X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-075-25019

Well Details

Well ID: 34-075-25019
Loading map...
Country: United States
State: Ohio
County: Holmes
Municipality: Berlin Township
Operator Name: DOVER ATWOOD CORP.
Well Pad ID:
Farm/Lease Name: WILLIS MAST UNIT(SWIW #5)
License Status: Active Injection
License Date: 2010-05-03
Spud Date: 1991-10-25
Spud Drilling Contractor: [[P&R INC [PEEK & ROWAN]]]
Final Drill Date: 1991-11-03
Well Total Depth: 6376.00 ft
Configuration: Vertical
Latitude: 40.550000
Longitude: -81.850000

For data sources see[1]

Well History

Well Status Well Status Date Comment
Oil and Gas 1991-10-11 Issued Date 10/11/91 Expired Date 10/10/92 Acres 0040000 Tool Type RTAF Proposed Formation ROSE RUN/MT. SIMON Proposed Depth 06376 Proposed Drill Depth 06376
Original Spud 1991-10-25
Completed 1991-11-03
Reached Total Depth 1991-11-03
CO 1992-04-08 627 KENOIL GeoDate 10/11/91
Completion Report Received 1992-05-07
APP 2009-03-30 Proposed Formations:ROSE RUN, Issued Date:3/30/2009, Expired Date:3/30/2010 6:00:00 AM, Drilling unit acres:36.8, Proposed Well Type:OG, Proposed Well Class:
Change of Owner 2009-12-31 Operator changed from 627, KENOIL to 5935, DOVER ATWOOD CORP.
Annulus Pressure Monitoring Approved 2010-05-03
APP 2010-05-03 Proposed Formations:ROSE RUN, Issued Date:5/3/2010, Expired Date:5/3/2011 6:00:00 AM, Drilling unit acres:0, Proposed Well Type:SWD, Proposed Well Class:SWIW
Construction Permit Expires 2011-05-03
Last Compliance Report 2011-11-21
Record Last Modified 2017-02-15

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2006-09-11 6134 6142 17
6131 6316 0
2006-09-11 6154 6160 13
6134 6142 17
6131 6316 0
2006-09-11 6164 6174 14
1997-06-29 6131 6316 0
2006-09-11 6186 6194 17

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
2014-04-15 ACID 0 500 Gal 0 Universal Well Services Inc. Took 300 gallons of acid on vacuum and then started bucking pressure. Pumped the balance of the acid at 550 psig and the water flush at 700 psig. Pumping into the formation helped to bring the pressure down.
ACID 0 2000 Gal 0 ACIDIZED W/2000 GAL

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
1991 KENOIL LLC 0.00 376.00 365
1992 KENOIL LLC 13929.00 4782.00 365
1993 KENOIL LLC 12618.00 2225.00 365
1994 KENOIL LLC 5969.00 607.00 0
1995 KENOIL LLC 6210.00 464.00 0
1996 KENOIL LLC 5433.00 455.00 0
1997 KENOIL LLC 3547.00 299.00 365
1998 MASON DRILLING INC 454.00 118.00 365
1999 KENOIL LLC 2986.00 208.00 0
2000 KENOIL LLC 3476.00 234.00 365
2001 KENOIL LLC 3567.00 741.00 365
2002 KENOIL LLC 5504.00 328.00 365
2003 KENOIL LLC 4377.00 278.00 365
2004 KENOIL LLC 1962.00 148.00 365
2005 KENOIL LLC 2422.00 0.00 365
2006 KENOIL LLC 1986.00 343.00 365
2007 KENOIL LLC 1608.00 262.00 365
2008 KENOIL LLC 1288.00 136.00 365
2009 DOVER ATWOOD CORP. 0.00 0.00 365
2010 DOVER ATWOOD CORP. 0.00 0.00 365
2011 DOVER ATWOOD CORP. 0.00 0.00 365

