X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-029-21724

Well Details

Well ID: 34-029-21724
Loading map...
Country: United States
State: Ohio
County: Columbiana
Municipality: Madison Township
Operator Name: CHESAPEAKE EXPLORATION LLC
Well Pad ID: US-OH-000441
Farm/Lease Name: KERNICH 3-10-2
License Status: Plugged Back
License Date: 2012-03-15
Spud Date: 2012-05-12
Spud Drilling Contractor: NOMAC DRILLING CORP
Final Drill Date: 2012-05-30
Well Total Depth: 8680.00 ft
Configuration: Vertical
Latitude: 40.720000
Longitude: -80.670000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2012-03-15 Proposed Formations:TRENTON-BLACK RIVER, Issued Date:3/15/2012, Expired Date:3/15/2014 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:ST, Proposed Well Class:STRT
Reached Total Depth 2012-05-30
Completion Report Received 2012-08-16
End of Confidential Data 2013-05-30
Construction Permit Expires 2014-03-15
Record Last Modified 2017-12-13

For data sources see[2]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 07/22/2012 07/22/2012 8424.00 396228.0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 HVG01 (TURQUOISE-1 BULK) FTS International Gelling Agent Ethoxylated propoxylated C12-14 alcohols 68439-51-0 2.00 0.00355000
Distillates, petroleum, hydrotreated light 64742-47-8 55.00 0.09
Quartz 14808-60-7 2.00 0.00355000
Guar gum 9000-30-0 50.00 0.08
APB01 (AMMONIUM PERSUFATE BREAKER),

B10 (HIGH PH BUFFER), BXL02E (BORATE XL- INSTANT XL), CI-150, FE-100L, FRW-200, KCLS-4, LTB-01

FTS International Breaker, Clay Stabilizer, Corrosion Inhibitor, Cross Linker, Friction Reducer, Iron Control Agent, pH Adjusting Agent Water 7732-18-5
Proprietary Breaker (APB01) Additive
Proprietary Breaker Additive (LTB-1)
Proprietary Clay Stabilizer Additive (KCLS-4)
Proprietary Corrosion Inhibitor Additive (CI-150)
Proprietary Friction Reducer Additive

(FRW-200 and FRW-200W)

FE 100L (Iron Chelator) FTS International Iron Control Agent Citric acid 77-92-9 55.00 0.00793000
Fresh Water Carrier/Base Fluid 82.80
EC6110A, EC6629A Nalco Anti-Bacterial Agent, Scale Inhibitor Proprietary Acrylate Polymer
Proprietary Quaternary Ammonium Salt
Water 7732-18-5
Methanol 67-56-1
CI-150 (Corrosion Inhibitor) FTS International Corrosion Inhibitor Isopropanol 67-63-0 60.00 0.00103000
Proprietary Quaternary Ammonium Compound 10.00 0.00017000
Proprietary Aromatic Aldehyde 10.00 0.00017000
Proprietary Organic Amine Resin Salt 30.00 0.00051000
N,N-Dimethylformamide 68-12-2 10.00 0.00017000
100 Mesh Sand Proppant Quartz 14808-60-7 100.00 2.83
APB-01 Ammonium Persulfate Breaker FTS International Breaker Peroxydisulfuric acid, diammonium salt 7727-54-0 100.00 0.00626000
Borate XL Instant XL (BXL02) FTS International Crosslinker Sodium metaborate tetrahydrate 10555-76-7 30.00 0.01
Premium White Proppant Quartz 14808-60-7 100.00 12.90
10.1 - 15 HCL FTS International Acid Hydrochloric acid 7647-01-0 15.00 0.15
Water 7732-18-5 85.00 0.86
B10 (HIGH PH BUFFER) FTS International pH Adjusting Agent Potassium hydroxide 1310-58-3 20.00 0.00152000
Carbonic acid, dipotassium salt 584-08-7 48.00 0.00365000
KCLS4 FTS International Clay Stabilizer No Hazardous Components 0.00
Additional Ingredients Not Listed on MSDS
LT Encapsulated AP Breaker (LTB01) FTS International Breaker Proprietary Cured Acrylic Resin 25.00 0.01
Quartz 14808-60-7 25.00 0.01
Peroxydisulfuric acid, diammonium salt 7727-54-0 100.00 0.05
FRW-200 FTS International Friction Reducer Distillates, petroleum, hydrotreated light 64742-47-8 26.00 0.01
EC6629A Nalco Scale Inhibitor No Hazardous Components 0.00
EC6110A Nalco Antibacterial Agent Ethanol 64-17-5 5.00 0.00105000
Quaternary Ammonium Compounds 10.00 0.00209000
Glutaraldehyde 111-30-8 60.00 0.01

For data sources see[3]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2013 CHESAPEAKE EXPLORATION LLC Brine 0 0
2014 CHESAPEAKE EXPLORATION LLC Brine 0 0
2015 CHESAPEAKE EXPLORATION LLC Brine 0 0
2016 CHESAPEAKE EXPLORATION LLC Brine 0 0
2017 CHESAPEAKE EXPLORATION LLC Brine 0 61
2018 CHESAPEAKE EXPLORATION LLC Brine 0 0
2019 CHESAPEAKE EXPLORATION LLC Brine 0 0

