X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-053-20968

Well Details

Well ID: 34-053-20968
Loading map...
Country: United States
State: Ohio
County: Gallia
Municipality: Addison Township
Operator Name: HUFFMAN-BOWERS INC
Well Pad ID:
Farm/Lease Name: ROJ
License Status: Active Injection
License Date: 1993-11-15
Spud Date: 1993-11-16
Spud Drilling Contractor: R WOLFE DRLG
Final Drill Date:
Well Total Depth: 3000.00 ft
Configuration: Vertical
Latitude: 38.910000
Longitude: -82.150000

For data sources see[1]

Well History

Well Status Well Status Date Comment
CO 1993-11-15 40 ORWIG CHAS DBA ORWIG OIL GeoDate 11/15/93
Salt Water Injection Well 1993-11-15 Issued Date 11/15/93 Expired Date 11/15/94 Acres 0000000 Tool Type RTAF Proposed Formation DEVONIAN SHALE Proposed Depth 00000 Proposed Drill Depth 00000
Storage Well 1993-11-15 Issued Date 11/15/93 Expired Date 11/15/94 Acres 0000000 Tool Type RTAF Proposed Formation DEVONIAN SHALE Proposed Depth 00000 Proposed Drill Depth 00000
Original Spud 1993-11-16 DRILLED AS SWIW WELL PERMIT EXPIRED.
Annulus Pressure Monitoring Approved 1993-11-29 DRILLED AS SWIW WELL PERMIT EXPIRED.
First Injection 1994-03-08 DRILLED AS SWIW WELL PERMIT EXPIRED.
Construction Permit Expires 1994-11-15 DRILLED AS SWIW WELL PERMIT EXPIRED.
Change of Owner 2001-08-23 Operator changed from 40, ORWIG ANITA DBA ORWIG OIL to 5677, GEOPETRO LLC
Change of Owner 2003-02-05 Operator changed from 5677, GEOPETRO LLC to 5155, HUFFMAN-BOWERS INC
Last Compliance Report 2014-03-31 DRILLED AS SWIW WELL PERMIT EXPIRED.
Record Last Modified 2017-10-19 DRILLED AS SWIW WELL PERMIT EXPIRED.

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2000-04-28 2682 2882 1
2682 2882 1
2682 2882 1

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
0 0 0

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2011 HUFFMAN-BOWERS INC 0.00 130.00 365
2012 HUFFMAN-BOWERS INC 0.00 0.00 366
2013 HUFFMAN-BOWERS INC 0.00 192.00 365
2014 HUFFMAN-BOWERS INC 0.00 0.00 365
2015 HUFFMAN-BOWERS INC 0.00 0.00 365
2016 HUFFMAN-BOWERS INC 0.00 84.00 365
2017 HUFFMAN-BOWERS INC 0.00 72.00 365
2018 HUFFMAN-BOWERS INC 0.00 0.00 365

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2011 HUFFMAN-BOWERS INC Brine 0 365
2012 HUFFMAN-BOWERS INC Brine 0 366
2013 HUFFMAN-BOWERS INC Brine 0 365
2014 HUFFMAN-BOWERS INC Brine 75 365
2015 HUFFMAN-BOWERS INC Brine 0 365
2016 HUFFMAN-BOWERS INC Brine 0 365
2017 HUFFMAN-BOWERS INC Brine 0 365
2018 HUFFMAN-BOWERS INC Brine 0 365

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1011194390 2011-12-12 0:00 SW No Violations
-1019484951 2007-1-4 0:00:0 SW No Violations
-1020539874 2009-5-13 0:00: SW No Violations
-1033181361 2012-5-7 0:00:0 SW No Violations
-1038954366 2011-10-26 0:00 SW No Violations
-1057354838 2019-8-19 0:00: SW No Violations 2.50
-108870798 2009-10-19 0:00 SW No Violations
-1091782156 2007-4-5 0:00:0 SW No Violations
-1178686372 2012-9-5 0:00:0 AM No Violations
-1259033680 2004-8-14 0:00: SW No Violations
-125942082 2015-1-22 0:00: SW No Violations 2.00
-128601163 2014-7-7 0:00:0 SW No Violations 5.50
-1335056487 2005-5-9 0:00:0 SW No Violations
-1351392930 2005-7-29 0:00: SW No Violations
-1425548785 2014-10-21 0:00 SW No Violations 0.80
-1427969542 2013-2-19 0:00: SW No Violations 2.50
-1493290675 2009-2-23 0:00: SW No Violations
-1619690910 2013-4-4 0:00:0 SW No Violations 2.00
-1703939528 2007-12-17 0:00 SW No Violations
-1813197471 2004-2-4 0:00:0 SW No Violations
-1815481499 2004-4-21 0:00: SW No Violations
-1841695532 2007-2-23 0:00: SW No Violations
-1886253705 2015-8-31 0:00: SW No Violations 2.00
-1905224970 2007-1-4 0:00:0 SO No Violations
-1907508229 2013-9-25 0:00: SW No Violations 4.50
-1914971635 2012-12-4 0:00: SC No Violations
-19733745 2014-3-12 0:00: SW No Violations 2.50
-1976866104 2014-2-25 0:00: SW No Violations 0.60
-1998341007 2003-6-13 0:00: SW No Violations
-203900739 2020-1-17 0:00: SW No Violations 3.00
-307391521 2020-4-6 0:00:0 SW No Violations 1.00
-319354117 2016-4-11 0:00: SW No Violations 3.00
-336937189 2007-5-15 0:00: SW No Violations
-4035722 2012-8-30 0:00: SW No Violations 5.00
-409820311 2013-4-30 0:00: SW No Violations 9.00
-449925227 2008-8-8 0:00:0 SW No Violations
-480255078 2011-10-24 0:00 SW No Violations
-524991852 2016-12-14 0:00 SW No Violations 1.50
-566855275 2013-1-18 0:00: SW No Violations 2.50
-668269244 2006-2-7 0:00:0 SW No Violations
-670185281 2002-10-21 0:00 SW No Violations
-670529513 2017-4-6 0:00:0 SW No Violations 2.00
-702240066 2014-2-18 0:00: SW No Violations 3.50
-709695369 2018-10-15 0:00 SW No Violations 2.80
-760483797 2020-9-3 0:00:0 SW No Violations 3.00
-817667067 2003-2-4 0:00:0 SW No Violations
-870872209 2019-10-25 0:00 SW No Violations 3.10
-880749880 2012-8-30 0:00: SW No Violations 3.00
-895757592 2012-2-14 0:00: SW No Violations
-924870248 2017-11-2 0:00: SW No Violations 2.40
-93579239 2003-12-17 0:00 PW No Violations
-979205279 2017-5-3 0:00:0 SW No Violations 1.50
-983413338 2007-5-31 0:00: SW No Violations