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
1991 KENOIL LLC Brine 2080 365
1992 KENOIL LLC Brine 3259 365
1993 KENOIL LLC Brine 2824 365
1994 KENOIL LLC Brine 1373 0
1995 KENOIL LLC Brine 1378 0
1996 KENOIL LLC Brine 1900 0
1997 KENOIL LLC Brine 2299 365
1998 KENOIL LLC Brine 2529 365
1999 KENOIL LLC Brine 2072
2000 KENOIL LLC Brine 2209 365
2001 KENOIL LLC Brine 5003 365
2002 KENOIL LLC Brine 4817 365
2003 KENOIL LLC Brine 4007 365
2004 KENOIL LLC Brine 3075 365
2005 KENOIL LLC Brine 1917 365
2006 KENOIL LLC Brine 4772 365
2007 KENOIL LLC Brine 3510 365
2008 KENOIL LLC Brine 2622 365
2009 KENOIL LLC Brine 34 365
2010 DOVER ATWOOD CORP. Brine 0 365
2011 DOVER ATWOOD CORP. Brine 0 365

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1048739498 2017-7-10 0:00: SW No Violations
-1069278250 2018-6-5 0:00:0 SW No Violations
-1092812441 2013-11-20 0:00 SW No Violations
-1108588693 2018-3-19 0:00: SW No Violations
-1133559732 2016-12-2 0:00: SW No Violations
-1140153723 2011-9-19 0:00: SW No Violations
-1161228735 2010-9-16 0:00: SW No Violations 2.00
-1261157801 2017-6-20 0:00: SW No Violations
-1288488491 2020-6-8 0:00:0 SW No Violations
-1433715336 2014-9-30 0:00: SW No Violations
-1443607107 2014-4-11 0:00: SW No Violations
-1569853261 2014-3-25 0:00: SW No Violations
-1629220186 2013-12-4 0:00: SW No Violations
-1653428008 2015-6-23 0:00: SW No Violations
-1740865350 2011-8-9 0:00:0 SW No Violations 2.00
-1743004951 2011-12-13 0:00 SW No Violations
-1759012944 2017-8-1 0:00:0 SW No Violations
-1760619700 2010-9-20 0:00: SW No Violations 6.50
-1785289801 2020-7-24 0:00: SW No Violations
-1804604766 2017-1-18 0:00: SW No Violations
-1806993767 2016-7-7 0:00:0 SW No Violations
-1818422436 2013-6-26 0:00: SW No Violations
-1916164202 2015-5-11 0:00: SW No Violations
-2071822202 2020-2-11 0:00: SW No Violations
-2073429525 2018-2-1 0:00:0 SW No Violations
-2101194897 2014-4-14 0:00: SW No Violations
-2129074027 2013-4-12 0:00: SW No Violations
-234093852 2013-9-23 0:00: SW No Violations
-314101495 2012-12-26 0:00 SW No Violations
-411793816 2011-11-14 0:00 SW No Violations
-417798712 2013-3-12 0:00: SW No Violations
-461200160 2012-9-5 0:00:0 SW No Violations
-467441825 2011-3-8 0:00:0 SW No Violations 2.00
-475710368 2014-1-8 0:00:0 SW No Violations
-511767675 2012-12-26 0:00 SW No Violations
-557714678 2012-6-26 0:00: SW No Violations
-581708600 2012-9-17 0:00: SW No Violations
-594399041 2010-11-1 0:00: SW No Violations 2.00
-820044478 2013-6-20 0:00: SW No Violations
0000009302 Preliminary Restoration No Violations PASSED Y WITNESSED 10/23/96 INSPECTOR BARRY GRIMM DATE 10/2319/96 DATA FROM OLD VAX INFO
0000009303 Preliminary Restoration No Violations PASSED Y WITNESSED 5/27/92 INSPECTOR JOHN BUREN DATE 05/2719/92 DATA FROM OLD VAX INFO
0006576346 2012-06-11 Salt Water Injection Well No Violations The tank facility has no issues. There are no violations at the well. The tubing was on vacuum and the annulus had a pressure of 45 psig.
0106704246 2015-03-11 Salt Water Injection Well No Violations Inspection revealed that well was in operation and it was noted that stone has been placed onto driveway that leads to storage area since my last inspection.
0148846261 2012-12-03 Salt Water Injection Well No Violations Inspection revealed that tubing pressure is on vacuum and annulus of tubing is on vacuum also, contacted Jim Hawkins and discussed potential tubing or packer failure possibilities and we plan on retesting well later this week.
0225661883 2011-04-12 Salt Water Injection Well No Violations Check on new pumphouse and found that the injection pump is inside the building but not connected. Well is on vacuum.
0234093852 2013-09-23 Salt Water Injection Well No Violations No violations noted at this time and owner has cleaned unloading pad area since my last inspection.
0269110839 2011-01-05 Salt Water Injection Well No Violations Operator called for test over holiday weekend - Injection line test still needs varified. No flow meter on-site.
0313292440 2013-04-01 Salt Water Injection Well No Violations Annular pressure 0 psig. The tubing was on vacuum. Pressure tested the annulus to 514 psig for 15 minutes with a pressure loss of 4 psig. Left the pressure on the annulus. No problems noted at the well or tank facility.
0314101495 2012-12-26 Salt Water Injection Well No Violations Checked two pen recorder and found that the annulus was back on vacuum. Called Dave Ball to report this status.
