X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-055-20773

Well Details

Well ID: 34-055-20773
Loading map...
Country: United States
State: Ohio
County: Geauga
Municipality: Montville Township
Operator Name: STMX GAS INC DBA AUTUMN RIDGE
Well Pad ID:
Farm/Lease Name: MCKEON F
License Status: Active Injection
License Date: 1985-05-20
Spud Date: 1984-06-10
Spud Drilling Contractor: SHERMAN DRLG
Final Drill Date: 1984-06-16
Well Total Depth: 3882.00 ft
Configuration: Horizontal
Latitude: 41.600000
Longitude: -81.020000

For data sources see[1]

Well History

Well Status Well Status Date Comment
CO 1984-03-06 213 LOMAK OPERATING CO GeoDate 3/6/84
Oil and Gas 1984-03-06 Issued Date 3/6/84 Expired Date 9/2/84 Acres 0020000 Tool Type RTAF Proposed Formation CLINTON Proposed Depth 00000 Proposed Drill Depth 00000
CO 1984-03-26 213 LOMAK OPERATING CO GeoDate 3/26/84
Oil and Gas 1984-03-26 Issued Date 3/6/84 Expired Date 9/2/84 Acres 0020000 Tool Type RTA Proposed Formation CLINTON Proposed Depth 03882 Proposed Drill Depth 03882
Reached Total Depth 1984-06-16 CONVERTED FROM OIL AND GAS TO SWIW RL 3-31-84
CO 1985-05-20 2111 BUFFALO OILFIELD SER INC GeoDate 5/20/85
Conversion to Injector 1985-05-20
Salt Water Injection Well 1985-05-20 Issued Date 5/20/85 Expired Date 5/20/86 Acres 0020000 Tool Type RTA Proposed Formation NEWBURG Proposed Depth 03882 Proposed Drill Depth 03882
Storage Well 1985-05-20 Issued Date 5/20/85 Expired Date 5/20/86 Acres 0020000 Tool Type RTA Proposed Formation NEWBURG Proposed Depth 03882 Proposed Drill Depth 03882
Completed 1985-08-13 CONVERTED FROM OIL AND GAS TO SWIW RL 3-31-84
Original Spud 1985-08-13 CONVERTED FROM OIL AND GAS TO SWIW RL 3-31-84
Plugged Back 1985-08-13 CONVERTED FROM OIL AND GAS TO SWIW RL 3-31-84
Completion Report Received 1985-10-02 CONVERTED FROM OIL AND GAS TO SWIW RL 3-31-84
First Injection 1985-10-20 CONVERTED FROM OIL AND GAS TO SWIW RL 3-31-84
Construction Permit Expires 1986-05-20 CONVERTED FROM OIL AND GAS TO SWIW RL 3-31-84
Annulus Pressure Monitoring Approved 1996-12-23 CONVERTED FROM OIL AND GAS TO SWIW RL 3-31-84
Change of Owner 1997-09-11 Operator changed from 2111, BUFFALO OILFIELD SER INC to 2511, WITLICKI RICHARD 9-11-97 - the actual change occured in feb of 1995 but was rejected in that Mr. Witlicki had not updated his form 3 which he subsequently filed but never refiled the form 3. UIC section reflected that Mr. Witlicki has been filing the appropriate UI forms for this well.
Change of Owner 2010-07-28 Operator changed from 2511, WITLICKI RICHARD to 8445, P T SERVICES LLC
Last Compliance Report 2011-11-18 CONVERTED FROM OIL AND GAS TO SWIW RL 3-31-84
Change of Owner 2011-12-16 Operator changed from 8445, P T SERVICES LLC to 1966, PETROX, INC
Change of Owner 2018-08-17 Operator changed from 1966, PETROX, INC to 10108, STMX GAS INC DBA AUTUMN RIDGE ENTERPRISES
Record Last Modified 2018-08-17 CONVERTED FROM OIL AND GAS TO SWIW RL 3-31-84

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2000-04-28 3358 3489 1
3358 3489 1
3358 3489 1

