If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.
powered by ChangeDetection
| Well ID: 34-087-20415 | Loading map...
{"type":"SATELLITE","minzoom":false,"maxzoom":false,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"mappingservice":"googlemaps3","width":"100%","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"wmsoverlay":false,"copycoords":false,"static":false,"zoom":14,"layers":[],"controls":["pan","zoom","type","scale","streetview","rotate"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"resizable":false,"kmlrezoom":false,"poi":true,"markercluster":false,"clustergridsize":60,"clustermaxzoom":20,"clusterzoomonclick":true,"clusteraveragecenter":true,"clusterminsize":2,"imageoverlays":[],"kml":[],"gkml":[],"searchmarkers":"","enablefullscreen":false,"scrollwheelzoom":false,"locations":[{"text":"","title":"","link":"","lat":38.63,"lon":-82.44,"icon":""}]} |
| Country: United States | |
| State: Ohio | |
| County: Lawrence | |
| Municipality: Mason Township | |
| Operator Name: PILLAR ENERGY LLC | |
| Well Pad ID: | |
| Farm/Lease Name: PINKERMAN EDWARD | |
| License Status: Active Injection | |
| License Date: 1992-10-19 | |
| Spud Date: 1987-08-20 | |
| Spud Drilling Contractor: GARD DRILLING | |
| Final Drill Date: 1987-09-04 | |
| Well Total Depth: 650.00 ft | |
| Configuration: Vertical | |
| Latitude: 38.630000 | |
| Longitude: -82.440000 |
For data sources see[1]
| Well Status | Well Status Date | Comment |
|---|---|---|
| Original Spud | 1987-08-20 | CONVERT 10-24-92 PERMIT EXPIRED. |
| Completed | 1987-09-04 | CONVERT 10-24-92 PERMIT EXPIRED. |
| First Injection | 1987-09-04 | CONVERT 10-24-92 PERMIT EXPIRED. |
| Reached Total Depth | 1987-09-04 | CONVERT 10-24-92 PERMIT EXPIRED. |
| Completion Report Received | 1987-09-18 | CONVERT 10-24-92 PERMIT EXPIRED. |
| CO | 1992-10-19 | 1089 MITCHELL ENERGY CORP GeoDate 10/19/92 |
| Enhanced Recovery | 1992-10-19 | Issued Date 10/19/92 Expired Date 10/19/93 Acres 0001000 Tool Type NT Proposed Formation COW RUN Proposed Depth Proposed Drill Depth |
| Construction Permit Expires | 1993-10-19 | CONVERT 10-24-92 PERMIT EXPIRED. |
| Change of Owner | 1999-10-22 | Operator changed from 1089, MITCHELL ENERGY CORP to 3793, ENERGY SEARCH INC |
| Last Compliance Report | 2000-02-18 | CONVERT 10-24-92 PERMIT EXPIRED. |
| Change of Owner | 2008-02-26 | Operator changed from 3793, ENERGY SEARCH INC to 1388, NORTH COAST ENERGY INC |
| Change of Owner | 2009-12-14 | Operator changed from 1388, EXCO - NORTH COAST ENERGY INC to 7578, ENERVEST OPERATING LLC |
| Change of Owner | 2016-02-24 | Operator changed from 7578, ENERVEST OPERATING LLC to 9619, PILLAR ENERGY LLC |
| Record Last Modified | 2017-02-15 | CONVERT 10-24-92 PERMIT EXPIRED. |
For data sources see[2]
| Perforation Date | Interval Top (ft) | Interval Base (ft) | Number of Shots |
|---|---|---|---|
| 2000-02-18 | 567 | 589 | 1 |
| 567 | 589 | 1 | |
| 567 | 589 | 1 |
For data sources see[3]
| Stimulation Date | Chemical Agent | Chemical Agent Concentration (%) | Fracking Fluid Volume | Mass of Proppant Used (lb) | Fracking Company | Comments |
|---|---|---|---|---|---|---|
| H2O | 0 | 164 Bbl | 0 | AND FRAC WITH 9000# 20/40 OTTAWA SAND | ||
| Not Treated | 0 | 164 Bbl | 9000 |
For data sources see[4]
