X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-059-24356

Well Details

Well ID: 34-059-24356
Loading map...
Country: United States
State: Ohio
County: Guernsey
Municipality: Millwood Township
Operator Name: ANTERO RESOURCES CORPORATION
Well Pad ID: US-OH-000914
Farm/Lease Name: J HALL UNIT
License Status: Producing
License Date: 2014-03-28
Spud Date: 2014-04-24
Spud Drilling Contractor: SIDEWINDER DRILLING INC
Final Drill Date: 2014-10-18
Well Total Depth: 14360.00 ft
Configuration: Horizontal
Latitude: 39.990000
Longitude: -81.260000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2014-03-28 Proposed Formations:UTICA/POINT PLEASANT, Issued Date:3/28/2014, Expired Date:3/27/2016 12:00:00 PM, Drilling unit acres:594.37, Proposed Well Type:OG, Proposed Well Class:POOL
Correction to Well 2014-06-06 UNIT SIZE DECREASED TO 428.96 ACRES.
Reached Total Depth 2014-10-18
Correction to Well 2015-01-02 CHANGE IN TARGET AND TAKE-POINT INFORMATION (FOOTAGES AND COORDINATES) FROM AS DRILLED SURVEY PLAT.
Completion Report Received 2015-05-05
Correction to Well 2015-08-26 UPDATE TO TAKE-POINT FOOTAGE AND COORDINATES FROM AS DRILLED SURVEY PLAT.
Construction Permit Expires 2016-03-27
Change of Owner 2017-02-15 Operator changed from 8894, R E GAS DEVELOPMENT LLC to 8943, ANTERO RESOURCES CORPORATION
Record Last Modified 2017-10-24

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2015-01-15 8853 14351 0
8853 14351 0
8853 14351 0

For data sources see[3]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 11/10/2014 12/09/2014 8156 10,114,200.0 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 Acid Inhibitor, Unihib G GeoSafe Acid Inhibitor Formaldehyde 50-00-0 1 0.00000470 4.567
Methanol 67-56-1 5 0.00002352 22.833
Short Chained Glycol Ether 112-34-5 60 0.000282214 273.996
Ethoxylated alcohol 68002-97-1 35 0.000164625 159.831
Thiourea 62-56-6 1 0.00000470 4.567
Acetophenone 98-86-2 1 0.00000470 4.567
Sodium Perborate Tetrahydrate Global Chemical Resources Friction Reducer Breaker Sodium Perborate 7632-04-4 98.6 0.00002234 21.692
Slurry Gel, WGA-7 SLR PolyFrac Plus Gel Clay 14808-60-7 5 0.000385814 374.578
Guar Gum 9000-30-0 45 0.00347232 3371.2
Surfactant 154518-36-2 5 0.000385814 374.578
Petroleum Distillate 64742-47-8 45 0.00347232 3371.2
AP Breaker Sagar Enterprise Gel Breaker Ammonium Persulfate 7727-54-0 100 0.00006386 62
Friction Reducer, Unislick ST-50 CESI Chemical Friction Reducer Petroleum distillates, hydrotreated light 64742-47-8 30 0.0291317 28283.3
Other - (non-hazardous) NA 70 0.0679739 65994.3
Chlorine Dioxide Baker Hughes Biocide Chlorine Dioxide 1049-04-4 0.3 0.000615763 597.83
Clay Stabilizer, Cla-Chek G Shrieve Clay Stabilizer Water 7732-18-5 15 0.00049014 475.865
Other - (non-hazardous) NA 85 0.00277746 2696.57
Other Chemicals Sodium Bisulfate 7631-90-5 0 0.00001983 0
Sodium Sulfonate 870-72-4 0 0.00000577 0
Water 7732-18-5 0 0.001442 0
Water Rex Energy Carrier/Base Fluid Water 7732-18-5 100 86.9351 84,403,200.0
ScaleSorb 7 Baker Hughes Scale Inhibitor Organo Phosphorus Salt NA 30 0.0010815 1050
Diatomaceous Earth, Calcined 91053-39-3 100 0.00360499 3500
Sodium Chloride 7647-14-5 10 0.000360499 350
Crystalline Silica (Quartz) 14808-60-7 1 0.00003605 35
Sand (Proppant) Sargent/Momentive/Preffered Proppant Silica Substrate 14808-60-7 100 11.9311 11,583,600.0
Scale Inhibitor, ScaleHib A Nalco Scale Inhibitor Ethylene Glycol 107-21-1 30 0.00632214 6138.02
Other - (non-hazardous) NA 70 0.0147517 14322
Hydrochloric Acid (10%) PVS Acidizing Water 7732-18-5 90 0.433664 421035
Hydrochloric Acid 7647-01-0 10 0.0481849 46781.7
Hydrochloric Acid (7.5%) PVS Acidizing Hydrochloric Acid 7647-01-0 7.5 0.0376085 36513.2
Water 7732-18-5 92.5 0.463838 450330
Parasorb 5005 Baker Hughes Paraffin Inhibitor Naphthalene 91-20-3 1 0.00009012 87.5
Mineral Oil 8042-47-5 5 0.000450623 437.5
Complex Ester 68607-07-8 30 0.00270374 2625
Ethylene-Vinyl Acetate Copolymer NA 5 0.000450623 437.5
Calcined Diatomaceous Earth 91053-39-3 100 0.00901247 8750
Crystalline Silica: Quartz (SiO2) 14808-60-7 1 0.00009012 87.5
Heavy Aromatic Naphtha 64742-94-5 10 0.000901247 875