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
ACID 0 2000 Gal 0
H2O 0 70000 Gal 0

For data sources see[4]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1073538114 2018-2-14 0:00: SW No Violations 0.50
-1078643233 2014-12-26 0:00 SW No Violations
-1084737270 2009-7-14 0:00: SW No Violations
-1198281731 2012-6-29 0:00: SW No Violations
-1276022014 2004-9-15 0:00: SW No Violations
-1430839412 2017-6-27 0:00: SW No Violations
-1511995788 2012-7-11 0:00: SW No Violations
-1523390899 2019-2-11 0:00: SW No Violations 1.00
-1544671900 2004-11-16 0:00 SW No Violations
-1702543963 2019-4-23 0:00: SW No Violations 0.70
-1715919476 2016-3-30 0:00: SW No Violations
-1745755834 2006-10-10 0:00 SW No Violations
-1831207852 2006-7-12 0:00: SW No Violations
-183820628 2012-10-26 0:00 SW No Violations
-1856538865 2014-5-16 0:00: SW No Violations
-1919037749 2014-9-23 0:00: SW No Violations
-192104103 2020-1-15 0:00: SW No Violations
-2027093902 2019-8-8 0:00:0 SW No Violations 0.60
-2106136306 2012-7-11 0:00: SW No Violations
-403556584 2004-5-3 0:00:0 SW No Violations
-44545181 2009-2-3 0:00:0 SW No Violations
-509763392 2015-3-30 0:00: SW No Violations
-738004149 2008-1-30 0:00: SW No Violations
-789101302 2013-6-28 0:00: SW No Violations
-846923724 2005-10-4 0:00: SW No Violations
-965549215 2016-12-30 0:00 SW No Violations
0000UIC491 1988-01-25 Salt Water Injection Well No Violations 1501:9-1-07
0000UIC492 1988-01-25 Salt Water Injection Well No Violations 1501:9-3-06
0000UIC493 1988-01-25 Salt Water Injection Well No Violations 1501:9-3-04
0000UIC494 1988-01-25 Salt Water Injection Well No Violations 1509.22 (C)(3)
0000UIC942 1990-07-09 Salt Water Injection Well No Violations 1509.22 (A) (1) (2) STORAGE & DISPOSAL
0000UIC943 1990-07-09 Salt Water Injection Well No Violations 1501.9-3-05 (A) (6) CONSTRUCTION & CONVE
0000UIC944 1990-07-09 Salt Water Injection Well No Violations 1501. 9-03-04 (A) PREVENT OF CONTAMINA
000UIC1409 1993-05-11 Salt Water Injection Well No Violations 1509.22 (A) (2) STORAGE
000UIC1410 1993-05-11 Salt Water Injection Well No Violations 1509.03 RULES
000UIC1411 1993-05-11 Salt Water Injection Well No Violations 1501: 9-3-05 (A)(6) CONSTRUCTION
001250i226 2002-05-15 Salt Water Injection Well No Violations Check U.I.C. facility.
001250i252 2002-09-04 Salt Water Injection Well No Violations Check U.I.C. facility.
0044545181 2009-02-03 Salt Water Injection Well No Violations No violation In compliance
0089458342 2018-05-17 Salt Water Injection Well No Violations I found the injection well not operating on the day of my inspection. There is no evidence of recent activity. The fences around the facility and well are locked. Identification signs are posted. The access road gate is locked.
0183820628 2012-10-26 Salt Water Injection Well No Violations My inspection of the injection facility and well found no violations.
0184381459 2012-07-11 Salt Water Injection Well No Violations FOLLOW UP TO NOV # -2106136306 FOLLOW UP TO NOV # 1342104637 My inspection of the well site was accompanied by another inspector, Tom Hill.

Brine was dripping from a union at the well head.

Brine was pooling on the unloading pad.

The well tender was instructed to fix the leak and clean off the unloading pad.