| Period | Operator Name | Gas Quantity (mcf) | Oil Quantity (bbl) | Production Days |
|---|---|---|---|---|
| 1987 | MITCHELL ENERGY CORP | 0.00 | 1093.00 | 102 |
| 1988 | MITCHELL ENERGY CORP | 0.00 | 3130.00 | 358 |
| 1989 | MITCHELL ENERGY CORP | 0.00 | 1770.00 | 357 |
| 1990 | MITCHELL ENERGY CORP | 12.00 | 1134.00 | 365 |
| 1991 | MITCHELL ENERGY CORP | 12.00 | 706.00 | 364 |
| 1992 | MITCHELL ENERGY CORP | 12.00 | 512.00 | 365 |
| 1993 | MITCHELL ENERGY CORP | 7.00 | 674.00 | 221 |
| 1994 | MITCHELL ENERGY CORP | 0.00 | 0.00 | 365 |
| 1995 | MITCHELL ENERGY CORP | 0.00 | 0.00 | 0 |
| 1997 | MITCHELL ENERGY CORP | 0.00 | 0.00 | 0 |
| 1998 | MITCHELL ENERGY CORP | 0.00 | 0.00 | 0 |
| 1999 | ENERGY SEARCH INC | 0.00 | 0.00 | 60 |
| 2000 | ENERGY SEARCH INC | 0.00 | 0.00 | 365 |
| 2008 | EXCO - NORTH COAST ENERGY INC | 0.00 | 0.00 | 366 |
| 2009 | EXCO - NORTH COAST ENERGY INC | 0.00 | 0.00 | 0 |
| 2010 | ENERVEST OPERATING LLC | 0.00 | 0.00 | 0 |
| 2011 | ENERVEST OPERATING LLC | 0.00 | 0.00 | 0 |
| Period | Operator Name | Waste Type | Quantity (bbl) | Production Days |
|---|---|---|---|---|
| 1987 | MITCHELL ENERGY CORP | Brine | 17 | 102 |
| 1988 | MITCHELL ENERGY CORP | Brine | 52 | 358 |
| 1989 | MITCHELL ENERGY CORP | Brine | 88 | 357 |
| 1990 | MITCHELL ENERGY CORP | Brine | 169 | 365 |
| 1991 | MITCHELL ENERGY CORP | Brine | 321 | 364 |
| 1992 | MITCHELL ENERGY CORP | Brine | 289 | 365 |
| 1993 | MITCHELL ENERGY CORP | Brine | 33 | 221 |
| 1994 | MITCHELL ENERGY CORP | Brine | 0 | 365 |
| 1995 | MITCHELL ENERGY CORP | Brine | 0 | 0 |
| 1997 | MITCHELL ENERGY CORP | Brine | 0 | 0 |
| 1998 | MITCHELL ENERGY CORP | Brine | ||
| 1999 | MITCHELL ENERGY CORP | Brine | ||
| 2000 | ENERGY SEARCH INC | Brine | 365 | |
| 2008 | EXCO - NORTH COAST ENERGY INC | Brine | 0 | 366 |
| 2009 | EXCO - NORTH COAST ENERGY INC | Brine | 0 | 0 |
| 2010 | ENERVEST OPERATING LLC | Brine | 0 | 0 |
| 2011 | ENERVEST OPERATING LLC | Brine | 0 |
| Inspection ID | Inspection Date | Inspection Type | Inspection Result | Inspection Comments |
|---|---|---|---|---|
| -1055964232 | 2004-5-20 0:00: | SW | No Violations | |
| -1063207352 | 2019-7-22 0:00: | ER | No Violations | 7.00 |
| -1103583242 | 2012-10-3 0:00: | ER | No Violations | 0.50 |
| -1107192579 | 2013-9-5 0:00:0 | ER | No Violations | 0.50 |
| -1212645708 | 2012-10-3 0:00: | ER | No Violations | 0.50 |
| -1241287589 | 2006-8-15 0:00: | ER | No Violations | |
| -1254845905 | 2007-4-4 0:00:0 | ER | No Violations | |
| -129002841 | 2004-1-28 0:00: | SW | No Violations | |
| -1313965395 | 2005-11-10 0:00 | ER | No Violations | |
| -1350265826 | 2014-2-13 0:00: | ER | No Violations | 0.50 |
| -1377128372 | 2013-1-7 0:00:0 | SC | No Violations | 2.50 |
| -138931752 | 2009-11-17 0:00 | ER | No Violations | |
| -1422519016 | 2009-8-17 0:00: | ER | No Violations | |
| -1456020105 | 2004-11-8 0:00: | SW | No Violations | |
| -1468354552 | 2018-6-19 0:00: | ER | No Violations | 1.50 |
| -1492106846 | 2020-1-30 0:00: | ER | No Violations | 1.00 |
| -1660692155 | 2019-9-13 0:00: | ER | No Violations | 1.10 |
| -1666722774 | 2008-1-16 0:00: | ER | No Violations | |
| -1667966465 | 2016-11-9 0:00: | ER | No Violations | 0.70 |
| -168725414 | 2004-3-4 0:00:0 | SW | No Violations | |
| -1715787628 | 2005-9-14 0:00: | ER | No Violations | |