0004035722 2012-08-30 Salt Water Injection Well No Violations Arrived at location with Jon Scott @1040 hrs. Observed poor housekeeping in containment area around location of injection well. Took well and surface annulus pressure readings. Difficult to get pressure gauge on well pressure port because of height of the pipe. Measured 30 psi on well and 50 psi on annulus. Went around tank battery and noted cracks in containment area and recent staining on the side walls of the concrete containment basin. Jimmy, pumper for Huffman-Bowers, indicated that a lower valve on one of the brine product separators broke and contents flowed into the containment area. This explains the recent staining in the basin. Valve was repaired and all oily brine was pumped back into their system. There was some pocked areas on the concrete floor of the basin near the injection well which are to be removed and a new floor installed with more of a gradient from this area to the sump pump in the middle. Also noted brine salt stain in unloading area. Looks like sloppy unloading by the Brine haulers. Jon recommended a better catch surface to allow for any errant release and eventual capture and pump to the initial separator tanks. Took numerous pictures of equipment.
000UIC1584 1995-05-18 Salt Water Injection Well No Violations 1501: 9-3-07 (E) QUARTERLY REPORTS
000UIC1620 1996-01-02 Salt Water Injection Well No Violations 1501: 9-3-07 (E) QUARTERLY REPORTS
0019733745 2014-03-12 Salt Water Injection Well No Violations Barry Bowers is currently working on the 4.5 casing. The prepared clay washed in on top of the bridge plug was tagged at 2375. Barry pulled stretch on the 4.5 casing and compared this data with the bond log and the stretch calculations match the bond log as far as the free casing point. Barry plans to cut the 4.5 casing and replace and cement new casing.
0057497127 2014-02-20 Salt Water Injection Well No Violations Observed Gr-Neutron VDL logging by Appalachian Wells Service of the injection well to determine the quality and extent of cement on the backside of the casing. Apparently the well has a hole in the casing. Bowers wanted to know how much cement coverage exists behind the casing to develop a variance to the placement of the packer to seal the annular space in this well. According to the results there will be extensive perf and squeeze over the casing to improve cement sealing on the backside.
0093579239 2003-12-17 Production Wells No Violations No violations
0108870798 2009-10-19 Salt Water Injection Well No Violations Barry Bowers is having Producers Service Co. do an acid treatment on the well. 1200 gallons of 1540 HCI.
0125942082 2015-01-22 Salt Water Injection Well No Violations No noted violations at surface facility or containment dike. Pressures not tested.
01269i1107 2002-06-06 Salt Water Injection Well No Violations Witness packer being ran in well, will test later today.
01269i1113 2002-06-10 Salt Water Injection Well No Violations Follow-up, In-Compliance, done a M.I.T. test on well, well passed test.
01269i1176 2002-07-09 Salt Water Injection Well No Violations Checked pressure on well, dike still needs cleaned up, brine and oil in dike area, another report has been submitted for these violations. Both sides of well are on vac., will check at later date to see if still on vac. Told Doug Rice about well, may need to test again.
01269i1227 2002-07-18 Salt Water Injection Well No Violations Follow-up on Permit Hold List, company has not cleaned out dike area, oil still on floor and walls of dike. Well appears to have went on vacuum again, will check later in month before requesting an Order to test well. Told pumper of the violation that may be occurring.
01269i1296 2002-08-15 Salt Water Injection Well No Violations Company has not cleaned out dike area as requested.
01269i1373 2002-09-12 Salt Water Injection Well No Violations No violations at this time.
01269i1431 2002-10-08 Salt Water Injection Well No Violations No violations at this time.
0128601163 2014-07-07 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, annulus pressure, and injection pressure. Witnessed a Central Ohio Oil truck unloading on the pad. Collected a brine sample from the truck. Checked the brine hauler log. Witnessed a Hall Drilling Brine truck unloading on the pad. Checked the brine hauler log.
0148772672 2002-10-21 Salt Water Injection Well No Violations An inspection of the well revealed that the well pressure has been the same on the annulus side of well for the past 3 inspections. Need to test annulus side of well.
0170515017 2008-06-13 Salt Water Injection Well No Violations They are using the pump right now. No violations at this time. Dike and surrounding area are clean and look good.
0283707620 2018-06-20 Salt Water Injection Well No Violations Accompanied Eric Conrad, well tenders at unloading pad, appears to be no violations at time of inspection.
0284712446 2012-09-05 Salt Water Injection Well No Violations Inspected salt water injection well. Injection pump was in operation during inspection. Accompanied by Morgan Button MRI 2.