0349466828 2003-10-07 Salt Water Injection Well No Violations no violation
0372455924 2011-11-14 Salt Water Injection Well No Violations At the time of inspection operator had completed tripping out tubing and had circulated on well. Operator felt that the well had sanded in. They only had 17 feet of open perfs. They were not able to circulate out any sand. Impression block may be ran on Wednesday.
0403556584 2004-05-03 Salt Water Injection Well No Violations well back in field annulus psi 450/tubing psi not receving brine at time of inspection.
0509763392 2015-03-30 Salt Water Injection Well No Violations My inspection found the annulus valve was open. The 4.5 casing pressure was 760 psi. The tubing pressure was at 250 psi. The well was not being operated at the time of inspection. No changes since my last inspection. No violations to report.
0513467342 2002-12-06 Salt Water Injection Well No Violations Check U.I.C. facility.
0609934605 2015-09-24 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There was several inches of water inside the dike area. JR Beals was instructed to pump the water into a tank.
0692401379 2015-05-11 Salt Water Injection Well No Violations The well and surface facility were inspected. There were no violations found at the time of inspection.
0718050614 2005-05-17 Salt Water Injection Well No Violations pressures in compliance.
0727979154 2007-02-20 Salt Water Injection Well No Violations not active
0738004149 2008-01-30 Salt Water Injection Well No Violations well in complance.
0789101302 2013-06-28 Salt Water Injection Well No Violations My inspection found the annulus valve was open. The casing pressure to be 725 psi. The tubing pressure was at 0 psi. The well was not being operated at the time of inspection. Nothing else had changed since my last inspection. No violations to report.
0840145097 2008-07-15 Salt Water Injection Well No Violations no violation
0846923724 2005-10-04 Salt Water Injection Well No Violations no violation
0964959594 2017-09-21 Salt Water Injection Well No Violations I was on location to inspect the injection well. I was unable to gauge the annulus due to corroded threads on the needle valve. An identification sign is posted. There are no visible leaks in the diked tank battery. I spoke with Jim Stanley from Petrox. Mr. Stanley stated the needle valve will be replaced immediately.
0965549215 2016-12-30 Salt Water Injection Well No Violations The injection well and surface facility were inspected. The annular pressure was not gauged, because the casing was frozen. There were no violations at the time.
1050582730 2005-02-15 Salt Water Injection Well No Violations Pressure in compliance.
1073538114 2018-02-14 Salt Water Injection Well No Violations

-up inspection will be conducted once repairs are completed.