| -1732214384 | 2020-7-14 0:00: | ER | No Violations | 0.50 |
| -1788206112 | 2007-5-31 0:00: | ER | No Violations | |
| -1815245062 | 2008-6-12 0:00: | ER | No Violations | |
| -1819077889 | 2005-4-27 0:00: | ER | No Violations | |
| -1847269455 | 2019-2-15 0:00: | ER | No Violations | 2.00 |
| -1894046867 | 2013-12-11 0:00 | SC | No Violations | 2.00 |
| -1983123084 | 2019-4-11 0:00: | ER | No Violations | 0.50 |
| -2002084685 | 2019-10-21 0:00 | ER | No Violations | 1.00 |
| -2012289008 | 2004-10-28 0:00 | SW | No Violations | |
| -2069512162 | 2019-2-19 0:00: | ER | No Violations | 1.00 |
| -2082901944 | 2018-12-10 0:00 | ER | No Violations | 3.00 |
| -2083141366 | 2019-7-18 0:00: | ER | No Violations | 1.50 |
| -386600282 | 2013-3-14 0:00: | ER | No Violations | 0.50 |
| -446187603 | 2013-1-9 0:00:0 | SC | No Violations | 0.50 |
| -497262393 | 2016-6-8 0:00:0 | ER | No Violations | 0.70 |
| -500465223 | 2014-11-20 0:00 | ER | No Violations | 0.50 |
| -530905851 | 2018-7-31 0:00: | ER | No Violations | 2.00 |
| -554539508 | 2018-10-22 0:00 | ER | No Violations | 0.50 |
| -643973128 | 2006-3-20 0:00: | ER | No Violations | |
| -65893095 | 2012-4-5 0:00:0 | ER | No Violations | 0.50 |
| -684187267 | 2010-6-18 0:00: | ER | No Violations | 1.00 |
| -717388510 | 2003-5-15 0:00: | ER | No Violations | |
| -795282004 | 2007-1-25 0:00: | ER | No Violations | |
| -810710969 | 2003-2-6 0:00:0 | ER | No Violations | |
| -859984616 | 2019-1-4 0:00:0 | ER | No Violations | 1.40 |
| -870057236 | 2011-12-9 0:00: | ER | No Violations | 0.30 |
| -892561018 | 2008-9-25 0:00: | ER | No Violations | |
| -953126794 | 2002-10-22 0:00 | ER | No Violations | |
| 000PL14091 | Preliminary Restoration | No Violations | Preliminary Restoration done information from Data Point | |
| 001269i765 | 2002-02-13 | Enhanced Recovery Project | No Violations | Follow-up on NOV, In-Compliance. |
| 0037134802 | 2016-01-07 | Enhanced Recovery Project | No Violations | Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification posted at the well. |
| 0065893095 | 2012-04-05 | Enhanced Recovery Project | No Violations | No violations at the time of inspection. |
| 0074639703 | 2003-05-15 | Enhanced Recovery Project | Violations Noted | FOLLOW UP TO NOV # 427749625 Injection pressure was measured at 248 psi, which is 76 psi over the maximum allowable injection pressure.
The injection pressure needs lowered and maintained below the maximum pressure of 172 psi. |
| 0129002841 | 2004-01-28 | Salt Water Injection Well | No Violations | |
| 0138931752 | 2009-11-17 | Enhanced Recovery Project | No Violations | Good Identification. No violations observed during inspection. |
| 0148472671 | 2002-10-22 | Enhanced Recovery Project | No Violations | An inspection of the well revealed the injection pressure is over the max. allowed, max. pressure is 172 lbs and the pressure at time of inspection was 178 lbs. Company needs to get pressure down to or below max. pressure. |
| 0168725414 | 2004-03-04 | Salt Water Injection Well | No Violations | Slightly over range - will recheck in a week. |
| 0285617642 | 2003-03-27 | Enhanced Recovery Project | Violations Noted | Valve at the gauge is covered with insulation and duct tape. Can not measure injection pressure.