For data sources see[4]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
2014-11-03 H2O 8 2934 Bbl 170000 Universal Well Services Inc. STAGE 1/36

60 SHOTS STAGES 2-35 SEE IMAGES

2014-12-09 H2O 8 6754 Bbl 321500 Universal Well Services Inc. STAGE 36/36

60 SHOTS

For data sources see[5]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2015 R E GAS DEVELOPMENT LLC 1251755 44465 358
2016 R E GAS DEVELOPMENT LLC 658404 6309 355
2017 ANTERO RESOURCES CORPORATION 339108 2018 286
2018 ANTERO RESOURCES CORPORATION 328691 850 364
2019 ANTERO RESOURCES CORPORATION 69852 4 90

For data sources see[6] [7]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2015 R E GAS DEVELOPMENT LLC Brine 16197 358
2016 R E GAS DEVELOPMENT LLC Brine 6893 355
2017 ANTERO RESOURCES CORPORATION Brine 2519 286
2018 ANTERO RESOURCES CORPORATION Brine 2990 364
2019 ANTERO RESOURCES CORPORATION Brine 465 90

For data sources see[8] [9]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1354133437 2015-7-21 0:00: PW No Violations 4.50
-1887276422 2014-10-20 0:00 DD No Violations 3.50
-771754399 2015-2-25 0:00: PL No Violations 0.50
-949747501 2016-3-22 0:00: PW No Violations 0.50
0152869470 2016-10-20 Production Wells No Violations On the day of my inspection I witnessed that annular monitoring is now in place. The well was equipped with a production tree with valves in the open position and a gauge present read 710 pounds per square inch on the casing. Production equipment included a sand trap, a line heater and a GP Unit with a 4 inch sales meter with a 2 inch orifice and chart recorder. Also present an oil stabilizer unit, a vapor recovery system, 15-400 barrel tanks all within containment and a gas combustor all shared with the 4H, 6H, 8H, 10H and the 12H.
0179100796 2016-04-28 Production Wells No Violations On the day of my inspection I witnessed the well was equipped with a production tree with valves in the open position and a gauge present read 755psi on the casing. Production equipment included a sand trap, a line heater and a GP Unit with a 4 inch sales meter with a 2.75 inch orifice and chart recorder. Also present an oil stabilizer unit, a vapor recovery system, 15-400bbl tanks all within containment and a gas combustor all shared with the 4H, 6H, 8H, 10H and the 12H.
0186937423 2019-03-06 Production Wells No Violations The purpose of my inspection was a status check. During my inspection the well was equipped with a plunger lift system with valves in the open position. Annular pressure monitoring was present and evaluated. The production equipment consisted of six gas production units, one triethylene glycol dehydration unit with a contact tower and reboiler, and fifteen 400-barrel tanks with vent lines plumbed to a compressor and one combustor. The identification was located on the wellhead.
0474621576 2017-02-13 Production Wells No Violations On the day of my inspection I witnessed the well was equipped with a production tree with valves in the open position and a gauge present read 640 pounds per square inch on the casing with annular pressure monitoring in place Production equipment included a sand trap, a line heater and a GP Unit with a 4 inch sales meter with a 2 inch orifice and chart recorder. Also present an oil stabilizer unit, a vapor recovery system, 15-400 barrel tanks all within containment and a gas combustor all shared with the 4H, 6H, 8H, 10H and the 12H.
0771754399 2015-02-25 Preliminary Restoration No Violations On the day of my inspection I witnessed that flow back has been completed and the well is online and equipped with a production tree with valves in the open position. Production equipment included a sand trap, a GP Unit, an oil stabilizer unit, a vapor recovery system and a total of 15-400bbl tanks all within containment. The site passed preliminary restoration according to ORC 1509.072A.
0949747501 2016-03-22 Production Wells No Violations On the day of my inspection I witnessed the well was equipped with a production tree with valves in the open position and a gauge present read 820psi on the casing. Production equipment included a sand trap, a line heater and a GP Unit with a 4 inch sales meter with a 2.75 inch orifice and chart recorder. Also present an oil stabilizer unit, a vapor recovery system, 15-400bbl tanks all within containment and a gas combustor all shared with the 4H, 6H, 8H, 10H and the 12H.
