-1-08 (N) (2) is 830 psi. The production casing pressure gauge indicated 2000 psi.. I will continue to monitor casing pressures on a regular basis to ensure compliance.
1819041056 2016-06-17 Production Wells No Violations My purpose for inspection was to conduct a second year temporary inactive well status inspection.

There is one well on the pad. The sign board posted at the lease entrance displayed signs with the well name, address, permit number and emergency contact information. The lease road was graveled and in good repair. Erosion and sedimentation controls were in place and ground cover was well established along the road. I walked the entire location and found the well pad constructed with an earthen berm perimeter in good repair, being stabilized with well-established vegetation. Erosion and sedimentation controls are in place and functioning. The well pad was found to be enclosed by a chain link fence with barbed wire at the top. The primary entrance and all but one escape door on the South corner were found locked. The surface of the well pad consists of gravel and is in good repair. Limited ponding was observed on the pad. Soil stockpile is stabilized with well-established vegetation. The Rosebud 8H was constructed with 120 of 20 conductor, 618 of 13 3/8 surface casing, 2741 of 9 5/8 intermediate casing and 12996 of 5 1/2 production casing. Drilling was completed 3/30/2012. The well was stimulated 5/16/2012. The well head was constructed with a Christmas tree valve assembly and found to be protected by a concrete Jersey barriers. Proper signage was displayed. A cellar grate was in place to prevent falls. The cellar contained water with approximately 3 to 4 inches of freeboard. The production casing gauges indicated 0 psi. Two additional gauges were present, one indicating 0 psi and the other 1200 psi. Due to the water level in the cellar, I was unable to determine which gauge corresponded to the associated casing string. No sheen or leaking gas was observed on the water in the cellar. The mousehole was cemented. Gate valves are chained and locked. No other production equipment is on the pad. Prior to leaving, I secured the unlocked ma

1848372038 2016-03-31 Production Wells No Violations I was on location for a status check. My inspection found the access road gate locked and the

access road in good repair. The pad is fenced and all man doors were locked. An identification sign is posted at the access road entrance and well. The #8H is not in production. The well is equipped with a christmas tree valve assembly. The equipment on the pad consists of the following:

Site fenced and man doors locked

668404099 2015-3-11 0:00: PW No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
1520987058 US-OH-114464 2018-06-05 NONE16 Temporary inactive; failure to comply with terms or conditions of the permit, rules, or orders

For data sources see[10]

References