Notified Tim Ross. |
| 0316458889 | 2008-07-17 | Enhanced Recovery Project | No Violations | Good Identification. No violations at this time. |
| 0386600282 | 2013-03-14 | Enhanced Recovery Project | No Violations | Jon Scott and I conducted the bimonthly inspection for this ERP field. We split up to cover more ground and try to complete this inspection in a timely manor. Wellhead identification sign is in good shape. Pipe and wellhead wrapped with silver coated insulation. |
| 0394034604 | 2009-02-26 | Enhanced Recovery Project | No Violations | Good id. No violations observed during inspection. |
| 0427749625 | 2003-05-15 | Enhanced Recovery Project | Violations Noted | Injection pressure was measured at 248 psi, which is 76 psi over the maximum allowable injection pressure.
The injection pressure needs lowered and maintained below the maximum pressure of 172 psi. |
| 0429944686 | 2019-04-23 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. The injection line is disconnected from the injection tubing. The injection tubing master valve is shut. The injection tubing 2 inch by 1/4 inch bushing has broken at the top of the tee. Oil has ran down the injection tubing. The stainless steel compression clamp on the injection tubing between the wellhead slips and the master valve is seeping brine. The fence around the well site has come down in the back corner. Evidence of flooding can be seen on the fence around the well. Accompanied by UIC Supervisor and UIC Geologist. Contaminated area around the well site has not been remediated. |
| 0431522748 | 2011-01-05 | Enhanced Recovery Project | No Violations | Valve on annulus is frozen. |
| 0431749064 | 2013-01-09 | Enhanced Recovery Project | No Violations | Inspected enhanced recovery well injection tubing pressure and annulus pressure. Good identification at well head. Accompanied by Morgan Button MRI 2. |
| 0446187603 | 2013-01-09 | Surface Facility Construction | No Violations | Currently constructing cement block containment wall. |
| 0477872464 | 2015-06-23 | Salt Water Injection Well | No Violations | No noted violations. |
| 0497262393 | 2016-06-08 | Enhanced Recovery Project | No Violations | Inspected the injection pressure, annulus pressure, unloading pad, containment dike, tanks, and injection pump. Ezra Schoolcraft and Bo Pinkerman are in the ERP field replacing identifications on the wells today. I talked to Ezra about the need to grade the access roads to prevent erosion. We discussed the need for controlling the runoff with diversion ditches and water bars. |
| 0500465223 | 2014-11-20 | Enhanced Recovery Project | No Violations | Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Good identification at well site. |
| 0530905851 | 2018-07-31 | Enhanced Recovery Project | No Violations | The service rig that is currently working in the field was scheduled to replace the top joint of injection tubing today. The job was canceled due to a rain event that caused flooding of the location and the access road. |
| 0554539508 | 2018-10-22 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. The injection line is disconnected from the injection tubing. The injection tubing has 64 psi. the compression clamp is located below the injection tubing master valve. The compression clamp is seeping brine out on to the wellhead slips and on to the ground. |
| 0570721254 | 2002-10-22 | Enhanced Recovery Project | Violations Noted | FOLLOW UP TO NOV # 1484 An inspection of the well revealed the injection pressure is over the max. allowed, max. pressure is 172 lbs and the pressure at time of inspection was 178 lbs. Company needs to get pressure down to or below max. pressure. |
| 0639454926 | 2013-07-15 | Enhanced Recovery Project | No Violations | Bimonthly UIC monitoring of Greasy Ridge ERP injection wells with Jon Scott. Wellhead and well identification sign are in good shape |
| 0643973128 | 2006-03-20 | Enhanced Recovery Project | No Violations | Slightly above maximum allowable; producer turned well off to drop pressure. |
| 0684187267 | 2010-06-18 | Enhanced Recovery Project | No Violations | Well id for Exco-North Coast, Needs to have Enervest information and contact phone numbers. I have talked to Jim Ross (Enervest contractor) about this needing to be changed as soon as possible. |
| 0707838267 | 2019-03-15 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. The well is disconnected from the injection line. The injection tubing is seeping brine from the hole in the injection tubing (between the wellhead slip ring and the injection tubing master valve.) The well is fenced in with barb wire and no access point to the well. Due to the fence, I was not able to install state issued pressure gauge to check the annulus pressure. The 1/4 inch fitting on the injection tubing has broken off. |
| 0716918702 | 2017-06-07 | Salt Water Injection Well | No Violations | Salt water injection well inspection. The annulus pressure was 24 PSI, the injection tubing pressure was 0 PSI. No violations noted. |
| 0717388510 | 2003-05-15 | Enhanced Recovery Project | Violations Noted | FOLLOW UP TO NOV # 427749625 Injection pressure was measured at 248 psi, which is 76 psi over the maximum allowable injection pressure.
