If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.
powered by ChangeDetection
Well ID: 34-059-21192 | |
Country: United States | |
State: Ohio | |
County: Guernsey | |
Municipality: Monroe Township | |
Operator Name: BIG SKY ENERGY INC | |
Well Pad ID: | |
Farm/Lease Name: MCCRACKEN ELLIS | |
License Status: Producing | |
License Date: 1970-01-16 | |
Spud Date: 1970-05-01 | |
Spud Drilling Contractor: | |
Final Drill Date: 1970-05-07 | |
Well Total Depth: 5360.00 ft | |
Configuration: Vertical | |
Latitude: 40.200000 | |
Longitude: -81.460000 |
For data sources see[1]
Well Status | Well Status Date | Comment |
---|---|---|
CO | 1970-01-16 | 1333 BARR ROBT/dba BIG SKY PET GeoDate 1/16/70 |
Original Spud | 1970-05-01 | R.L. 4-23-70 |
Completed | 1970-05-07 | R.L. 4-23-70 |
Reached Total Depth | 1970-05-07 | R.L. 4-23-70 |
Construction Permit Expires | 1971-01-16 | R.L. 4-23-70 |
Record Last Modified | 2013-10-03 | R.L. 4-23-70 |
For data sources see[2]
Perforation Date | Interval Top (ft) | Interval Base (ft) | Number of Shots |
---|---|---|---|
2006-09-11 | 5287 | 5327 | 0 |
5287 | 5327 | 0 | |
5287 | 5327 | 0 |
For data sources see[3]
Stimulation Date | Chemical Agent | Chemical Agent Concentration (%) | Fracking Fluid Volume | Mass of Proppant Used (lb) | Fracking Company | Comments |
---|---|---|---|---|---|---|
H2O | 0 | 1653 Bbl | 50000 |
For data sources see[4]
Period | Operator Name | Gas Quantity (mcf) | Oil Quantity (bbl) | Production Days |
---|---|---|---|---|
1984 | JAMES DRILLING CORP | 894.00 | 0.00 | 0 |
1985 | JAMES DRILLING CORP | 1311.00 | 0.00 | 0 |
1986 | JAMES DRILLING CORP | 754.00 | 0.00 | 365 |
1987 | JAMES DRILLING CORP | 1423.00 | 0.00 | 365 |
1988 | JAMES DRILLING CORP | 1389.00 | 0.00 | 365 |
1989 | JAMES DRILLING CORP | 0.00 | 1096.00 | 365 |
1990 | JAMES DRILLING CORP | 727.00 | 0.00 | 365 |
1993 | BIG SKY ENERGY INC | 5320.00 | 0.00 | 365 |
1995 | BIG SKY ENERGY INC | 0.00 | 0.00 | 365 |
1996 | BIG SKY ENERGY INC | 0.00 | 0.00 | 0 |
1998 | BIG SKY ENERGY INC | 286.00 | 0.00 | 365 |
2000 | BIG SKY ENERGY INC | 0.00 | 0.00 | 365 |
2001 | BIG SKY ENERGY INC | 213.00 | 0.00 | 365 |
2003 | BIG SKY ENERGY INC | 612.00 | 0.00 | 365 |
2004 | BIG SKY ENERGY INC | 70.00 | 0.00 | 365 |
2005 | BIG SKY ENERGY INC | 1040.00 | 0.00 | 365 |
2006 | BIG SKY ENERGY INC | 958.00 | 0.00 | 365 |
2007 | BIG SKY ENERGY INC | 890.00 | 0.00 | 365 |
2008 | BIG SKY ENERGY INC | 237.00 | 0.00 | 365 |
2009 | BIG SKY ENERGY INC | 69.00 | 0.00 | 365 |
2011 | BIG SKY ENERGY INC | 2.00 | 0.00 | 365 |
2012 | BIG SKY ENERGY INC | 374.00 | 0.00 | 366 |
2013 | BIG SKY ENERGY INC | 211.00 | 0.00 | 250 |
2014 | BIG SKY ENERGY INC | 0.00 | 0.00 | 250 |
2016 | BIG SKY ENERGY INC | 0.00 | 0.00 | 0 |
2017 | BIG SKY ENERGY INC | 0.00 | 0.00 | 0 |
Period | Operator Name | Waste Type | Quantity (bbl) | Production Days |
---|---|---|---|---|
1984 | JAMES DRILLING CORP | Brine | 164 | 0 |
1985 | JAMES DRILLING CORP | Brine | 0 | 0 |
1986 | JAMES DRILLING CORP | Brine | 0 | 365 |
1987 | JAMES DRILLING CORP | Brine | 25 | 365 |
1988 | JAMES DRILLING CORP | Brine | 25 | 365 |
1989 | JAMES DRILLING CORP | Brine | 0 | 365 |
1990 | JAMES DRILLING CORP | Brine | 0 | 365 |
1993 | BIG SKY ENERGY INC | Brine | 0 | 365 |
1995 | BIG SKY ENERGY INC | Brine | 0 | 365 |
1996 | BIG SKY ENERGY INC | Brine | 0 | 0 |
1998 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2000 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2001 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2003 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2004 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2005 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2006 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2007 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2008 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2009 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2011 | BIG SKY ENERGY INC | Brine | 0 | 365 |