0315401861 2019-04-26 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification is posted. The containment dike is free of fluids.
0319354117 2016-04-11 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Containment dike is free of fluids.
0336937189 2007-05-15 Salt Water Injection Well No Violations Oily barrels are gone. Dike has been cleaned up. The filter housing is in a small plastic tank to catch the oil and keep it out of the dike.
0354871664 2015-04-24 Surface Facility Construction No Violations No noted violations at time of inspection. Review of containment and offloading facility. Hall drilling truck was offloading at the time of inspection and the manifest was reviewed as well.
0372108448 2011-10-24 Salt Water Injection Well No Violations Accompanied J.Scott on SWIW inspection. Pulling tubing, removing packer, pinhole leak found in tubing.
0372190653 2013-07-05 Salt Water Injection Well No Violations Inspected injection pressure, annulus pressure, containment dike, tanks, injection pump, injection line, unloading pad. Dike is free of water. I called and talked to Barry Bowers about the annulus pressure and when he plans to do the monthly pressure test. Barry told me that he is going to be working in the area and will call to schedule the test.
0409820311 2013-04-30 Salt Water Injection Well No Violations Inspected the unloading pad, tanks, containment dike, Injection pressure and annulus pressure. Stayed on site to check brine trucks. No brine trucks came to the site. A brine sample was collected from the injection line between the filter housing and the injection well. The sample was sent to the Lab.
0449925227 2008-08-08 Salt Water Injection Well No Violations New pump is dripping some brine into the dike. This is making shallow puddles 1/2 deep by 3 in diameter. No other problems were observed during the inspection.
0455307995 2011-10-27 Salt Water Injection Well No Violations Set packer, Fill annulus with fresh water and inhibitor 28 bbls, test annulus to 780 psi for 15 minutes. Good test no loss.
0480255078 2011-10-24 Salt Water Injection Well No Violations Pulled tubing and packer out of well. Tubing had a hole in the third joint from bottom. R-4 packer.
0506786704 2007-09-13 Salt Water Injection Well No Violations No problems. Dike has been cleaned out, it looks good.
0515277490 2010-09-14 Salt Water Injection Well No Violations Pump running. I called Barry Bowers Re: identification is faded and needs replaced. I also asked when he plans to test annulus. Barry said they will test it next week.
0524991852 2016-12-14 Salt Water Injection Well No Violations Inspected the containment dike, tanks, injection pump, injection line, injection pressure, annulus pressure and unloading pad. The containment dike is free of fluids. The injection tubing is on vacuum.
0535422303 2015-01-23 Salt Water Injection Well No Violations Reviewed brine hauling logs. Checked brine trucks unloading on the pad. Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure.
0566855275 2013-01-18 Salt Water Injection Well Violations Noted Inspected injection line pressure and annulus pressure. Was unable to completely shut the 1/4 needle valve on the injection tubing. Company gauge was not removed completely due to the valve not shutting completely. Injection pressure was taken with the company gauge. The annulus had a slight vacuum then flowed fluid and had zero pressure. I called Barry Bowers and told him that the 1/4 valve must be replaced and that he needs to do a mini test on the annulus. Barry told me that he will schedule a test for next week. The concrete dike has been repaired and new concrete has been poured in the dike and on the extended unloading pad. The extended unloading pad will now accommodate a tanker. Accompanied by Morgan Button and Jake Glascock MRI 2s.
0634005138 2013-05-17 Salt Water Injection Well No Violations Inspected injection pressure, annulus pressure, Containment dike, tanks, injection pump, and unloading pad. No brine trucks on location during inspection. Dike is free of water.
0668269244 2006-02-07 Salt Water Injection Well No Violations Passed mini pressure test. Actually gained 5 psi during 15 minute test. Tubing on vacuum.
0670185281 2002-10-21 Salt Water Injection Well No Violations FOLLOW UP TO NOV # 1487 An inspection of the well revealed that the well pressure has been the same on the annulus side of well for the past 3 inspections. Need to test annulus side of well.
0670529513 2017-04-06 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Id posted at lease road entrance. The containment dike is free of fluids.
0698005927 2012-08-30 Administrative Inspection No Violations Called Barry Bowers and we discussed the need for expanding his concrete unloading pad. The current pad is not long enough to capture all of the brine residue when the hoses are disconnected on the tanker trucks.
0702240066 2014-02-18 Salt Water Injection Well No Violations Service rig on the well. Pulled tubing and packer out of the well. Plan to do a cement bond log on the 4.5 casing this Thursday 2-20-14.
0709695369 2018-10-15 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification is posted. The containment dike is free of fluids. Witnessed brine trucks unloading on the pad. Reviewed brine hauling logs.
0735412789 2008-03-05 Salt Water Injection Well No Violations Inspected the Frac tank that has been moved on to the location. The Frac tank is being used to temporarily store drilling pit fluids due to the surge in drilling in Jackson and Gallia Counties. This tank allows more storage and is a way to settle out the solids before being pumped into the injection tanks.
0736550501 2013-10-15 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, annulus pressure, and injection pressure. Containment dike is free of water. No trucks were on location during inspection.
0737444357 2018-06-22 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification is posted. The containment dike is free of fluids. Witnessed brine trucks unloading on the pad. Reviewed brine hauling logs. Collected brine samples for analysis.
0817072368 2009-08-18 Salt Water Injection Well No Violations No violations observed during inspection. Pump was operating during inspection.
0817667067 2003-02-04 Salt Water Injection Well No Violations In the spring, dike will need cleaned and cracks sealed.