0951921227 2014-12-15 Completion Testing No Violations On the day of my inspection accompanied by ODNR Southeast Regional Manager Brent Bear, I witnessed that the frac was completed and awaiting completion rig to drill out plugs. Production equipment was being installed with a sand trap, GP Unit, oil stabilizer unit, gas recovering system along with 400bbl stock tanks for brine and oil.
1307293053 2019-11-27 0:00 PW No Violations 0.20
1354133437 2015-07-21 Production Wells No Violations At 4:17pm I called Production Supervisor Paul Arblaster and asked if they had a fire at the J Hall or the J Anderson and he stated that they did at the J Hall and it was out as he was just arriving at the site. Upon my arrival at 5:07pm I met with Mr. Arblaster and Construction Supervisor Jim Taydus and completed walk around discussing the incident. Mr. Titus stated that Jennings Contractors: Jason Matthews, John Lowe and Cody Dison were disconnecting a temporary flare stack along with the piping and preparing to install a gas combustor. Mr. Dison was hitting a 3 inch hammer union which was isolated and going to the old flare stack when the threads came apart on a live 4 inch Vapor Recovery Line which was upstream at a tee resulting in vapors being released and then ignited by the Profire control box which controls the burners on the GP Unit for the J Hall 2H. All 4 men were accounted for and then Mr. Taydus shut the 6 wells in and called 911 at 2:40pm. Mr. Taydus accessed the fire, the wind and proceeded to extinguish the fire with a single fire extinguisher and then he shut the vapor recovery system down. Jennings contractors met with the Quaker City Fire Department at the entrance to the well pad and told them that the fire was out and they were not needed. Repairs were made to the Vapor Recovery Line and the 5 of the 6 wells were put back online at 6:10pm with the 2H being shut-in until repairs to the Profire control box could be completed. I placed call to REX Energy HSE Supervisor Derrick Smith and stated that when they have an incident on one of their sites that ODNR needs to be notified and he stated that it was his fault that ODNR was not notified and that proper notification would be made in the future.
152869470 2016-10-20 0:00 PW No Violations 0.30
1739215621 2018-07-24 Production Wells No Violations The purpose of my inspection was a status check. During my inspection the well was equipped with a plunger lift system with valves in the open position. A pressure gauge was present on all casing strings along with a pressure relief valve on the annulus. The production equipment consisted of six gas production units, one combustor, and fifteen 400-barrel tanks. A triethylene glycol dehydration unit with a contact tower and reboiler was located by the tank battery. The identification was located on the wellhead.
179100796 2016-4-28 0:00: PW No Violations 0.20
1797876795 2016-06-20 Production Wells No Violations On the day of my inspection I witnessed the well was equipped with a production tree with valves in the open position and a gauge present read 765psi on the casing. Production equipment included a sand trap, a line heater and a GP Unit with a 4 inch sales meter with a 2 inch orifice and chart recorder. Also present an oil stabilizer unit, a vapor recovery system, 15-400bbl tanks all within containment and a gas combustor all shared with the 4H, 6H, 8H, 10H and the 12H. I placed call to REX Energy EHS Supervisor Derrick Smith and I stated that valves were in place for annular monitoring but no gauges or relief valves. Mr. Smith stated that the work would be completed by the end of the week.
186937423 2019-3-6 0:00:0 PW No Violations 0.30
1887276422 2014-10-20 Drill / Deepen / Reopen No Violations
474621576 2017-2-13 0:00: PW No Violations 0.50
951921227 2014-12-15 0:00 CT No Violations 2.00

For data sources see[10]

References