The injection pressure needs lowered and maintained below the maximum pressure of 172 psi. |
| 0744526165 | 2007-09-25 | Enhanced Recovery Project | No Violations | No violations at this time. |
| 0768585355 | 2014-08-19 | Enhanced Recovery Project | No Violations | Inspected the unloading pad, containment dike, tanks, injection pump, walked the injection line, checked the injection pressure and annulus pressure. Good identification at wellhead. |
| 0795282004 | 2007-01-25 | Enhanced Recovery Project | No Violations | No problems at this time. |
| 0810710969 | 2003-02-06 | Enhanced Recovery Project | Violations Noted | FOLLOW UP TO NOV # 1805788874 Injection pressure measured was 3 psi over maximum. Notified operator. |
| 0859984616 | 2019-01-04 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. A barb wire enclosure has been installed around the well. The enclosure has no gate or access point. I was not able to install the state issued gauge and check pressures on the injection tubing and the annulus. The stainless steel compression clamp on the injection tubing was observed to be seeping brine. |
| 0870057236 | 2011-12-09 | Enhanced Recovery Project | No Violations | Accompanied Jon Scott for ERP training. Site clean, not exceeding max injection. |
| 0892561018 | 2008-09-25 | Enhanced Recovery Project | No Violations | Good id. No violations at this time. |
| 0921863441 | 2015-10-13 | Enhanced Recovery Project | No Violations | Inspected the containment dike, tanks, unloading pad, injection pump, injection pressure, and annulus pressure. Identification posted at the well. |
| 0929645858 | 2018-09-14 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. The injection line has been disconnected from the injection tubing with both ends plugged off. The stainless steel compression clamp is showing signs of leaking, orange stain running down to the ground. Absorbent pads have been placed on the ground recently. No contaminated soil has been removed from the location. Identification is posted. |
| 0953126794 | 2002-10-22 | Enhanced Recovery Project | Violations Noted | FOLLOW UP TO NOV # 1484 An inspection of the well revealed the injection pressure is over the max. allowed, max. pressure is 172 lbs and the pressure at time of inspection was 178 lbs. Company needs to get pressure down to or below max. pressure. |
| 0968861580 | 2003-02-06 | Enhanced Recovery Project | Violations Noted | FOLLOW UP TO NOV # 1805788874 Injection pressure measured was 3 psi over maximum. Notified operator. |
| 0984278150 | 2009-05-12 | Enhanced Recovery Project | No Violations | Good id. No violations were observed at time of inspection. |
| 1007364247 | 2013-10-21 | Enhanced Recovery Project | No Violations | Inspected the injection wells in this ERP field with Jon Scott. The sign and wellhead for this well are in good shape. No leaks were detected at this time. |
| 1055964232 | 2004-05-20 | Salt Water Injection Well | No Violations | No problem observed. |
| 1056374778 | 2003-06-19 | Enhanced Recovery Project | Violations Noted | The injection pressure measured was 273 psi, which exceeds the maximum allowable injection pressure of 172 psi.