0325316019 2011-09-08 Final Restoration No Violations No sign of well or tank. Final Restoration passsed.
0347530352 2015-02-20 Salt Water Injection Well No Violations There were no problems noted at the tank facility at the time of the inspection. The valve on the line to the well was shut at the tank battery. No annular pressure was taken due to the cold weather. The tubing was on vacuum.
0411793816 2011-11-14 Salt Water Injection Well No Violations Rig moved on location and is rigged up. Unjayed Baker packer and started pulling tubing. Power tongs lost a bearing after 130 joints of tubing were pulled. Rigged down tongs and went to yard to repair them.
0417798712 2013-03-12 Salt Water Injection Well No Violations A service rig was moved on and rigged up and the tubing was un-jayed from the packer and pulled out of the hole. The tubing will be replaced and the on-off tool will be rebuilt.
0459129126 2012-05-13 Salt Water Injection Well No Violations No pump hooked up to well. There is a pump in the pump house but it has not been connected at this time.
0461200160 2012-09-05 Salt Water Injection Well No Violations Inspected site along with Todd Miller inspection revealed that pump was not in operation today and it was noted that vault within dike area had run over and I called well owner and requested clean up in this area.
0467339154 2016-08-15 Salt Water Injection Well No Violations There were no problems noted at the unloading facility/tank battery. The tubing is on vacuum and the annulus had 10 psig. The signage is visible at both locations.
0467441825 2011-03-08 Salt Water Injection Well No Violations There are now 4 - 210 bbl tanks hooked up inside a cement block containment area. The block is 3 1/2 ft tall and there is a cement floor which the tanks sit on. There now is a pumphouse along with a pump that has not been connected up to the line for injection at this time. Will collect photos as soon as everything is here and operating
0475710368 2014-01-08 Salt Water Injection Well No Violations There were no problems noted at the time of the inspection. Contacted the operator to pressure test the annulus.
0496515259 2015-11-09 Salt Water Injection Well No Violations Inspection on this day indicated that well is still on vacuum and it appears that injection pump has never been ran to date.
0511767675 2012-12-26 Salt Water Injection Well No Violations Inspection revealed that annulus of tubing is on vacuum and tubing is on vacuum also, called company rep requesting that they get service rig scheduled to work on said well, they installed two pen recorder and applied pressure to annulus last week and today annulus was on vacuum once again suspect possible tubing failure or packer has integrity issues will monitor site once service rig arrives on site to service said well.
0557714678 2012-06-26 Salt Water Injection Well No Violations Acid from completion water that someone brought into the facility ate up the aluminum cam-lock fitting on a hose between the tanks. An estimated 10 gallons of oil and salt water got out onto the concrete floor of the tank battery containment. No salt water or oil left the containment. The sump pump pumped the water back into the tanks. The hoses and camlock fittings have been removed and the tanks are now all plumbed in solid with steel pipe.
0581708600 2012-09-17 Salt Water Injection Well No Violations Oil on the floor inside the tank containment has been cleaned up as requested.
0594399041 2010-11-01 Salt Water Injection Well No Violations Ready to start injecting after line has been tested. Trucks are unloading into tanks but no pump has been set at this time.
0691014118 2018-08-29 Salt Water Injection Well No Violations Injection pump not in operation today.
0708172195 2010-09-13 Salt Water Injection Well No Violations Fishing for packer and tailpipe.
0730096753 2010-10-18 Salt Water Injection Well No Violations Line has been burried and tanks are in place. Almost ready to start injecting.
0820044478 2013-06-20 Salt Water Injection Well No Violations The annulus pressure was 280 psig and the tubing was on vacuum. There were no problems noted at the time of the inspection.
0923958969 2016-01-28 Salt Water Injection Well No Violations Inspection revealed that injection pump was not in operation during my inspection.