0880749880 2012-08-30 Salt Water Injection Well No Violations Unloading pad is not large enough to contain spills from tankers. Gravel is stained and has salt buildup. Took photos. I called Barry Bowers and we discussed the unloading pad and the cracks in the concrete dike wall. Barry stated that he is going to repair the dike and pour a larger unloading pad. Accompanied by Morgan Button MRI 2.
0895757592 2012-02-14 Salt Water Injection Well No Violations Inspected injection tubing pressure and annulus pressure. Central ES (Brine # 25-370) tanker was unloading 130 barrels on the pad during the inspection.
0924870248 2017-11-02 Salt Water Injection Well No Violations My inspection today revealed the injection well was in operation. The annulus had 421 psi and the injection tubing had 230 psi. The containment dike was free of fluid.
0979205279 2017-05-03 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection pile, injection pressure and annulus pressure. The containment dike is free of fluids. Accompanied by Inspectors Jimmy Wiles and Matt Fulk.
0983413338 2007-05-31 Salt Water Injection Well No Violations No violations at this time.
1011194390 2011-12-12 Salt Water Injection Well No Violations No violations observed during inspection. Wellhead has been painted recently.
1019484951 2007-01-04 Salt Water Injection Well No Violations Mini test passed. Only dropped 3 psi in 15 min
1020539874 2009-05-13 Salt Water Injection Well No Violations Pump was running during inspection. Filter leak has been fixed. Oil residue still around filter with in dike. Clean up in progress during inspection.
1033181361 2012-05-07 Salt Water Injection Well No Violations Injection pump was not in operation during inspection. Dike is free of water.
1038954366 2011-10-26 Salt Water Injection Well No Violations Run new Halliburton R-4 packer and new tubing to 2620 feet.
1048102421 2003-03-18 Salt Water Injection Well No Violations Injection and annulus pressures were both less than atmospheric pressure.
1072621443 2003-12-17 Salt Water Injection Well No Violations
1089436375 2016-06-13 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Containment dike is free of fluids.
1091782156 2007-04-05 Salt Water Injection Well No Violations Id is missing, There is oil in the dike and four wheel tracks in the dike. Oil could be from vandalism. Well was in good shape.
1147033387 2006-05-01 Salt Water Injection Well No Violations Annulus now holding pressure (60 psi) with tubing at vacuum so did not require mini-pressure test.
1166194747 2006-12-12 Salt Water Injection Well Violations Noted No Annulus Pressure / Extension given after phone conversation on 12-18-06
1178686372 2012-09-05 Administrative Inspection No Violations Received a call from Barry Bowers. Barry stated that he has taken measurements for expanding the unloading pad and has talked to local contractors. Barry stated that he will construct the unloading pad before winter.
1185988493 2007-07-26 Salt Water Injection Well No Violations I witnessed Producers Service Corp. Pump down 1000gallons of HCL to the formation. This cleared out the formation and is allowing more fluid to enter the formation. The well is back to being on a vacuum. No problems were observed during the procedure.
1188347195 2015-10-23 Salt Water Injection Well No Violations No noted vioaltions at facility. No activity at facility.
1188365870 2018-05-18 Brine Hauler No Violations Witnessed brine trucks unloading on the pad. Collected water samples for analysis. Cofar 6724-1/ Cofar 6724-2, Fuego 2H-1/Fuego 2H-2, Dotson-Holland-1/Dotson-Holland-2. Reviewed brine hauling logs.
1205623887 2019-12-13 0:00 SW No Violations 3.50
1216921985 2004-09-03 Production Wells No Violations Remedied.
1223043445 2008-09-10 Salt Water Injection Well No Violations Pump is operating. Dike is clean. Dike has less than 1/4 rain contained in low areas in dike.
1238589277 2009-02-17 Salt Water Injection Well No Violations Pump is running today. No violations were observed.
1247679729 2013-01-23 Salt Water Injection Well No Violations Mini test on annulus. 300 psi for 15 minutes with no loss. Injection pressure was checked. The 1/4 needle valve has been repaired, Debris was preventing the valve from closing completely. Collected a brine sample from the injection line at the wellhead. Sample was sent with Morgan Button MRI 2 to the Jackson office for shipment to the Lab.
1259033680 2004-08-14 Salt Water Injection Well No Violations Annulus does not hold pressure.
1266099854 2018-03-21 Salt Water Injection Well No Violations The salt water injection well had 210 psi on the annulus and 270 psi on the injection tubing. The dike was free of fluids. Legible identification was posted.
1269i10415 2002-05-16 Salt Water Injection Well No Violations Follow-up on Chiefs Order #2002-12 and Material or Substantial Violation Order, Non-Compliance, company has not cleaned up dike area and kept this area free of water and oil, dike is approx. 75ft. x 30ft x 18in., and there is approx. 1ft of water standing in dike at this time. There are 6 - 210 bbl. tanks and 3 - 100 bbl tanks in this dike, volume of this dike is approx. 600 bbls, approx. 200 bbls of fluid is all this dike can hold with the water level at 1ft. approx. 330 bbls is being stored in this dike that does not meet S.P.C.C. requirements. Well has 0 lbs on both sides at this time.
1269i104159190 2002-5-16 0:00: SW No Violations
1269i1107 2002-6-6 0:00:0 SW No Violations
1269i1113 2002-6-10 0:00: SW No Violations
1269i1176 2002-7-9 0:00:0 SW No Violations
1269i1227 2002-7-18 0:00: SW No Violations
1269i1296 2002-8-15 0:00: SW No Violations
1269i1373 2002-9-12 0:00: SW No Violations
1269i1431 2002-10-8 0:00: SW No Violations
1269i55257 2001-12-06 Enhanced Recovery Project No Violations An inspection of the well revealed that there is oil and water in the dike of the tank battery. ID needs rewrote at the well and tanks. Water pump leaking and needs repaired. Oily soil outside the dike needs cleaned up. A M I T test needs done on the well, the annulus needs to be tested at 200 lbs. For 15 minutes, with 5% lose. Well on vac. On injection side of well.
