X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-105-23590

Well Details

Well ID: 34-105-23590
Loading map...
Country: United States
State: Ohio
County: Meigs
Municipality: Columbia Township
Operator Name: BANCEQUITY PETROLEUM CORPORATI
Well Pad ID:
Farm/Lease Name: CHEADLE REX (SWIW #17)
License Status: Active Injection
License Date: 2009-09-23
Spud Date: 2007-01-27
Spud Drilling Contractor: WARREN DRLG
Final Drill Date: 2007-01-30
Well Total Depth: 2614.00 ft
Configuration: Vertical
Latitude: 39.150000
Longitude: -82.230000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2006-02-28 Proposed Formations:BEREA THRU CLINTON, Issued Date:2/28/2006, Expired Date:2/28/2007 6:00:00 AM, Drilling unit acres:116, Proposed Well Type:OG, Proposed Well Class:EDPW
Completed 2007-01-30 IP BASED ON REGIONAL AVERAGE
Reached Total Depth 2007-01-30 IP BASED ON REGIONAL AVERAGE
Completion Report Received 2008-02-07 IP BASED ON REGIONAL AVERAGE
APP 2009-05-06 Proposed Formations:BEREA THRU OHIO SHALE, Issued Date:5/6/2009, Expired Date:5/6/2010 6:00:00 AM, Drilling unit acres:116, Proposed Well Type:OG, Proposed Well Class:
APP 2009-09-23 Proposed Formations:BEREA THRU OHIO SHALE, Issued Date:9/23/2009, Expired Date:9/23/2010 6:00:00 AM, Drilling unit acres:116, Proposed Well Type:SWD, Proposed Well Class:SWIW
Construction Permit Expires 2010-09-23 IP BASED ON REGIONAL AVERAGE
Change of Owner 2014-02-06 Operator changed from 79, OXFORD OIL to 9216, ECLIPSE RESOURCES-OHIO LLC
Last Compliance Report 2015-02-11 IP BASED ON REGIONAL AVERAGE
Change of Owner 2016-08-02 Operator changed from 9216, ECLIPSE RESOURCES-OHIO LLC to 8685, M & R INVESTMENTS OHIO LLC
Change of Owner 2019-02-26 Operator changed from 8685, M & R INVESTMENTS OHIO LLC to 4801, BANCEQUITY PETROLEUM CORPORATION
Record Last Modified 2019-02-26 IP BASED ON REGIONAL AVERAGE

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2008-04-01 1272 1278 15
1272 1278 15
1272 1278 15

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
H2O 0 2381 Bbl 10000 BEREA PERF'D & SQUEEZED OFF WITH 20 SACKS 9/11/2009
H2O 0 2964 Bbl 30000 INJECTION ZONE FOR SWDW

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2007 OXFORD OIL 0.00 0.00 365
2008 OXFORD OIL 0.00 0.00 0
2009 OXFORD OIL 0.00 0.00 0
2010 OXFORD OIL 0.00 0.00 365
2011 OXFORD OIL 0.00 0.00 0
2012 OXFORD OIL 0.00 0.00 0

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2007 OXFORD OIL Brine 360 365
2008 OXFORD OIL Brine 0
2009 OXFORD OIL Brine 90
2010 OXFORD OIL Brine 0 365
2011 OXFORD OIL Brine 0
2012 OXFORD OIL Brine 0