1048739498 2017-07-10 Salt Water Injection Well No Violations There were no problems noted at the facility. The ID is visible and in good repair. The well had 12 psig on the annulus and the tubing was on vacuum. The ID was visible and in good repair. I am waiting for a call from the operator to tell me when he is going to put more pressure on the annulus. The weather: overcast and raining hard.
1066307238 2015-11-20 Salt Water Injection Well No Violations There were no problems noted at the time of the inspection.
106704246 2015-3-11 0:00: SW No Violations
1067355337 2018-05-03 Salt Water Injection Well No Violations Inspection revealed that injection pump was not in operation during my inspection.
1069278250 2018-06-05 Salt Water Injection Well No Violations Inspection revealed that injection pump was not in operation during my inspection.
1085212485 2018-07-18 Salt Water Injection Well No Violations Inspection today revealed that injection pump was not in operation today.
1092812441 2013-11-20 Salt Water Injection Well No Violations The facility is in good condition with no problems noted. The well tubing is on vacuum and the annulus has 4 psig.
1108588693 2018-03-19 Salt Water Injection Well No Violations Inspection today indicated that injection pump was in operation during my inspection.
1133559732 2016-12-02 Salt Water Injection Well No Violations Inspection today revealed that injection pump was not in operation.
1140153723 2011-09-19 Salt Water Injection Well No Violations No problems noted at either well or facility. Both tubing and annulus on vacuum.
1161228735 2010-09-16 Salt Water Injection Well No Violations Fill annulus with 90 bbl freshwater and 10 gallons of Halliburton anhib but had too much air in system to get test. Schedule for Monday
1261157801 2017-06-20 Salt Water Injection Well No Violations Inspection revealed there was no activity at the site today.
1271756730 2016-06-02 Salt Water Injection Well No Violations The tubing of this salt water disposal well was on vacuum and the annulus was carrying a positive pressure of 155 psig. There is still apparently a small leak in thewell head or fittings as the pressure has dropped since the last inspection. There were no problems noted at the well or facility at the time of the inspection. There were no trucks at the facility at the time of the inspection.
1294330987 2010-09-08 Salt Water Injection Well No Violations Arrive to witness packer and tubing go in hole . Ran Baker Lockset with tailpipe of 30.15 ft below packer. Aove packer and between 2 3/8 tubing is a seating nipple and a back off tool. Collar is at 6126 ft . Setting range is 6030 ft to 6130 ft . Top perf is 6130 ft. Try and stay at 6120 ft to set packer. Return later to set packer and during set , packer dropped off and now needs to be fished out.
1306158339 2011-03-30 Salt Water Injection Well No Violations Injection pump has not been connected at this time. It is here, and could be it just has not been yet.
1311168334 2011-07-20 Salt Water Injection Well No Violations Facility: No problems noted. Well: No problems noted. Both tubing and annulas on vacuum
1316775748 2015-10-14 Salt Water Injection Well No Violations At the time of the inspection, the tubing had no pressure and the annulus had 200 psig. There were no problems noted at either the well or the tank facility.
1320143119 2011-10-31 Salt Water Injection Well No Violations No problems noted at tank battery. Annulus on slight vacuum. Tubing on vacuum. Will request that annlus be tested and that pressure be kept on annulus.
1320319501 2011-11-02 Salt Water Injection Well Violations Noted There is vaccum on the annulus. It took 35 barrelss to fill backside. Pressured up to 330 PSI and dropped off 50 PSI in 2 minutes. Bled off pressure and repressured to 400 PSI. Dropped 50 PSI in 2 minutes. Shut well in and called the operator who called off all brine haulers.
1321530583 2011-11-16 Salt Water Injection Well No Violations Ran 188 joints of new 2.375 EUE tubing to 6021.7 and shut down for the night.
1321547365 2011-11-17 Salt Water Injection Well No Violations Spaced out tubing and sat back on the packer. Filled the annulus with inhibited fresh water. Waited, hoping all the air would bleed out of the annulus so we could test it but finally shut down for the day leaving the annulus open to the tank until so the air could bleed out over night. Will pressure test the annulus in the morning.