On June 19, 2003, Tim Ross was informed of the violation and advised to immediately decrease the injection pressure below 172 psi. |
| 1103583242 | 2012-10-03 | Enhanced Recovery Project | No Violations | Inspected injection pressure and annulus pressure. Good identification on wellhead. Injection tubing has been replaced with new 1 steel. |
| 1107192579 | 2013-09-05 | Enhanced Recovery Project | No Violations | Jon Scott and I performed the bimonthly UIC inspection on the injection wells in this field. There were no leaks and the identification sign was in good shape. |
| 1135863150 | 2008-03-25 | Enhanced Recovery Project | No Violations | No violations were observed. The new pressure regulator is working well. |
| 1166681997 | 2018-09-21 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. The injection tubing is disconnected from the injection line. The stainless steel clamp on the injection tubing is seeping brine onto the wellhead. A High Range Quantab was used to test the fluid on the wellhead ring. The fluid tested at more than 6907 ppm Cl. No contaminated soil has been removed from the location. The injection tubing pressure is 60 psi. |
| 1212645708 | 2012-10-03 | Enhanced Recovery Project | No Violations | Inspected wells with Jon Scott. Measured Injection and Annulus pressure for wells in this field. Well ID was good. Injection tubing has been replaced with new 1-inch steel tubing. |
| 1228670845 | 2010-03-09 | Enhanced Recovery Project | No Violations | Good identification. No violations during inspection. |
| 1241287589 | 2006-08-15 | Enhanced Recovery Project | No Violations | Within limits. Well is shut-in regularly to keep pressure down. |
| 1254845905 | 2007-04-04 | Enhanced Recovery Project | No Violations | No problems, Jim Ross has grated the lease roads. |
| 1269i765 | 2002-2-13 0:00: | ER | No Violations | |
| 1275872734 | 2005-02-08 | Salt Water Injection Well | No Violations | OK. |
| 1275941507 | 2003-03-27 | Enhanced Recovery Project | Violations Noted | FOLLOW UP TO NOV # 285617642 Valve at the gauge is covered with insulation and duct tape. Can not measure injection pressure.
Notified Tim Ross that the system needs to be configured to allow installation of a pressure gauge. |
| 1302118286 | 2011-04-06 | Enhanced Recovery Project | No Violations | No violations at this time. |
| 1303066442 | 2013-05-03 | Enhanced Recovery Project | No Violations | Inspected injection well and measured injection pressure and annulus pressure. Well in good shape. Well identification in good shape. |
| 1313965395 | 2005-11-10 | Enhanced Recovery Project | No Violations | |
| 1350265826 | 2014-02-13 | Enhanced Recovery Project | No Violations | Bimonthly inspection of ERP field injection wells performed by me and Jon Scott. There are no noticeable leaks in plumbing at wellhead. Identification sign and wellhead in good shape. |
| 1351336757 | 2003-03-27 | Enhanced Recovery Project | No Violations | FOLLOW UP TO NOV # 285617642 Valve at the gauge is covered with insulation and duct tape. Can not measure injection pressure.
Notified Tim Ross that the system needs to be configured to allow installation of a pressure gauge. |
| 1353103879 | 2019-5-28 0:00: | ER | No Violations | 0.50 |
| 1357751422 | 2013-01-09 | Enhanced Recovery Project | No Violations | Accompanied Jon Scott to this injection well to perform bimonthly inspection and measure its annulus pressure and actual injection pressure. |
| 1377128372 | 2013-01-07 | Surface Facility Construction | No Violations | Concrete dike pad has been poured. Concrete block and mortar is on site. Extended concrete apron to unloading pad. |
| 1403281877 | 2014-06-20 | Enhanced Recovery Project | Violations Noted | Inspected injection pressure, annulus pressure and walked the pipe line right of way. Good identification at the well. Injection line manifold at the well site has a steady drip of brine. The flow meter is also dripping brine. I contacted Jim Ross and his crew shut off the line and have started to switch injection lines to a new plastic line that was run recently. |
| 1403547374 | 2014-06-23 | Enhanced Recovery Project | No Violations | Brine leaks have been fixed. Tested Injection line between #20415 and #20476. New injection line SDR 7 Plastic. Test was at 260 psi for 15 minutes with no loss. |
| 1404401426 | 2018-11-19 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. The injection line is disconnected from the injection tubing. The injection tubing has a compression clamp located above the wellhead slip ring. The compression clamp is seeping brine. The injection tubing has 70 psi. A High Range Quantab was used on the brine seeping from the clamp. The Quantab maxed out at more than 6907 ppm Cl. |