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-105184313 2012-6-29 0:00: PW No Violations 1.50
-1057555302 2015-8-19 0:00: SC No Violations 2.00
-1059263910 2018-10-29 0:00 SW No Violations 1.50
-1077338218 2012-10-5 0:00: SW No Violations 1.50
-1157833495 2012-7-6 0:00:0 SW No Violations 1.50
-1222826915 2016-3-11 0:00: AM No Violations 0.50
-1357558618 2018-4-5 0:00:0 SW No Violations 3.00
-1397714783 2011-3-11 0:00: AM No Violations
-1676610215 2015-6-22 0:00: SW No Violations 2.00
-1783096815 2013-5-22 0:00: SW No Violations 2.00
-1893505383 2016-8-22 0:00: SW No Violations 2.50
-193012928 2018-3-14 0:00: SW No Violations 2.00
-1931869312 2010-9-9 0:00:0 SW No Violations 1.00
-1943412458 2016-6-23 0:00: SW No Violations 5.00
-1949294924 2009-12-9 0:00: AM No Violations
-1963204648 2011-11-3 0:00: SW No Violations
-1967935463 2009-9-11 0:00: PB No Violations
-1977065347 2015-2-11 0:00: SW No Violations 1.00
-2048571368 2016-3-16 0:00: SW No Violations 1.00
-241508510 2009-12-11 0:00 SW No Violations
-245371849 2014-12-8 0:00: SW No Violations 2.50
-257836821 2011-11-2 0:00: SW No Violations 1.00
-267100567 2012-6-25 0:00: SW No Violations 0.50
-31189254 2015-9-15 0:00: SW No Violations 1.50
-316049965 2016-3-14 0:00: PW No Violations 1.00
-361289800 2010-6-21 0:00: SW No Violations 1.50
-374755507 2019-4-29 0:00: SW No Violations 2.00
-402286783 2013-7-17 0:00: SW No Violations 0.50
-453913944 2020-2-6 0:00:0 SW No Violations 3.50
-500551102 2017-6-28 0:00: SW No Violations 2.00
-625161210 2016-3-24 0:00: SW No Violations 1.50
-639612144 2015-2-10 0:00: SW No Violations 0.50
-65769023 2013-3-1 0:00:0 SW No Violations 3.20
-669866870 2017-2-28 0:00: SW No Violations
-706051037 2014-2-26 0:00: SW No Violations 1.80
-761650373 2012-8-23 0:00: SW No Violations 1.00
-774356779 2009-10-13 0:00 SW No Violations
-913684056 2013-12-3 0:00: SW No Violations 1.00
0031189254 2015-09-15 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pressure and annulus pressure. Identification is posted at the well and containment dike. I called Eclipse and talked to Mark about the 210 barrel tank drain nipple that is corroded and dripping brine into the containment dike.
0065769023 2013-03-01 Salt Water Injection Well No Violations Witnessed with Josh Garland MRI 2 a mini test on the annulus (340 psi for 15 minutes with no loss in pressure). Annulus was topped off with 1 gallon fresh water prior to test. Dike sump pump was in operation during the inspection and removing recent rain water from the dike and pumping the water into the steel tank with-in the dike.
0105184313 2012-06-29 Production Wells No Violations Valves replaced and pressures were tested.
0191582267 2009-12-14 Salt Water Injection Well No Violations Conversion to SWIW. Pulled 2 3/8 tubing and set Halliburton R-4 packer at 1246. Filled annulus with 14 bbl fresh water and 1 gallon corrosion inhibitor. Max injection pressure 375psi. Tested Annulus with 500psi. At 5 minutes had 500psi, At 15 minutes had 500psi. Jack Green wants to release pressure and add anti freeze to annulus and retest after surface facilities are constructed.
0193012928 2018-03-14 Salt Water Injection Well No Violations My inspection revealed the salt water injection well had 0 psi on the tubing and 35 psi on the annulus. The dike had approximately 6 inches of fluid in it. I contacted well owner M&R Investments Ohio LLC to have the fluid removed from the dike. The person I contacted was Mr. Jody Jasper and I left a message to return my call at 1420 hours.
0216115976 2010-12-16 Salt Water Injection Well No Violations Good identification. Injection water is gravity fed to well. Injection tubing had zero pressure. Annulus had slight vac then zero. I called Ron Flood (Oxford) and asked when the last test was done. Ron told me November. Ron told me that he will test the annulus this month. He is waiting on better weather. I told Ron to call me when the test is scheduled. I called and informed Tom Tomastik of the issue with the annulus, Tom said for them to test the annulus. Dike and equipment looks good.
0241508510 2009-12-11 Salt Water Injection Well No Violations Conversion to SWIW. Retesting packer set at 1744. 1st test losing 100 psi every 5minutes. 2nd test losing 100 psi every 5 minutes. Will release packer and pull tubing to 1240 and test on Monday 12-14-09.