1321877954 2011-11-18 Salt Water Injection Well No Violations Tested annulus to 1445 PSI for 15 minutes with no drop in pressure. Left 400 PSI on annulus. Hooked up tubing and started back to injecting.
1324382086 2011-12-19 Salt Water Injection Well No Violations Pressured up annulus to 390 PSI. Pressured right up and the packer is holding. The tubing head was leaking and it was tightened with a hammer. Operator will get sledge and try to tighten it more. Will re-test in 3 months.
1327497226 2012-01-25 Salt Water Injection Well No Violations Well was on vacuum. Annulus 0 psig. No problems noted at well or tank facility. Well was not in operation at time of inspection.
1333548565 2012-04-03 Salt Water Injection Well No Violations No problems noted. The operator is mowing the grass around the facility. There is pressure on the annulus and the well is on vacuum.
1341570385 2012-07-05 Salt Water Injection Well No Violations The oil from the spill inside the concrete containment has been cleaned up and steamed off.
1343605845 2013-05-01 Salt Water Injection Well No Violations The pressure on the annulus was 320 psig. The annulus was pressured up to 540 psig and held for 15 minutes with a loss of only 4 psig. The test passed. The pressure was left on the annulus.
1353777039 2012-11-23 Salt Water Injection Well No Violations Inspection revealed that unloading pad area was clean and tank area also and it was noted that annulus of tubing was on vacuum and tubing was on vacuum as well contacted owner and requested that pressure be applied to annulus to verify that they have integrity on tubing and packer as soon as possible.
1354622624 2012-12-03 Salt Water Injection Well No Violations On location to check the annulus pressure after leaving 365 psig on it on 11/29/12 after a successful pressure test. Found the annulus on vacuum. Contacted the operator and Dave Ball the UIC inspector for this area and turned it over to him.
1354988032 2012-12-07 Salt Water Injection Well No Violations On site along with Jim Hawkins to witness pressure test on annulus of tubing they applied 340 psi on backside of tubing and we monitored pressure for 15 minutes with no decline will check pressure again on 12/9 to confirm that we still have integrity of casing if not operator will get service rig lined up to work on well.
1355074630 2012-12-09 Salt Water Injection Well No Violations Inspected well to verify casing integrity and found annulus of tubing on vacuum called and discussed well with owner Jim Hawkins and he stated that he would get service rig lined up to work on well.
1363256174 2013-03-13 Work Over Reconditioning No Violations The new tubing arrived and was unloaded. The repair seals for the on-off tool will arrive later in the day. There will be no other activity this date.
1363297386 2013-03-14 Salt Water Injection Well No Violations On site to witness service rig crew change out tubing string and on/off tool that attaches to packer, they ran 6120 of 2.375 tubing and well flushed annulus with fresh water and inhibitor and we will pressure test tomorrow once all of the air is worked out of the fluid.
1363379181 2013-03-15 Salt Water Injection Well No Violations On site along with Todd Miller to witness well owner perform pressure test on annulus of tubing they placed 64 bbl fresh water and 5 gal inhibitor on annulus of tubing and they applied 1445 psi and we monitored pressure for 15 minutes with no decline in pressure. Owner replaced tubing and had on/off tool rebuilt it appeared that seal assembly in tool had failed and that is why they replaced tubing and seal assembly.
1363603912 2013-03-14 Salt Water Injection Well No Violations The service rig ran 6122 of 2-3/8 EUE N-80 tubing. J Hawk displaced the inhibited fresh water into the annulus, the rig stung into the packer, pulled 4000 over string weight and shut the well in for the night.
1364467740 2013-03-27 Salt Water Injection Well No Violations The pressure on the annulus is 10psig. After a discussion with Dave Ball the UIC inspector for this region, the operator was contacted and told to pressure up on the annulus on a monthly basis until further notice.
1369159609 2013-05-21 Salt Water Injection Well No Violations The annulus pressure was 260 psig. The tubing was on vacuum. There were no problems noted at the well or the tank facility at the time of the inspection.