| 141629713 | 2019-7-16 0:00: | ER | No Violations | 5.50 |
| 1422519016 | 2009-08-17 | Enhanced Recovery Project | No Violations | Good identification. No violations observed during inspection. |
| 1429791411 | 2015-04-22 | Enhanced Recovery Project | No Violations | No noted violations. |
| 1456020105 | 2004-11-08 | Salt Water Injection Well | No Violations | Random pressure check |
| 1459426501 | 2016-03-29 | Enhanced Recovery Project | No Violations | Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification has not been changed from Enervest to Pillar Energy. |
| 1468354552 | 2018-06-19 | Enhanced Recovery Project | No Violations | Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification is posted at the well. The containment dike is free of fluids. The injection tubing master valve is closed. A stainless steel compression clamp has been installed on the injection tubing at the wellhead ring. |
| 148472671 | 2002-10-22 0:00 | ER | No Violations | |
| 1526499484 | 2003-10-08 | Enhanced Recovery Project | No Violations | Well is in compliance. |
| 1536086906 | 2018-09-04 | Enhanced Recovery Project | Violations Noted | UIC Quarterly inspection of the well revealed that the stainless steel compression clamp on the injection tubing is leaking brine. A scald area 5 feet by 3 feet is at the wellhead. The standing water was tested with a high range Quantab. The Quantab was maxed out at greater than 6620 ppm Cl. The top joint of injection tubing needs to be repaired or replaced. All contaminated soil must be removed and disposed of at an EPA approved landfill. |
| 1562937164 | 2019-7-9 0:00:0 | ER | No Violations | 1.50 |
| 1565350675 | 2010-09-13 | Enhanced Recovery Project | No Violations | Good identification. No violations observed. |
| 1586349636 | 2020-4-7 0:00:0 | ER | No Violations | 1.50 |
| 1642622106 | 2020-6-17 0:00: | ER | No Violations | 0.40 |
| 1666722774 | 2008-01-16 | Enhanced Recovery Project | No Violations | Pressure regulators made by Jordan Valves have been installed and are working great. The valves have a max. back pressure of 400psi, and a max. working pressure of 600psi. They are being set slightly below max. injection pressures. |
| 1667966465 | 2016-11-09 | Enhanced Recovery Project | No Violations | Inspected the containment dike, tanks, unloading pad, injection pumps, injection pressure and annulus pressure. Identification posted at the well. The containment dike is free of fluids. |
| 1694492526 | 2011-08-02 | Enhanced Recovery Project | No Violations | Good identification. No violations observed during inspection. |
| 1704739768 | 2004-08-03 | Salt Water Injection Well | No Violations | No violations |
| 1715787628 | 2005-09-14 | Enhanced Recovery Project | No Violations | OK. |
| 1715859328 | 2018-03-19 | Salt Water Injection Well | No Violations | I was on location today to check the pressures of this salt water injection well. The annulus pressure was 121psi, the injection tubing pressure was 135 psi. No violations were noted during my inspection. |
| 1769964463 | 2004-11-08 | Production Wells | No Violations | Passed. |
| 1788206112 | 2007-05-31 | Enhanced Recovery Project | No Violations | No violations at this time. |
| 1802881774 | 2016-08-19 | Enhanced Recovery Project | No Violations | Inspected the containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification posted at the well. |
| 1805788874 | 2003-02-06 | Enhanced Recovery Project | Violations Noted | Injection pressure measured was 3 psi over maximum. Notified operator. |
| 1815245062 | 2008-06-12 | Enhanced Recovery Project | No Violations | No violations at this time. |
| 1819077889 | 2005-04-27 | Enhanced Recovery Project | No Violations | Passed |
| 1819395552 | 2006-01-23 | Enhanced Recovery Project | No Violations | Pressures below maximum allowable; pressure on the annulus. |
| 1847269455 | 2019-02-15 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. Access to well is flooded. |
| 1894046867 | 2013-12-11 | Surface Facility Construction | No Violations | Inspected the changes that have been made to the pump house injection line manifolds and the change over to a different injection pump. Inspected the unloading pad, containment dike and tanks. |