2012 | BIG SKY ENERGY INC | Brine | 0 | 366 |
2013 | BIG SKY ENERGY INC | Brine | 0 | 250 |
2014 | BIG SKY ENERGY INC | Brine | 0 | 250 |
2016 | BIG SKY ENERGY INC | Brine | 0 | 0 |
2017 | BIG SKY ENERGY INC | Brine | 0 | 0 |
Inspection ID | Inspection Date | Inspection Type | Inspection Result | Inspection Comments |
---|---|---|---|---|
-1076744671 | 2019-12-17 0:00 | PW | No Violations | 0.60 |
-1355178103 | 2020-6-5 0:00:0 | PW | No Violations | 1.00 |
-1545288522 | 2019-3-13 0:00: | PW | No Violations | 1.20 |
-1786204093 | 2015-4-28 0:00: | PW | No Violations | 1.00 |
-1881297950 | 2006-6-12 0:00: | PW | No Violations | |
-2035902697 | 2012-4-4 0:00:0 | PW | No Violations | |
-448913109 | 2014-12-2 0:00: | PW | No Violations | 1.50 |
0054948928 | 2008-05-01 | Production Wells | No Violations | BARR POSTED ID ON WELLHEAD. |
0132789462 | 2019-01-22 | Production Wells | No Violations
--105, and Compliance Notices -1357818813. No corrections have been made to gain compliance. | |
0232373594 | 2014-02-10 | Production Wells | No Violations | On the day of my inspection following up NOV-1357818813, the ground was snow covered and I witnessed that compressor unit along the lease road was not running but the power was switched to auto. The lease road was gated and locked and the well was equipped with 8.625 inch casing, 4.5 inch casing, 2.375 inch tubing, a plunger lift system and a logic controller. The valves were open on the flow line and opposite the flow line the valve was open to the atmosphere. The tank battery consisted of a 2-100bbl tanks which did not meet the minimum spacing requirements of 36 inches vertical separator. Identification was present but not legible. |
0277686913 | 2007-08-02 | Production Wells | No Violations | ID REWRITTEN. |
0279441163 | 2016-04-17 | Production Wells | No Violations
---1357818813 and NOV-2035902697, I witnessed the lease road was gated, locked and impassible due to erosion. The well was equipped with 8.625 inch casing; 4.5 inch casing, 2.375 inch tubing and a plunger lift system with valves on the tubing in the closed position. A light gas smell was present at the wellhead and utilizing an ODNR Honeywell PhD6 meter revealed no gas detected. The production equipment included 2-100bbl tanks which did not meet the minimum spacing requirements of 36 inches within an earthen dike and a vertical separator. No identification was present with production records were current with zero production reported for 2014. | |
0322218128 | 2015-10-14 | Production Wells | No Violations | On the day of my inspection following up NOV-1357818813 and NOV-2035902697, I witnessed that compressor unit along the lease road was running but the power was switched to auto. The lease road was gated, locked and impassible. The well was equipped with 8.625 inch casing; 4.5 inch casing, 2.375 inch tubing and a plunger lift system with valves on the tubing in the closed position. The production equipment included 2-100bbl tanks which did not meet the minimum spacing requirements of 36 inches and a vertical separator. Identification was present but not legible and no production has been reported for 2014. |
0436765810 | 2012-04-04 | Production Wells | No Violations | FOLLOW UP TO NOV # -2035902697 Inspection revealed that well is shut in and is equipped with conductor pipe and 8 surface casing and 4.5 production casing and 2 tubing and 2-100 bbl tanks which are located to close together and one of them is showing signs of seepage.