1078643233 2014-12-26 Salt Water Injection Well No Violations The valve on the tubing/casing annulus was frozen. No violations were found at the time.
1084737270 2009-07-14 Salt Water Injection Well No Violations Checked tank battery and well pressures.
1090249002 2004-07-19 Salt Water Injection Well No Violations on site to status check site . Checked well head unable to get to gaeuga to turn on gate locked .checked inside tank battery combo 2843.No violation found at time of inspection.
1123000203 2005-07-26 Salt Water Injection Well No Violations
1138497647 2017-03-31 Salt Water Injection Well No Violations An inspection of the injection well and surface facility found no violations.
1179886596 2013-08-29 Salt Water Injection Well No Violations My inspection of the well and injection facility found no violations.
1198281731 2012-06-29 Salt Water Injection Well No Violations My inspection today found: The well shut down above its allowable limits and no one on site. The area around the well, disturbed during well work over, has been graded. Seeding needs to take place. Operator will be contacted in regards to the well being 10psi over its allowable limit.
1242700925 2012-03-28 Salt Water Injection Well No Violations My inspection of this well site found the well in operation and the pressure on the annulus was 0 PSI. The injection pressure was recorded using a Division of Oil and Gas gauge. Pressure fluctuated between 700 and 860 PSI. The gauge needle was bouncing to the point an accurate reading could not be obtained. When I shut the valve, the pressure on the gauge was at 860 PSI. There was standing water around the well head which I tested for Chlorides and registered 97 PPM. The Chlorides are residual from a well workover conducted over the winter. There was standing water behind the south end of the tank battery covering a brine scald. I tested this water for Chlorides and it tested at 6808 PPM. It appears the well tender was siphoning the dike free of both standing water and released brine. I contacted JR, who tends the well, and I informed him that the well is at its maximum pressure, to shut down and check pressure. The brine scald area outside of the tank battery needs removed and the area reclaimed. He stated that he was on his way and that the switch on the pump may need changed. I notified him that these missues must be addressed immediately.
1250i226 2002-5-15 0:00: SW No Violations 0.70
1250i252 2002-9-4 0:00:0 SW No Violations 0.50
1270734432 2010-04-07 Salt Water Injection Well No Violations well in complance pressure(700)
1276022014 2004-09-15 Salt Water Injection Well No Violations
1281635773 2010-07-22 Salt Water Injection Well No Violations Well tender on site working on maintained of the well. Well man door was locked at the time of inspection. Operator will be getting me a key. Well site was in good repair.
1292960404 2010-12-21 Salt Water Injection Well No Violations Well was in operation. Lease road was open up to the storage area. Well location had 1.5 of snow on it. Injection pressure 40 PSI, 4.5 casing annulus pressure was 530 PSI. Man door to the well was locked. Identification signs were posted.
1300471222 2011-03-18 Salt Water Injection Well No Violations Injection pressure of 20 PSI. Annulus pressure of 220 PSI. Samples of the standing water in the dike were collected and tested: Chlorides = > 631 PPM and pH = 8.4 on a low range Quantab. JR, operator of the well, has been pumping standing water into the storage tanks. Replacement tank is on location, out side of the tank battery. Operator is continuing to improve facilities.
1309199044 2011-06-27 Salt Water Injection Well No Violations Well is operating. Operator has two of the 210BBLs in the battery cut and cleaned.. Two 210 BBl tank shave been painted. Two new tank on site. Spoke to JR, they will be working over the battery after the holiday. New stone for the floor of the battery and new tanks. New identification signs posted at the entrance of the site, at the battery and on the wellhead. Unable to take injection pressure, lock was frozen. Contacted JR, he will replace lock. Operator mowed lease road and area around well. Dike is in good repair, operator will be brining a load of soil in to cover exposed sections of the liner.
1312982879 2011-08-09 Salt Water Injection Well No Violations Annular pressure was 700 PSI and injection pressure was 570 PSI. Operator has reconfigured tank battery. Loading pad was clear of water and debris. Dike was in good repair. Stone in the battery is stained with rust. Operator has a sump, with a pump, in the south east corner of the dike Discharge for the pump is plumbed into a storage tank. Valves had threaded plugs in them.
1317312524 2011-09-29 Salt Water Injection Well No Violations Met JR on location. Tank battery has standing water in it from the recent heavy rains. Tested chlorides of the water inside the dike area. Clorine = 336 PPM. Operator can discharge water. Tank battery is in good repair. Identification sign is posted. Off loading pad has been steam cleaned. Sump is clear and able to function. Injection well was not operating this day. Lease road is stable. Operator has installed a lease road gate. Load lines were locked. Man door to the tank battery has a lock installed on it.
1320784573 2011-11-08 Salt Water Injection Well No Violations Well is not operating. The operator has a load of tubing on location as well as equipment for well servicing. Free water in the tank battery was contained by the sump. Vegetation around the perimeter of the battery needs mowed.
1320950370 2011-11-10 Salt Water Injection Well No Violations Service rig is on location and the tubing has been pulled from well. New tubing is on site. Dropped off completion report information for the operator in their mailbox.
1321452143 2011-11-15 Salt Water Injection Well No Violations Operator has tripped the reconditioned Baker Lockset packer into the hole. The operator circulated the inhibitor bottoms up and the packer was set at 3304. Tubing (2.375, R-3 4.75 lb) was set at 3300. The operator pressured up the annulus to 780 PSI and tested pressure at 5 minute and 15 minutes with no drop in pressure. Passed the Mechanical Integrity Test (MIT). The work pit was lined and the pit fluids were pumped into a water truck after work was completed. On the previous service day it was believed that the lower section of perforated zone sanded in. The operator had circulated on the well to clean sand from perforations on 11/14/11. On that date they had 17 of open perforations. The operator had planned to attempt to clean additional sand out of the hole but felt they had enough perforations open to operate the well.
1325090983 2011-12-27 Salt Water Injection Well No Violations Annulus pressure was zero. The tubing pressure, when tested, was zero. There was a small amount of flow when testing for vacuum. There was a bull plug on the left hand side of shut off valve on annulus which was not tight. The shut off was threaded tight on the annulus. The fence around the wellhead, which was taken down when operator serviced the well, has not been repaired.
1326304727 2018-07-26 Salt Water Injection Well No Violations I found no evidence of recent activity. The diked tank battery has several inches of water and overgrown vegetation. There is a locked chain link fence around the facility and well. Identification signs are posted at the well and tank battery. The access road gate was closed and locked.
1335356617 2012-04-23 Salt Water Injection Well No Violations My inspection today found no violations. The annulus pressure on the well was 300 PSI. The injection pressure was 500 PSI. The well was not operating at the time of my inspection. The area around the wellhead, which had been disturbed by working over the well during the winter, has been graded. This area is barren at this time and it may need to be limed, fertilized and seeded if vegetation does not reestablish itself. The brine scald, found south of the tank battery dike during previous inspections, has been bio-remediated and vegetation has started to reestablish itself. The lease road gate was locked at the time of inspection.
1342104637 2012-07-11 Salt Water Injection Well Violations Noted My inspection of the well site and injection facility was accompanied by another inspector, Tom Hill.