1269i55257964 2001-12-6 0:00: ER No Violations
1269i71555 2002-01-24 Salt Water Injection Well No Violations Follow-up on NOV, Non-Compliance, no action to comply with NOV, all violations still not corrected, and now a M.I.T. test needs done on well.
1269i71555439 2002-1-24 0:00: SW No Violations
1269i82756 2002-02-27 Salt Water Injection Well No Violations Follow-up on Chiefs Order, well appears to be still in operation, will check next week.
1269i82756551 2002-2-27 0:00: SW No Violations
1285857725 2017-03-30 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification is posted on entrance to the facility. The containment dike is free of fluids.
1294835791 2010-12-28 Salt Water Injection Well No Violations Annulus has zero pressure. I talked to Barry Bowers and he told me that they are planning on testing the annulus next Monday.
1294851717 2011-01-03 Salt Water Injection Well No Violations Barry Bowers pressured up the annulus to 190 psi. Injection pump was turned off.
1309081507 2004-09-03 Preliminary Restoration No Violations Passed.
1310500120 2011-07-12 Salt Water Injection Well No Violations No violations
1335056487 2005-05-09 Salt Water Injection Well No Violations Inspected clean-up and painting of tanks; good clean-up except for one end of tank pad where separator appears to be still leaking.
1346865425 2012-09-05 Salt Water Injection Well No Violations Collected brine samples and sent them to ODNR Lab in Cambridge. Accompanied by Morgan Button MRI 2.
1346936480 2012-09-05 Salt Water Injection Well No Violations Arrived at site with Jon Scott. Injection was occurring when we arrived. I checked pressure on Injection well and annular spacing. IP was 260 psi and AP was 140 psi. Jon was preparing to collect brine samples pre-injection. He collected 3-40 ml VOA samples preloaded with HCL preservative, 2 1-liter/1-qt plastic containers in which one of them required loading HNO3 preservative, and 1-liter brown colored jar. Jon used a steel bucket to collect the brine sample from a pour-off valve on the injection well head and small graduated steel pitcher to fill sample bottles. Used a small plastic disposable pipette to finish topping off the VOA bottles to eliminate head space in the bottles. While at the location Jimmy, Bowers oiler, indicated to me that he had placed gravel over the contaminated spot in the containment area around the well head of 34-053-20079, the Roush #1 or Starcher #2 yesterday afternoon (09/04/2012). Nothing else was done at that site yesterday. See 09/04/2012 report on progress.
1351392930 2005-07-29 Salt Water Injection Well No Violations Performed mini-pressure test. Pressured upto 300 psi for 15 minutes. Passed with no pressure loss.
1358541093 2013-01-18 Salt Water Injection Well Violations Noted Met Jon Scott and Jake Glascock to monitor annulus and injection pressures on this injection well. The 1/4-inch valve on injection pressure monitoring port could not be shut off. Needs to be replaced. Could not measure injection pressure. Jon Scott contacted owner about this problem. The owner will correct the problem before next week. Zero pressure was measured on the annulus. A low pressure mechanical integrity test on the annular space is scheduled for sometime next week also.
1359035822 2013-01-23 Salt Water Injection Well No Violations I joined Jon Scott and observed a low pressure mechanical integrity test on the annular space for this injection well. Pressure was mechanically applied, using a hand pump, pumping fluid to increase the pressure in the annular space to 300 psi and then observe this pressure on a 600 psi gauge. Over a 15 minute period the pressure in the annular space remained at 300 psi. Met Barry Bowers, Owner of the well, at the well site. He had already disassembled the injection pressure monitoring port and cleaned it. This apparently was the problem with the port when we were there last week. It may eventually need to be replaced but it shut off today. We measured the injection pressure at 24 psi with the injection pump turned off. Jon Scott also collected a brine sample from this well for analysis. I returned these samples to our office in Jackson to be shipped to our lab in Cambridge, Ohio.
1366048864 2013-04-15 Salt Water Injection Well No Violations Inspected containment dike, tanks, unloading pad, injection pressure and annulus pressure. Dike was free of water. Access road was locked with a cable across it.
1377797221 2013-08-22 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection line, annulus pressure, and injection pressure. Containment dike is free of water.
1390928096 2014-01-21 Administrative Inspection No Violations Received a call from Barry Bowers. He told me that on 1-20-14 he pressured up on the annulus and it would not hold pressure. He turned on the injection pump (300 psi) and monitored the annulus pressure. The annulus pressure did not show communication with the injection tubing. Barry told me that he plans on unseating the packer and pulling the tubing and packer out in stages testing the annulus on the way out.
1392926108 2014-02-20 Salt Water Injection Well No Violations Witnessed Appalachian Well Surveys cement bond log on the 4.5 casing. Wire line total depth 2797.
1393252241 2014-02-24 Salt Water Injection Well No Violations Currently steaming 2 3/8 tubing. Rig crew is preparing to clean out the debris in the bottom of the 4.5 casing.
1393615919 2014-02-28 Salt Water Injection Well No Violations Witnessed Appalachian Well Surveys set a bridge plug in the 4.5 casing at 2408 feet. (Bridge plug is drillable with a steel insert. Filled 4.5 casing with water and pressured the casing to an average of 900 psi. Ran a cement bond log on the 4.5 casing. Log was ran from 2400 feet. Casing appears to be free of cement. Barry Bowers is going to run the tubing and packer in the 4.5 casing to test at different intervals to verify no leaks prior to a perf and squeeze cement job.