1369799311 2014-12-15 Salt Water Injection Well No Violations Inspection revealed that well is in operation and it was noted that well s still on vacuum and injection pump has yet needed to be started.
1370515932 2013-06-05 Salt Water Injection Well No Violations The annulus pressure was 260 psig. The annulus was pressure tested to 510 psig for 15minutes with no drop off. The pressure was left on the casing. The tubing was on vacuum. There were no problems noted at the time of the inspection.
1376390527 2013-08-12 Salt Water Injection Well No Violations
1389873698 2014-01-15 Salt Water Injection Well No Violations Pressure tested annulus to 1120 psig for 15 minutes with no drop off. Left pressure on annulus. Gauge side of the annulus is frozen off. There were no problems noted at the time of the test.
1397731624 2014-04-16 Salt Water Injection Well No Violations The information on acid the job of 4/15/2014 was picked up.
1400583737 2014-05-19 Salt Water Injection Well No Violations This is a salt water injection well. The tubing was on vacuum and the annulus had 360 psig. There were no problems noted at the time of the inspection at either the tank facility or the well.
1404900960 2014-07-07 Salt Water Injection Well No Violations The toubing was static and the annulus had 40 psig. There were no problems noted at either the well or the tank facility the time of the inspection.
1408739598 2014-08-22 Salt Water Injection Well No Violations Inspection revealed that injection pump was not in operation during my inspection and it was noted that the filter system has been hooked up since my last inspection and there was a company worker on site changing filters and mowing the lawn around the facility.
1415104319 2014-11-03 Salt Water Injection Well No Violations The tubing was static and the annulus had 270 psig. The operator was cleaning filters so the well was not in operation at the time of the inspection. There were no problems noted at the time of the inspection.
1433715336 2014-09-30 Salt Water Injection Well No Violations The annulus had 10 psig on it and the tubing was on vacuum. There were no problems noted at the time of the inspection.
1443607107 2014-04-11 Salt Water Injection Well No Violations The flowline appears to be plugged. The operator is working to clear the line. There were no other problems noted at the time of the inspection.
1462822948 2016-05-09 Salt Water Injection Well No Violations Inspection revealed that injection pump was not in operation during my inspection and it was noted that annulus pressure has reached zero called and talked to company rep Bill Grimm about getting positive pressure applied to it and he stated he would have it done this week.
1462970097 2016-05-10 Salt Water Injection Well No Violations Hooked up a high pressure pump truck to the annulus and pressured up the annulus to 310 psig. The tubing head started leaking and the gauge was dripping at the threads. Shut the annulus in and removed and taped the gauge. Used a hammer to tighten up the tubing head. Put the gauge back on and opened the annulus valve and tested at 306 psig for 15 minutes with no drop in pressure, a successful test. Shut the well in and removed the gauge and high pressure hose leaving the 306 psig on the annulus. The tubing was on vacuum. There were no problems noted at the well or tank facility at the time of the inspection.
1478257050 2016-11-03 Salt Water Injection Well No Violations The facility has no issues and the ID is visible and in good repair. The well ID is visible. The annulus had 2 psig on it and the tubing was on vacuum. There were no trucks unloading at the time of the inspection.
148846261 2012-12-3 0:00: SW No Violations
1494012931 2017-05-03 Salt Water Injection Well No Violations Inspection revealed that injection pump was not in operation today and it appears that well is not being used much at this time.
1499697384 2017-07-07 Salt Water Injection Well No Violations The facility is in good repair and the ID is visible and in good repair. The well is on vacuum and the annulus has 12 psig pressure. I have been waiting for a call from the operator to put more pressure on the annulus. There were no trucks at the facility at the time of the inspection.
1512495166 2017-12-03 Salt Water Injection Well No Violations Inspection revealed that injection pump was not in operation during my inspection.