PLUG WELL WITHIN 60 DAYS OF FILE FOR TEMPORARY INACTIVE STATUS IF PLACED INTO PRODUCTION PROPERLY SPACE TANKS AND CONSTRUCT DIKE AROUND TANKS AND PROPERLY I.D. WELLHEAD. Failure to comply may result in bond forfeiture. |
0448913109 | 2014-12-02 | Production Wells | No Violations | On the day of my inspection following up NOV-1357818813 and NOV-2035902697 accompanied by Bob Barr President of Big Sky Energy, I witnessed that compressor unit along the lease road was not running but the power was switched to auto. The lease road was gated and locked and the well was equipped with 8.625 inch casing, 4.5 inch casing, 2.375 inch tubing, a plunger lift system and a logic controller. The valves were open on the flow line and opposite the flow line the valve was open to the atmosphere. The tank battery consisted of a 2-100bbl tanks which did not meet the minimum spacing requirements of 36 inches and a vertical separator. Identification was present but not legible. Mr. Barr shut valve on casing for isolation purposes. Dan Goins presented Mr. Barr with current NOV-1357818813 and NOV-2035902697 for said well. |
0549960971 | 2019-03-13 | Production Wells | No Violations | The inspection is a Compliance Notice follow---inch tubing. The Demco tubing valve was closed, the two tubing valves were closed and the one casing valve is closed. There was a logic control box, murphy switch and motor valve that were not working. There was a small piece of pipe holding up the valve on the motor valve and no bull plug at the casing valve. The tank site consists of [2]100-barrel steel tanks placed within 8 inches of each other and 1 vertical separator with no pressure on the unit. The tanks are enclosed within an earthen impoundment and there was no identification posted. The briars have grown up around the production equipment and the well. The gas was till venting into the atmosphere. There was a sour gas smell but could not get readings with the Ventis pro 4 gas meter. |
0664981207 | 2006-05-31 | Production Wells | No Violations | PRODUCING WELL. ID REPOSTED. P/C IN DIKE AREA CLEANED UP. |
0710188590 | 2016-03-17 | Production Wells | No Violations
-1357818813 and NOV-2035902697, I witnessed that compressor unit along the lease road was not running with the power switched to auto. The lease road was gated, locked and impassible due to erosion. The well was equipped with 8.625 inch casing; 4.5 inch casing, 2.375 inch tubing and a plunger lift system with valves on the tubing in the closed position. The production equipment included 2-100bbl tanks which did not meet the minimum spacing requirements of 36 inches within an earthen dike and a vertical separator. No identification was present and production records for 2014 have been submitted since the last inspection with zero production reported. | |
1137533818 | 2019-01-07 | Production Wells | Violations Noted | The inspection was conducted in response to Complaint number 6047 and follow---inch tubing. The Demco tubing valve was closed, the two tubing valves were closed and the one casing valve is closed. There was a logic control box, murphy switch and motor valve that were not working. There was a small piece of pipe holding up the valve on the motor valve and no bull plug at the casing valve. The tank site consists of [2]100-barrel steel tanks placed within 8 inches of each other and 1 vertical separator with no pressure on the unit. The tanks are enclosed within an earthen impoundment and there was no identification posted. The briars have grown up around the production equipment and the well. The company has 5 days to install the bull plugs needed and 5 days to prevent the well from emitting H2S from the well. |
1289424772 | 2019-01-22 | Production Wells | No Violations | The day of this inspection Austin Gutridge accompanied me on a compliance notice follow-up to number 1137533818 and complaint number 6047. We stopped at the entrance of the well. The snow and ice made the road impassable to get to the well. |
132789462 | 2019-1-22 0:00: | PW | No Violations | 3.00 |
1334453895 | 2017-01-26 | Production Wells | No Violations
---1357818813 and NOV-2035902697, I witnessed the lease road was gated, locked and impassible due to erosion. The well was equipped with 8.625 inch diameter casing; 4.5 inch diameter casing, 2.375 inch diameter tubing and a plunger lift system with valves on the tubing in the closed position. A strong gas smell was present at the wellhead and utilizing an ODNR Honeywell PhD6 meter revealed LEL levels at 6. The production equipment included 2-100 barrel tanks which do not meet the minimum spacing requirements of 36 inches within an earthen dike and a vertical separator. No identification was present and the production records were not current. | |