1394048986 2014-03-05 Salt Water Injection Well No Violations Currently washed in 100 feet of clay on top of bridge plug to attempt to isolate and test the 4.5 casing. The casing still has a leak. Barry Bowers plans to run tubing and packer in the casing and test different intervals to determine where the leak is located.
1394737390 2014-03-13 Salt Water Injection Well No Violations Ran inside cutter to 2213 feet. Attempted multiple times to cut casing. Tripped tubing and cutter out of well. One of the cutter blades were broken. Shut down operations until 3-14-14.
1394812480 2014-03-14 Salt Water Injection Well No Violations Casing cutter was repaired by Blue Dot. Attached casing cutter to tubing and ran into 2214 feet and cut the casing.
1395163853 2014-03-14 Administrative Inspection No Violations Received call from Barry Bowers that the 4.5 casing was not free at 2214 and that they pulled the inside cutter to 1847 and cut the casing. The casing is free at 1847.
1395172789 2014-03-18 Salt Water Injection Well No Violations Mixed 14 sacks gel and circulated water and gel to surface. Pulled 1847 feet of 4.5 inch casing out of the well. Installed a shop made overshot with a 4.5 collar welded to the top. Installed a pup joint with holes cut in it then a latch down shoe on the 1st joint of 4.5 casing. Centralizer was installed at the collar between the 1st and 2nd joints.
1395250805 2014-03-19 Salt Water Injection Well No Violations 4.5 inch casing cement job. Circulated water and gel to surface prior to pumping cement. Fresh water PH 6. Pumped 120 sacks class A cement. Displaced casing with 29 barrels fresh water and set latch down plug. Removed cement head and installed a 4.5 by 2 swedge with a 2 valve. Will test casing prior to drilling out the latch down plug.
1395680295 2014-03-24 Salt Water Injection Well No Violations Tested new 4.5 inch casing prior to drilling out the latch down plug. 1839 feet of 4.5 inch casing. Casing was full of water. Pressured casing to 420 psi for 30 minutes with no loss in pressure.
1395866301 2014-03-26 Salt Water Injection Well No Violations Witnessed a rebuilt Halliburton R-4 packer (all shear pins are installed, 60,000 shear weight) and 1798 of 2.375 tubing being ran in the well. Packer set at 1800. Filled annulus with 19 barrels fresh water and 4 gallons inhibitor. Tested annulus at 820 psi for 15 minutes with no loss in pressure.
1398383101 2015-05-19 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Reviewed brine hauling logs on trucks unloading on the pad. Collected a brine sample from a Halls Drilling truck UIC # 25-361. 100 barrels flow back water from Antero, Maxwell Horizontal Pad. API# 47-017-06100 Doddridge County, WV. Sample was taken to the ODNR lab.
1400168840 2014-05-15 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection line, injection pump, annulus pressure and injection pressure.
1403122996 2014-06-18 Salt Water Injection Well No Violations Inspect unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Containment dike was free of fluids. Identification was posted at the entrance to the facility. Injection pump was in operation during the inspection.
1403801751 2014-06-26 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, annulus pressure and injection pressure. Witnessed brine trucks unloading on the pad and checked brine hauling logs. Two trucks from Central Ohio Oil Inc were on site. The first truck License # PVH4394 did not have the UIC 25 478, Brine and a company phone number on the truck. I talked to the driver and gave him a copy of the brine hauling requirements for the state. The second truck license # PVP5447 had Brine and UIC 25 478 in 3 lettering on the tanker but did not have a company phone number on the truck. I called and talked to Darrel Black (Central Ohio Oil Inc Plant Manager) and we discussed the need for all trucks hauling brine to class 2 injection well sites to be properly labeled. Darrel explained to me that oil field products are hauled to their facility in Columbus and separated, tested and stored in tanks until there is enough for a load to the injection well. They usually use two tankers that are labeled correctly but the dispatcher had the driver use another tanker today. Darrel told me that the trucks will be labeled as soon as they get back to the shop.
1407767737 2014-08-11 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection line, injection pump, annulus pressure and injection pressure. Witnessed 3 Summit Environmental Services (UIC 25-532) trucks unloading on the pad. Reviewed their brine hauling logs. The trucks were labeled with their UIC number, brine and company name and phone number. I witnessed a Central Ohio Oil Inc. truck unload on the pad. The truck was labeled with UIC 25-478, Brine, and company name and phone number. I reviewed the brine log. I collected a Brine sample from the Central Ohio Oil truck.
1408642112 2014-08-21 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, annulus pressure and injection pressure. Witnessed a Central Ohio Oil truck unload on the pad. Reviewed brine hauling records for the day.
1410535376 2014-09-12 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, annulus pressure and injection pressure. Reviewed brine hauling logs on trucks unloading at the facility.
1412953202 2014-10-10 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, annulus pressure and injection pressure. Witnessed a Central Ohio Oil truck (UIC 25-478) truck unloading on the pad. 100 barrels brine from Peoples Natural Gas Limestone Station. Jefferson County Summerville, Pa.
1416250072 2014-11-17 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Annulus pressure was zero. I called and talked to Barry Bowers about the annulus pressure. Barry said that he was aware of the annulus pressure being low due to the need to put antifreeze in the annulus prior to the monthly mini test. Barry said that the mini test is scheduled for this week. I reviewed the brine hauling records on site.
1416586690 2014-11-21 Brine Hauler No Violations Check brine haulers unloading on pad. Review brine hauling logs.