For data sources see[4] [5]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1020994225 2018-11-20 0:00 PW No Violations 0.40
-1151025345 2019-5-29 0:00: TI No Violations 0.70
-170980744 2020-4-28 0:00: TI No Violations 1.00
-1738893598 2015-4-23 0:00: PW No Violations
-893346736 2014-12-11 0:00 PL No Violations
0354573115 2017-07-13 Production Wells No Violations The purpose of my inspection was to conduct a status check on well #1724-01. Correct signage remained posted at the entrance. The access road remained in good repair. No evidence of accelerated erosion or sedimentation was present along the road. The pad was enclosed by a locked chain-link fence perimeter. The fence remained in good repair with no signs of vandalism. An earthen berm perimeter was present outside of the fencing. I walked the perimeter of the pad and found no evidence of erosion or sedimentation. The topsoil stockpile remained stable. The pad was composed of crushed gravel that remained in good repair. A jersey barrier perimeter was present around the well head. Correct signage was present on the well head. Annular pressure gauges were identified. The 13.375 annular gauge identified 0 psi. The 9.625 annular gauge identified 0 psi. The 5.5 production casing gauge identified 650 psi. No violations were observed during this inspection.
0444189691 2016-06-17 Production Wells No Violations My purpose for inspection was to conduct a second year temporary inactive well status inspection.

There is one well on the pad. The sign board posted at the lease entrance displayed signs with the well name, address, permit number and emergency contact information. The lease road was graveled and in good repair with a locked gate off Y-Camp Road. Erosion and sedimentation controls were in place and ground cover was well established along the road. I walked the entire location and found the well pad constructed with an earthen berm perimeter in good repair, being stabilized with well-established vegetation. Erosion and sedimentation controls are in place and functioning. The well pad was found to be enclosed by a chain link fence with barbed wire at the top. The primary entrance and escape doors were all found to be locked. A section of fence on the Southeast side was found to be damaged and unable to prevent unauthorized access to the site. The surface of the well pad consists of gravel and is in good repair. Soil stockpile is stabilized with well-established vegetation. The Kernich 1H was constructed with 125 of 20 conductor, 530 of 13 3/8 surface casing, 2706 of 9 5/8 intermediate casing and 14611 of 5 1/2 production casing. Drilling was completed 6/10/2012. The well has not been stimulated. The well head was found to be protected on two sides by concrete Jersey barriers. No other protection was present around the well head. Proper signage was displayed. A cellar grate was in place to prevent falls. The cellar contained water that was near freeboard. The production casing pressure gauge indicated 600 psi. Due to the water level in the cellar, I was unable to determine the pressure indicated on a gauge visible under the water surface. No sheen or leaking gas was observed on the water in the cellar. The mousehole was cemented. Gate valves are chained and locked. No other production equipment is on the pad. I recommend that the pre

0546380516 2016-03-31 Production Wells No Violations I was on location for a status check. My inspection found the access road gate locked and the

access road in good repair. The pad is fenced and all man doors were locked. An identification sign is posted at the access road entrance and well. The #1H is not in production. The well is equipped with a christmas tree valve assembly. The equipment on the pad consists of the following:

Site fenced and man doors locked

0893346736 2014-12-11 Preliminary Restoration No Violations

-established ground cover. The soil stockpile is well stabilized with vegetation. Crops, woodlands and/or underbrush are growing normally outside the area of disturbance. Drainage and erosion controls outside the pad are in place and functioning. A closed-loop, above-ground drilling pit system was used, so there are no earthen pits requiring closure. Preliminary restoration has not passed pending installation of production equipment.

1020994225 2018-11-20 Production Wells No Violations The purpose of my inspection was to conduct a status check on well #2-1724-01. Correct identification was present at the entrance. The road and well pad remained in good repair. The perimeter security fence remained in good repair and locked. The perimeter slopes remained stable with well-established vegetation. Correct identification was present at the well head. Jersey barriers were present to prevent a collision. Grates remained over the cellar to prevent falls. The cellar contained freshwater. No leaks were observed. Gauges to measure annular casing pressure were present and labeled. The 9.625 annulus indicated 0 psi. The 5.5 annulus indicated 0 psi. The 5.5 production casing wing valve gauge indicated 0 psi. The well head was equipped with a night cap and observation port. All valves were closed, chained and locked. No production equipment was on location. No violations were observed during this inspection
1480444071 2016-11-29 Production Wells No Violations The purpose of my inspection was to conduct a status check on well #2-1724. The well is currently in temporary inactive status. Correct well identification remains present at the entrance and well head. Lease access and the well pad facilities remain in good repair. No other equipment is on the pad. The Owner raised and identified the 9.625 intermediate annular casing pressure gauge and the 5.5 production annular casing pressure gauge. The intermediate annular casing gauge indicated 0 psi. The production casing annular gauge indicated 0 psi. The production casing pressure gauge indicated 700 psi. I will continue to monitor casing pressures on a regular basis to ensure compliance.
1564141454 2019-11-25 0:00 TI No Violations 1.00
1738893598 2015-04-23 Production Wells No Violations

-established ground cover. The soil stockpile is well stabilized with vegetation. Drainage and erosion controls at the pad are in place and functioning. I emailed Steve Ault of Chesapeake on 4/24/2015 about the identification signs. He replied on 4/27/2015 that they had located the wellhead identification signs and they would be installed within the week. I recommend temporary inactive status be granted.

354573115 2017-7-13 0:00: PW No Violations 0.60
444189691 2016-6-17 0:00: PW No Violations 3.00
546380516 2016-3-31 0:00: PW No Violations

For data sources see[6]

References