1357682473 | 2013-01-08 | Administrative Inspection | No Violations | As per Mike Hartshorns inspection revealing that well is capable of producing resolving previous compliance notice issued for idle well owner has complied with issue and has placed dike around tanks but has failed to correct spacing requirement and has not properly identified well and has not complied with request to report production as required by law, local inspector Mike Hartshorn will reissue notice for tank spacing requirement and to post proper identification.
Note: Received notice from landowners attorney stating that lease has been cancelled and current owner has no right to attempt to produce well. |
1357818813 | 2013-01-10 | Production Wells | Violations Noted | On the ninth day of January 2013, I made an attempt to contact Big Sky Petroleum LLC and left a message with Bob Barr to let him know that enforcement may be required due to lease cancellation on pursuant to affidavit of forfeiture see O.R. 491 Pg. 1339 see O.R. 493 Pg 1232. I left a message on Bob Barrs voice mail to return my call. On the tenth of January 2013 I received a phone call from Bob Barr, he informed me that he complied with the state and the well was back in production. After speaking with Mr. Barr I drove to the well site to do an inspection, the inspection revealed at the well head the two inch gate valve was open as well as the valve on the production line. There is no identification posted, there has been no production records recorded since the year of 2009. There is a compressor at the beginning of the entry way leading back to the well site. The violations at the well site are, / 1501: 9-9-05(A)10 failure to legible identify well/ 9-9-05(A)2 violation of tank spacing/ 1509.11. Statement of production. The requirements to meet the divisions standards will be, 1. Properly identify the well 2. Meet the minimum requirements of three foot spacing between the tanks. 3. Meet the divisions standards for the statement of production. |
1469477231 | 2006-10-11 | Production Wells | No Violations | PRODUCING WELL |
1545288522 | 2019-03-13 | Production Wells | No Violations
--105, and Compliance Notice -1357818813. During our inspection today, we traveled the heavily eroded lease road on foot back to the well. The well was equipped with 8.625-inch diameter surface casing with a casing head, 4.5-inch diameter production casing with a tubing head, 2.375-inch diameter tubing, and a plunger lift system. All valves were in the closed position. The Demco master valve was in the closed position on the tubing and no lines were attached to the production casing. A sour gas smell can be identified by the wellhead. While utilizing the Ventis pro 4 gas detector no Hydrogen Sulfide Gas recordings were detected. The production equipment consisted of two 100-barrel tanks and one vertical separator. The two 100-barrel tanks were within 3-feet apart and did not meet spacing requirements stated in the Ohio Administrative Code 1501:9-9-05(A)(2). Identification was not posted within a conspicuous place near the wellhead or production equipment. | |
1566316960 | 2019-8-20 0:00: | PW | No Violations | 0.50 |
1586528375 | 2020-4-10 0:00: | PW | No Violations | 1.00 |
1786204093 | 2015-04-28 | Production Wells | No Violations | On the day of my inspection following up NOV-1357818813 and NOV-2035902697, I witnessed that compressor unit along the lease road was running but the power was switched to auto. The lease road was gated and locked and the well was equipped with 8.625 inch casing, 4.5 inch casing, 2.375 inch tubing and a plunger lift system with valves on the tubing in the closed position. The production equipment included 2-100bbl tanks which did not meet the minimum spacing requirements of 36 inches and a vertical separator. Identification was present but not legible and no production has been reported for 2013 and 2014. |
1881297950 | 2006-06-12 | Production Wells | No Violations | PRODUCING WELL. |
2035902697 | 2012-04-04 | Production Wells | Violations Noted | Inspection revealed that well is shut in and is equipped with conductor pipe and 8 surface casing and 4.5 production casing and 2 tubing and 2-100 bbl tanks which are located to close together and one of them is showing signs of seepage.