1417449431 2014-12-01 Salt Water Injection Well No Violations Witnessed monthly mini test of the annulus. Tested annulus at 345 psi for 15 minutes with no loss in pressure. Collected a brine sample from a Central Ohio Oil Transport truck UIC # 25-478. Truck License # TPV 4988 and Tanker License# PPV 5447. 4,200 gallons from Noble Energy-SHL-23 Pad Whorton Hill Rd, Dallas WV, 26036, Marshall County. Inspected the unloading pad, containment dike, tanks, injection pump, injection line, annulus pressure and injection pressure. Reviewed brine hauling logs and checked trucks hauling into the well.
1417707359 2014-12-04 Brine Hauler No Violations Witnessed brine hauler unloading on pad. Reviewed brine hauling logs. Inspected unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure.
1418745285 2014-12-16 Salt Water Injection Well No Violations Producers Service Corporation on site for an acid treatment. Pumped 1200 gallons HCL 15 %. Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Injection operations were resumed after completion of the acid job.
1420571341 2015-01-06 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Reviewed brine hauler logs. Talked to Barry Bowers about the requirement that each brine load must be from a oil and gas well operation. The brine hauling logs must document where the brine originated. Documentation must include the well API number. Currently constructing a wood enclosure around the injection pump to help protect the equipment from freezing.
1421092412 2015-01-12 Salt Water Injection Well No Violations Checked brine hauling trucks unloading on the pad. Reviewed brine hauling logs. Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and injection pressure.
1422285921 2015-01-26 Salt Water Injection Well No Violations Inspected unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. There were no brine trucks on site during inspection.
1422387868 2015-01-27 Brine Hauler No Violations Collected a brine sample from Central Ohio Oil truck UIC 25-478. Brine sample to be taken to ODNR Lab. Truck license # PVP5447 and Trailer License # TPV4988. Checked additional trucks from Halls Drilling, Summit, Waters edge and Viking. Reviewed brine hauling logs.
1425548785 2014-10-21 Salt Water Injection Well No Violations Asked to check on well by Supervisor. No noted violations.
1427969542 2013-02-19 Salt Water Injection Well No Violations Inspected unloading pad, containment dike, checked the injection pressure and the annulus pressure. The containment dike is free of fluids.
1429299351 2015-04-17 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification posted. Containment dike free of water. Checked brine hauling logs and witnessed brine trucks unloading on the pad.
1436929526 2010-09-22 Salt Water Injection Well No Violations Barry Bowers pumped up the annulus this morning before I inspected. They also wrote new identification on the silver dog house to the right of the loading pad.
1436981533 2015-07-15 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Reviewed the brine hauling logs and witnessed trucks unloading on the pad.
1443551749 2015-09-29 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Reviewed brine hauling log. Collected a sample from a Huffman Bowers brine truck UIC25-264 unloading on pad. 75 barrels from Bakerwell, Burleson # 987 pit water from plug job. There are five 210 barrel steel tanks and a 300 barrel steel tank in the containment dike. They are currently only using one 210 barrel tank to off load into. The remaining tanks are new and have not been plumbed together. Brine sample to be taken to Lab.
1447848765 2015-11-17 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. There are five 210 barrel tanks that were replaced recently in the containment dike. Only one of the five 210 barrel tanks is connected and in use at this time.
1452711453 2018-08-08 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification is posted. The containment dike is free of fluids. Witnessed brine trucks unloading on the pad, reviewed brine hauling logs.
1455037803 2016-02-08 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Three of the five 210 barrel tanks in the containment dike are connected at the bottom. The remaining two 210 barrel tanks and the 300 barrel tank are not connected at the bottom.
1477597449 2016-10-27 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. The containment dike is free of fluids. The injection pressure is on vacuum.
1485281406 2017-01-19 Salt Water Injection Well No Violations Inspected the containment dike, tanks, injection pump, injection pressure, annulus pressure and unloading pad. The containment dike is free of fluids.
148772672 2002-10-21 0:00 SW No Violations
1493290675 2009-02-23 Salt Water Injection Well No Violations Witnessed Barry Bowers pump up the annulus to 260 psi. Well is currently on Vac.
1524841066 2018-04-23 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification posted. The containment dike is free of fluids. Witnessed brine trucks unloading on the pad. Reviewed brine hauling logs. Checked trucks for proper brine hauling labeling.
1526669312 2018-05-18 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification posted. The containment dike is free of fluids. There were no brine trucks on location.
1547237328 2019-01-09 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification is posted. The containment dike is free of fluids. Reviewed brine hauling logs.
1550247004 2019-02-12 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification is posted. The containment dike is free of fluids. The access road cable was locked.
1553874191 2019-03-29 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification is posted. The containment dike is free of fluids.
1610994318 2003-10-31 Salt Water Injection Well No Violations No violations at the time of inspection.
1615011129 2013-11-26 Salt Water Injection Well No Violations Inspected unloading pad, containment dike, tanks, injection pump, injection line, injection pressure, and annulus pressure. Dike is free of fluids. Annulus pressure was zero. The injection pump was in operation during the inspection. I called Barry Bowers and told him the annulus was on zero. I told Barry to maintain pressure on the annulus. Barry said that he is due to do a monthly test next week.
1619690910 2013-04-04 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, injection pressure and the annulus pressure.
1630658993 2004-09-03 Salt Water Injection Well No Violations 8/31/04 1 p.m. - 310 psi; 8/31/04 8 p.m. - 360 psi; 9/1/04 3:30 p.m. - 275 psi; 9/2/04 1:30 p.m. - 120 psi; 9/3/04 9 a.m. - 75 psi; removed gauge.
1677873397 2010-03-10 Salt Water Injection Well No Violations Well is connected to pump. Pump in use during inspection. Id needs refreshed. I talked to Jay (pumper).
1694074519 2018-11-28 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Identification is posted. The containment dike is free of fluids.
1703939528 2007-12-17 Salt Water Injection Well No Violations Good id. Dike is clean and looks good.