| 1983123084 | 2019-04-11 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. There is a barb wire fence around the well site. The fence has been knocked down by deer. The injection line is disconnected from the injection tubing. There is oil seeping out of the injection tubing tee. The injection tubing has a stainless steel compression clamp located above the 4.5 inch wellhead slip ring and below the injection tubing master valve. The compression clamp is seeping brine on to the wellhead and on to the ground. A High Range Quantab was used to field test the brine. The high range quantab was maxed out at over 6700 ppm cl. |
| 2012289008 | 2004-10-28 | Salt Water Injection Well | No Violations | Within limits. |
| 2062197511 | 2004-04-07 | Salt Water Injection Well | No Violations | Rechecked tubing pressure because it was slightly over on last check. At 156 psi it is well below limit this time. |
| 2069512162 | 2019-02-19 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. Barb wire fence with out a gate is surrounding the well. Unable to check pressures on the well due to the fence. The stainless steel clamp on the injection tubing is seeping brine. The 2 inch by 1/4 inch bushing with the 1/4 inch valve and gauge has frozen and broke the 2 inch by 1/4 inch bushing. The broken portion is on the ground. It consists of a piece of the bushing, the 1/4 inch valve and gauge. The injection tubing master valve is closed. |
| 2081633037 | 2006-03-29 | Enhanced Recovery Project | No Violations | Within limits |
| 2082901944 | 2018-12-10 | Enhanced Recovery Project | No Violations | Compliance Notice # 1536086906 follow up inspection. The injection line is disconnected from the injection tubing. The injection tubing has a stainless steel compression clamp installed. The compression clamp is seeping brine. The site is currently being used for cattle. The well does not have a fence around it. |
| 2128949254 | 2006-11-21 | Enhanced Recovery Project | No Violations | No problems |
| 244223619 | 2019-6-12 0:00: | ER | No Violations | 1.50 |
| 285617642 | 2003-3-27 0:00: | ER | No Violations | |
| 316458889 | 2008-7-17 0:00: | ER | No Violations | |
| 37134802 | 2016-1-7 0:00:0 | ER | No Violations | 0.50 |
| 394034604 | 2009-2-26 0:00: | ER | No Violations | |
| 427749625 | 2003-5-15 0:00: | ER | No Violations | |
| 429944686 | 2019-4-23 0:00: | ER | No Violations | 0.50 |
| 431522748 | 2011-1-5 0:00:0 | ER | No Violations | |
| 431749064 | 2013-1-9 0:00:0 | ER | No Violations | 1.50 |
| 477872464 | 2015-6-23 0:00: | SW | No Violations | 0.50 |
| 570721254 | 2002-10-22 0:00 | ER | No Violations | |
| 636961713 | 2019-12-20 0:00 | ER | No Violations | 0.50 |
| 639454926 | 2013-7-15 0:00: | ER | No Violations | 0.50 |
| 707838267 | 2019-3-15 0:00: | ER | No Violations | 1.50 |
| 716918702 | 2017-6-7 0:00:0 | SW | No Violations | |
| 744526165 | 2007-9-25 0:00: | ER | No Violations | |
| 74639703 | 2003-5-15 0:00: | ER | No Violations | |
| 768585355 | 2014-8-19 0:00: | ER | No Violations | 0.70 |
| 921863441 | 2015-10-13 0:00 | ER | No Violations | 0.70 |
| 929645858 | 2018-9-14 0:00: | ER | No Violations | 1.50 |
| 968861580 | 2003-2-6 0:00:0 | ER | No Violations | |
| 984278150 | 2009-5-12 0:00: | ER | No Violations | |
| PL14091 | PL | No Violations |
| Inspection ID | Violation ID | Violation Date | Violation Code | Violation Comments |
|---|---|---|---|---|
| 0074639703 | US-OH-128486 | 2003-05-19 | Exceeding maximum allowable injection pressure | |
| 0285617642 | US-OH-122966 | 2003-04-10 | Violation of injection tubing/fitting requirements | |
| 0427749625 | US-OH-124565 | 2003-05-19 | Exceeding maximum allowable injection pressure | |
| 0570721254 | US-OH-126412 | 2002-10-22 | Exceeding maximum allowable injection pressure | |
| 0717388510 | US-OH-128148 | 2003-05-19 | Exceeding maximum allowable injection pressure | |
| 0810710969 | US-OH-129228 | 2003-02-19 | Exceeding maximum allowable injection pressure | |
| 0953126794 | US-OH-130886 | 2002-10-22 | Exceeding maximum allowable injection pressure | |
| 0968861580 | US-OH-131111 | 2003-02-19 | Exceeding maximum allowable injection pressure | |
| 1056374778 | US-OH-101041 | 2003-06-23 | Exceeding maximum allowable injection pressure | |
| 1275941507 | US-OH-107654 | 2003-04-10 | Violation of injection tubing/fitting requirements | |
| 1403281877 | US-OH-111929 | 2014-06-26 | Pollution/Contamination | |
| 1536086906 | US-OH-114794 | 2018-09-19 | 9-5-06 | Pollution/Contamination |
| 1536086906 | US-OH-114795 | 2018-09-19 | 9-5-10(J) | Well incapable of inj./production |
| 1805788874 | US-OH-118035 | 2003-02-19 | Exceeding maximum allowable injection pressure |
For data sources see[9]