Note: One JHAWK vacuum truck was offloading during my inspection.

1569853261 2014-03-25 Salt Water Injection Well No Violations There was 140 psig on the annulus and the tubing was on vacuum. There were no problems noted at the time of the inspecion.
1574023899 2014-02-19 Production Wells No Violations Annulus pressure 180 psig. Tubing was on vacuum. There were no problems noted at the well or tank facility at the time of the inspection.
1629220186 2013-12-04 Salt Water Injection Well No Violations Inspection revealed that injection pump was not in operation today and it was noted that one Jayhawk Water Service vacuum truck was unloading at facility during my inspection.
1634793310 2012-11-29 Salt Water Injection Well No Violations On location to test the annulus. The annulus was tested to 375 psig for 15 minutes. The pressure dropped 10 psig in the time interval to 365 psig. Since this pressure drop was < the 18 psi allowed, the test passed. Tubing was on vacuum during the test.
1653428008 2015-06-23 Salt Water Injection Well No Violations Pressured up to 300 psig on annulus as all pressure had leaked off. Pressure held. Left the 300 psig on the annulus. Tubing on vacuum. No problems noted at the time of the inspection.
1714167064 2019-11-13 0:00 SW No Violations
1740865350 2011-08-09 Salt Water Injection Well No Violations Pumpjack on location but not hooked up at this time.
1743004951 2011-12-13 Salt Water Injection Well No Violations No problems noted. Annulus pressure at 0 PSI (not on vacuum). Tubing was on vacuum.
1759012944 2017-08-01 Salt Water Injection Well No Violations Inspection today indicated that injection pump was not in operation during my inspection.
1760619700 2010-09-20 Salt Water Injection Well No Violations Arrive to test M.I. And after 5 tests found too much air in system. Schedule test for Tuesday.
1797322068 2018-05-24 Salt Water Injection Well No Violations Inspection today indicated that injection pump was not in operation and one J-Hawk vacuum truck was on site today.
1804604766 2017-01-18 Salt Water Injection Well No Violations Pump not in operation at the site today but it was noted that one JAYHAWK vacuum truck was unloading at the facility during my inspection.
1806993767 2016-07-07 Salt Water Injection Well No Violations Inspection revealed that injection pump was not in operation during my inspection.
1818422436 2013-06-26 Salt Water Injection Well No Violations Injection pump not in operation and well is on vacuum ID is posted at tanks and at wellhead owner does not use well much.
1849500111 2012-11-28 Salt Water Injection Well No Violations Attempted to pressure up on the annnulus between the tubing and casing. The annulus took approximately 12 bbls of water to fill up. We could not get a test. We will let it sit over night to let trapped air migrate to the surface and try again.
1878830173 2010-09-21 Salt Water Injection Well No Violations Arrive to test annulus and found that well was at 1200 psi and test held for 15 minutes. Contact operator and advise of injection limit.
1916164202 2015-05-11 Salt Water Injection Well No Violations The annulus was at 20 psig and the tubing was on vacuum. Ther e were no problems noted at the time of the inspection.
1952410599 2015-07-16 Salt Water Injection Well No Violations Inspection revealed that well is gravity fed only at this time there is a new pump and filter skid within dike area but it has not been run since well went into operation.