Brine was dripping from a union at the well head.

Brine was pooling on the unloading pad.

The well tender was instructed to fix the leak and cl

1364750994 2013-03-29 Salt Water Injection Well No Violations My inspection found the well was not being operated at the time I was on location. Tubing pressure was at 0 psi and the 4.5 was at 575 psi. The pressures were recorded using a Division of Oil and Gas guage. The tank battery was surrounded by a proper dike and a chain link fence. The tank battery consisted of six 210 BBL tanks and three 300 BBL frac tanks. The building that houses the pumping equipment was inside the dike as well. The proper identification was located on the tank battery. The lease road was in stable condition. No violations found at time of inspection.
1380025732 2013-09-24 Salt Water Injection Well No Violations My inspection found the annulus valve was open. The casing pressure to be 760 psi. The tubing pressure was at 0 psi. The well was not being operated at the time of inspection. Nothing else had changed since my last inspection. No violations to report.
1387297860 2013-12-17 Salt Water Injection Well No Violations My inspection found the annulus valve was open. The 4.5 casing pressure was 760 psi. The tubing pressure was at 0 psi. The well was not being operated at the time of inspection. Nothing else had changed since my last inspection. No violations to report.
1394114976 2014-03-06 Salt Water Injection Well No Violations My inspection found the annulus valve was open. The 4.5 casing pressure was 760 psi. The tubing pressure was at 0 psi. The well was not being operated at the time of inspection. Nothing else had changed since my last inspection. No violations to report.
1430839412 2017-06-27 Salt Water Injection Well No Violations During this inspection of the injection well and surface facility, no violations were observed.
1451573408 2015-12-31 Salt Water Injection Well No Violations My inspection found the company was not operating the well at the time of inspection. The annulus valve was closed. The 4.5 casing pressure was 720 psi. The tubing pressure was at 0 psi and was on vacuum. No changes since my last inspection. No violations to report.
1467733211 2016-06-29 Salt Water Injection Well No Violations My inspection found the company was not operating the well at the time of inspection. The annulus valve was closed. The 4.5 casing pressure was 350 psi. The tubing pressure was at 0 psi and was on vacuum. The valve on the 4.5 casing was replaced as per Inspector Ochs request. No changes since my last inspection. No violations to report.
1480667397 2012-07-17 Salt Water Injection Well No Violations I inspected the site to check the status of the annulus pressure. Inspection on 06/29/12 found the annulus pressure to be zero. Inspection on 07/11/12 found the annulus pressure to be 750psi. On this day the annulus pressure was 720psi. I call J.R. the well tender and left a message requesting that he releive the pressure on the annulus to 250psi. If annulus pressure increase, further assesment of the well will be needed. I also asked him to call me and let me know if he charged the annulus, this would explain the increase in pressure. The loading pad was free of water and brine. The lease road gate was locked. Bull plug has been placed in the 1/4 inch valve.
1506009796 2017-09-21 Salt Water Injection Well No Violations I was on location to inspect the injection well. There are locked chain link fences around the UIC facility and injection well. The annular pressure was not gauged due to corroded threads on the needle valve. The access road is stable with a locked gate near the entrance and identification sign. I spoke with Scott Dutton from Petrox. I instructed Mr. Dutton to replace the needle valve on the annular casing.
1509984912 2017-11-06 Salt Water Injection Well No Violations