PLUG WELL WITHIN 60 DAYS OF FILE FOR TEMPORARY INACTIVE STATUS IF PLACED INTO PRODUCTION PROPERLY SPACE TANKS AND CONSTRUCT DIKE AROUND TANKS AND PROPERLY I.D. WELLHEAD. Failure to comply may result in bond forfeiture. |
2040471187 | 2018-02-06 | Production Wells | No Violations
---1357818813 and NOV-2035902697, I witnessed the lease road was gated, locked and impassible due to erosion. The well was equipped with 8.625 inch diameter casing; 4.5 inch diameter casing, 2.375 inch diameter tubing and a plunger lift system with valves on the tubing in the closed position. A strong gas smell was present at the wellhead and utilizing an ODNR Honeywell PhD6 meter revealed LEL levels at 8 with visible bubbling around the packing on the 4.5 inch diameter casing. The production equipment included 2-100 barrel tanks which do not meet the minimum spacing requirements of 36 inches within an earthen dike and a vertical separator. No identification was present and the production records were current. | |
232373594 | 2014-2-10 0:00: | PW | No Violations | 1.00 |
277686913 | 2007-8-2 0:00:0 | PW | No Violations | |
279441163 | 2016-4-17 0:00: | PW | No Violations | 1.00 |
322218128 | 2015-10-14 0:00 | PW | No Violations | 1.00 |
436765810 | 2012-4-4 0:00:0 | PW | No Violations | |
54948928 | 2008-5-1 0:00:0 | PW | No Violations | |
549960971 | 2019-3-13 0:00: | PW | No Violations | 1.30 |
664981207 | 2006-5-31 0:00: | PW | No Violations | |
703979643 | 2020-11-3 0:00: | PW | No Violations | 1.00 |
710188590 | 2016-3-17 0:00: | PW | No Violations | 1.50 |
Inspection ID | Violation ID | Violation Date | Violation Code | Violation Comments |
---|---|---|---|---|
1137533818 | US-OH-103469 | 2019-01-11 | 9-9-05(A)1 | Well insufficiently equipped to prevent escape of oil and gas |
1137533818 | US-OH-103470 | 2019-01-11 | 9-9-05(D) | Failure to have required locks, bull plugs |
1357818813 | US-OH-110353 | 2013-02-27 | Failure to legibly identify well | |
1357818813 | US-OH-110354 | 2013-02-27 | Violation of tank spacing requirements | |
2035902697 | US-OH-120708 | 2013-01-11 | Well operation causing pollution and contamination | |
2035902697 | US-OH-120709 | 2013-01-11 | General Safety | |
2035902697 | US-OH-120710 | 2013-01-11 | Failure to legibly identify well | |
2035902697 | US-OH-120711 | 2013-01-11 | No SPCC dike/or failure to keep dike free of water or oil | |
2035902697 | US-OH-120712 | 2013-01-11 | Well shall be plugged | |
2035902697 | US-OH-120713 | 2013-01-11 | Nonproduction; well shall be plugged or placed in temporary inactive status |
For data sources see[9]