Dike measurements are as follows 58.7x48x30 dike height walls=1262 bbl. Capacity.

2020576605 2018-10-09 Salt Water Injection Well No Violations On site today to witness mini test on annulus of tubing, HAWK Water Services operator Bill Grimm applied 500 psi and monitored pressure for 15 minutes with no decline in pressure.
2042302169 2010-11-16 Salt Water Injection Well No Violations No pump set yet but tanks are being filled. Injection line needs tested before injection can begin.
2073429525 2018-02-01 Salt Water Injection Well No Violations Inspection revealed that injection pump was in operation during my inspection.

Note: Called owner and requested that they change out 2 valve on annulus of tubing due to bad seal on valve and once changed contact me so they can perform mini test on annulus of tubing.

2101194897 2014-04-14 Salt Water Injection Well No Violations The flowline was not plugged nor was the dump valve from the tank. It is suspeced that the well is no longer taking water 0n as much of a vacuum as it was previously. An acid job has been scheduled for 4/15/2014.
2129074027 2013-04-12 Salt Water Injection Well No Violations The pressure on the annulus is 288 psig. The tubing is on vacuum. There were no problems noted at the time of the inspection.
2134621629 2016-03-29 Salt Water Injection Well No Violations This is a salt water injection well/facility. There were no problems noted at the time of the inspection. The tubing pressure was 0 psig and the annulus had 5 psig of positive pressure.
225661883 2011-4-12 0:00: SW No Violations 2.00
269110839 2011-1-5 0:00:0 SW No Violations 2.00
313292440 2013-4-1 0:00:0 SW No Violations
325316019 2011-9-8 0:00:0 FR No Violations
347530352 2015-2-20 0:00: SW No Violations
459129126 2012-5-13 0:00: SW No Violations 2.00
467339154 2016-8-15 0:00: SW No Violations
496515259 2015-11-9 0:00: SW No Violations
6576346 2012-6-11 0:00: SW No Violations
691014118 2018-8-29 0:00: SW No Violations
708172195 2010-9-13 0:00: SW No Violations 2.00
730096753 2010-10-18 0:00 SW No Violations 1.50
923958969 2016-1-28 0:00: SW No Violations
9302 PL No Violations
9303 PL No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
1320319501 US-OH-109159 2011-11-03 Failure to pass required test
1320319501 US-OH-109160 2011-11-03 Mechanical failure/contamination

For data sources see[9]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "Risk Based Data Management System - tblStimulation Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  5. ↑ "Risk Based Data Management System - Production Table - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  6. ↑ "Combined Production - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  7. ↑ "Risk Based Data Management System - Production Table - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  8. ↑ "Combined Production - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  9. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://wellwiki-prod.cloud.arc.gwu.edu/index.php?title=34-075-25019&oldid=14246611"