1511995788 2012-07-11 Salt Water Injection Well No Violations My inspection today found: The salt water injection well within its allowable limits. A hammer union, before the well head, was dripping brine. The annulus has two valves on it. The first valve is a 2 inch ball valve and the second valve is a 1/4 inch ball valve. The 1/4 inch ball valve leaks. An absorbent pad was placed under the valve after testing. There is a barren area south of the well, the area is approximately 50 feet by 100 feet. The barren area is from the well being worked over when the soil was soft. Brine scalding is evident in the barren area and there is iron and salt staining. There is wildlife tracks and areas where they have scrapped the ground on the barren area. The loading pad and sump had standing water in it. The water in the loading pad tested over 4000ppm chlorides. I contact J.R., the well tender, and advised him to lime, fertilize and seed the barren area. The 1/4 inch valve needs a plug, a needle gauge installed on it or replaced. Loading pad needs water removed from it. Per J.R., he was planning on bringing brine truck over this day to unload the pad. The land owner walked over and meet with me after the inspection. He asked about seeding and repairing the area around the wellhead. I informed him that its being addressed. The land owner asked about constructing a pond behind the tank battery. I informed him that he should speak to the company and Call Before You Dig.
1513954634 2017-12-22 Salt Water Injection Well No Violations I was on location to inspection the UIC facility. I found the diked UIC facility has several inches of standing water. The chain link fences around the facility and well are locked. There are identification signs posted. There are no violations at this time.
1544671900 2004-11-16 Salt Water Injection Well No Violations On site checked well status
1594318697 2020-5-27 0:00: SW No Violations 1.00
1600281566 2020-9-16 0:00: SW No Violations 1.00
1622686319 2006-05-10 Salt Water Injection Well No Violations on site to check well pressure.
1667299505 2018-02-27 Salt Water Injection Well No Violations
1701629374 2008-05-29 Salt Water Injection Well No Violations no violatio of UIC.
1715919476 2016-03-30 Salt Water Injection Well Violations Noted The injection well and surface facility were inspected. The two inch valve on the casing was split from freezing. There was nothing leaking from the valve at the time. The well owners field supervisor was instructed to replace the valve.
1745755834 2006-10-10 Salt Water Injection Well No Violations well in compliance
1831207852 2006-07-12 Salt Water Injection Well No Violations no violation at time of inspection
1837710589 2018-09-06 Salt Water Injection Well No Violations I found evidence of recent activity. New aluminum siding has been installed on the sides and roof of the pump house. Siding and a ladder are lying on the ground inside and outside of the fenced tank battery. There are several inches of water in the diked tank battery and off-loading pad. The fence around the facility and well are locked. The injection well was not in operation during my inspection. The access road gate was closed and locked.
184381459 2012-7-11 0:00: SW No Violations
1856538865 2014-05-16 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations.
1884172925 2007-09-10 Salt Water Injection Well No Violations no violation.
1919037749 2014-09-23 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations. A new gauge and valve were installed on the tubing. The well was fenced-in and the gate was locked.
2046614152 2019-12-12 0:00 SW No Violations 1.00
2059367429 2011-10-18 Salt Water Injection Well Violations Noted Annulus and injection pressures were over the limit of the 1000 PSI ODNR issue gauge. The needle gauge that the operator had on site read over 1100 PSI. Spoke to JR, the well tender who was on site. He stated that 150 barrels of fresh water had been put down the hole and that caused the over pressure of the injection. 1. Injection well is to be shut down and pressure relieved. 2. Once annulus has equalized with the tubing an MIT test must be completed and passed before injection well can go back into production. Spoke to JR on 10/20/11. He stated that the operator is going to get a service rig on site, pull tubing, replace tubing and inspect packer. Inspector will need to witness activities.
2106136306 2012-07-11 Salt Water Injection Well No Violations FOLLOW UP TO NOV # 1342104637 My inspection of the well site was accompanied by another inspector, Tom Hill.