170515017 2008-6-13 0:00: SW No Violations
1713428360 2015-02-23 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pressure, was not able to check annulus pressure due to valve being frozen (15 degrees F during inspection). Reviewed brine hauling logs.
1714598469 2003-11-24 Salt Water Injection Well No Violations No violations
1723920143 2008-03-26 Salt Water Injection Well No Violations No violations were observed. Dike has been cleaned up. New gravel has been spread on the access road.
1752074672 2008-04-16 Salt Water Injection Well No Violations Bowers has added a pump to the injection well. I stopped out to see it. Everything looks good. The pump is being used for fresh water that is coming from the increased drilling in Gallia Co. The well continues to be on vac. Unless they get backed up with pit water then the pump kicks in. The pump is set at 150 psi. The dike was clean.
1783383241 2004-08-30 Salt Water Injection Well No Violations See pictures 376-383 of cracks in cement dike. Could not check vaccum time on annulus because valve had been left open. Passed the 15 minute test at 300 psi. Continued to monitor throughout the day. At 1 p.m. the ann. pressure was 310 psi. At 8 p.m.
1813197471 2004-02-04 Salt Water Injection Well No Violations Pad still coated with oil and frozen water. Needs to be steam cleaned in better weather and checked for cracks. Picture 170
1815481499 2004-04-21 Salt Water Injection Well No Violations Pressures the same; still needs to be cleaned up.
1841695532 2007-02-23 Salt Water Injection Well No Violations No problems at this time.
1875908321 2007-04-25 Salt Water Injection Well No Violations Id is good. Huffman-Bowers is burning the barrels filled with oil debris and old oil filters. I took pictures and a short video of the fire.
1876925103 2016-07-15 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure, and annulus pressure. The containment dike is free of fluids.
1886253705 2015-08-31 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Containment dike is free of fluids. Five 210 barrel tanks have been replaced in the containment dike. The injection tubing master valve is closed. The injection pump is not connected to the new tanks. Access road cable was locked.
1905224970 2007-01-04 Storage Well No Violations No problems at this time.
1907508229 2013-09-25 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection line, annulus pressure, and injection pressure. Injection pump was in operation during the inspection. Containment dike is free of water. Witnessed a Huffman Bowers brine truck unload produced water from the Thompson lease.
1914971635 2012-12-04 Surface Facility Construction No Violations Replaced concrete in dike where the pump was located. Finishing concrete during inspection. Unloading pad has two areas that have been formed up to extend the pad. Unable to check pressures on the well due to the new concrete work.
1967842628 2001-12-06 Enhanced Recovery Project Violations Noted FOLLOW UP TO NOV # 1269i552 An inspection of the well revealed that there is oil and water in the dike of the tank battery. ID needs rewrote at the well and tanks. Water pump leaking and needs repaired. Oily soil outside the dike needs cleaned up. A M I T test needs done on the we
1976866104 2014-02-25 Salt Water Injection Well No Violations Bowers crew tried to use a sand pump to clean out 100-feet of sediment that accumulated during the operation of this injection well. The sediment was discovered when the they ran GR-Neutron/VDL log over the well. They are going to drill the sediment and pump it to surface and into the containment area for the injection well near the sump. All fluid will be pumped back into the storage tanks to eventually be reinjected into the well.
1998341007 2003-06-13 Salt Water Injection Well No Violations Continual progress. Dike needs cleaned.
2031491777 2003-08-21 Salt Water Injection Well No Violations No violations at the time of inspection.
2123151799 2011-03-25 Salt Water Injection Well No Violations No violations at this time.
283707620 2018-6-20 0:00: SW No Violations 0.50
284712446 2012-9-5 0:00:0 SW No Violations
315401861 2019-4-26 0:00: SW No Violations 3.00
354871664 2015-4-24 0:00: SC No Violations 1.50
372108448 2011-10-24 0:00 SW No Violations 3.30
372190653 2013-7-5 0:00:0 SW No Violations 2.50
455307995 2011-10-27 0:00 SW No Violations
506786704 2007-9-13 0:00: SW No Violations
515277490 2010-9-14 0:00: SW No Violations 1.00
535422303 2015-1-23 0:00: SW No Violations 2.00
57497127 2014-2-20 0:00: SW No Violations 3.50
634005138 2013-5-17 0:00: SW No Violations 5.00
698005927 2012-8-30 0:00: AM No Violations
735412789 2008-3-5 0:00:0 SW No Violations
736550501 2013-10-15 0:00 SW No Violations 2.00
737444357 2018-6-22 0:00: SW No Violations 6.80
817072368 2009-8-18 0:00: SW No Violations
iTOMK00011 2001-02-21 Salt Water Injection Well No Violations
iTOMK000118 2001-2-21 0:00: SW No Violations
UIC1584 1995-5-18 0:00: SW No Violations
UIC1620 1996-1-2 0:00:0 SW No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
0566855275 US-OH-126365 2013-01-23 Violation of injection tubing/fitting requirements
0566855275 US-OH-126366 2013-01-23 Failure to monitor annulus pressure
1166194747 US-OH-104416 2006-12-15 Failure to monitor annulus pressure
1358541093 US-OH-110401 2013-01-30 Violation of injection tubing/fitting requirements
1358541093 US-OH-110402 2013-01-30 Failure to monitor annulus pressure
1967842628 US-OH-119880 2001-12-06 Failure to legibly identify well
1967842628 US-OH-119881 2001-12-06 Equipment pressure rated below operating pressure
1967842628 US-OH-119882 2001-12-06 No SPCC dike/or failure to keep dike free of water or oil
1967842628 US-OH-119883 2001-12-06 Pollution/Contamination

For data sources see[9]

References