Brine was dripping from a union at the well head.

Brine was pooling on the unloading pad.

The well tender was instructed to fix the leak and clean off the unloading pad.

2122927342 2018-11-07 Salt Water Injection Well No Violations I found the injection well not in operation on the day of my inspection. The fencing around the well is locked and the gate valve on the injection tubing is open. New siding has been installed on the pump house. Most of the water in the diked tank battery has been removed. There is some overgrown vegetation in the diked tank battery. There are no identification signs; however, there are STMX Gas Inc. dba: Autumn Ridge Enterprises stickers posted. The fencing around the diked tank battery and pump house has no lock. The RBDMS database shows the injection well was transferred from Petrox to STMX Gas Inc. on 8/17/2018. I spoke with Brent Vanscoik from STMX Gas Inc. Mr. Vanscoik stated they have rebuilt the pump house, pump, and motor; plus delivered approximately 10 loads of brine water to the facility.

I instructed Mr. Vanscoik to: Immediately posted new identification signs at the facility and injection well. Cut down the overgrown vegetation inside of the dike.

A follow-up inspection will be conducted by 11/20/2018.

2137333294 2012-08-22 Salt Water Injection Well No Violations My inspection of the well site and injection facility found no violations. The pump was off at the time.
2145090929 2016-08-23 Salt Water Injection Well No Violations The injection well and surface facility were inspected. The gate was locked. The pump was not operating. There were no violations found at the time.
349466828 2003-10-7 0:00: SW No Violations
372455924 2011-11-14 0:00 SW No Violations
513467342 2002-12-6 0:00: SW No Violations
609934605 2015-9-24 0:00: SW No Violations
692401379 2015-5-11 0:00: SW No Violations
718050614 2005-5-17 0:00: SW No Violations
727979154 2007-2-20 0:00: SW No Violations
840145097 2008-7-15 0:00: SW No Violations
89458342 2018-5-17 0:00: SW No Violations 1.40
964262220 2019-5-21 0:00: SW No Violations 1.30
964959594 2017-9-21 0:00: SW No Violations 1.20
UIC1409 1993-5-11 0:00: SW No Violations
UIC1410 1993-5-11 0:00: SW No Violations
UIC1411 1993-5-11 0:00: SW No Violations
UIC491 1988-1-25 0:00: SW No Violations
UIC492 1988-1-25 0:00: SW No Violations
UIC493 1988-1-25 0:00: SW No Violations
UIC494 1988-1-25 0:00: SW No Violations
UIC942 1990-7-9 0:00:0 SW No Violations
UIC943 1990-7-9 0:00:0 SW No Violations
UIC944 1990-7-9 0:00:0 SW No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
1342104637 US-OH-109872 2012-08-24 Pollution/Contamination
1715919476 US-OH-117014 2017-11-21 9-3-04(A) Pollution/Contamination
2059367429 US-OH-120984 2011-10-21 Exceeding maximum allowable injection pressure

For data sources see[5]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "Risk Based Data Management System - tblStimulation Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  5. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://wellwiki-prod.cloud.arc.gwu.edu/index.php?title=34-055-20773&oldid=14238731"