0245371849 2014-12-08 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, annulus pressure and injection pressure. Dike is free of water. Identification posted on the well and inside the containment dike on the tank stair railing.
0257836821 2011-11-02 Salt Water Injection Well No Violations Accompanied J. Scott on Mechanical Integrity Test. Annulus and injection were both on vacuum. Will return Friday to test again after they have re-pressurized annulus since this well has a history of similar behavior.
0259237257 2016-03-16 Salt Water Injection Well Violations Noted Our records indicate that the Division has not received the Salt Water Injection Well Annual Report (Form 204) that was due on February 15th for 2015, despite a letter that was sent March 1, 2016 with a deadline of March 15, 2016 to submit the reports requested. REPORTS RECEIVED
0267100567 2012-06-25 Salt Water Injection Well Violations Noted Unable to test injection pressure due to corroded fittings. Fittings shall be replaced.
0316049965 2016-03-14 Production Wells No Violations I stopped by this morning to see how the clean up was going. It was clear they had been there over the weekend and changed the oil diapers and raked around some of the oil absorb.
0361289800 2010-06-21 Salt Water Injection Well No Violations Good id on tank ladder. Tanks are painted wellhead painted. Site looks good. Well is being supplied by gravity feed from the tank to well. No pump on line.
0370359353 2016-03-23 Administrative Inspection No Violations Mark Johnson from eclipse called and said the spill was cleaned up. He said there was still some absorbant material in the dike and wanted to know if it could be left for awhile to continue to pick up what might seep out. I told him I would talk with Jon Scott and get back to him.
0374755507 2019-04-29 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pressure and annulus pressure. Identification posted. The containment dike is free of fluids. Witnessed Bancequity brine truck unloading on the pad. Reviewed brine hauling information.
0402286783 2013-07-17 Salt Water Injection Well No Violations No violations.
0436579925 2016-06-15 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection line, injection pressure and annulus pressure. The annulus had a slight vacuum then zero psi. The injection tubing master valve and injection line valve were closed. (Gravity feed system) I called and talked to Dean Harris and they will be testing the annulus next week (monthly test). The containment dike is free of water.
0487618014 2018-05-11 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pressure and annulus pressure. Identification is posted. The containment dike has 3 inches of water at the low portion of the dike.
0500551102 2017-06-28 Salt Water Injection Well No Violations Salt water injection well inspection. The well is equipped with a unloading pad, 2-210 barrel tanks and 1-100 barrel tank. There is a lined dike surrounding the tank battery. The injection tubing pressure was 88 PSI, the annulus pressure was 0 psi. Good identification posted.
0564812995 2010-01-27 Surface Facility Construction No Violations Dike is under construction. Dike walls have been constructed out of soil. No sand has been placed in dike. 2 steel tanks are on location. Pit has been filled in, and site graded.
0625161210 2016-03-24 Salt Water Injection Well No Violations The site was mostly cleaned up. There was some dry oil soak thrown down that will need removed. I will call Mark Johnson and instruct him that it is no problem to leave that in there to catch what little might be left in there but will need to be removed to have the site fully restored.
0639612144 2015-02-10 Salt Water Injection Well Violations Noted Unable to check pressures on the tubing due to corroded fittings. The annulus was check and was on vacuum. A mini test shall be administered to verify mechanical integrity. Fittings shall be equipped in order to monitor mechanical integrity.
0669866870 2017-02-28 Salt Water Injection Well No Violations Our records indicate that the Division has not received the Salt Water Injection Well disposal fees for the 2nd, 3rd, & 4th quarters of 2016. Please submit the appropriate reports by March 14, 2017. Fees and Reports received 3/27/2017
0706051037 2014-02-26 Salt Water Injection Well No Violations The injection tubing at the well is typically on vacuum and the system is gravity fed. The valve on the tubing is open and the check valve in the line could be heard rattling. My gauge did not read any pressure when I opened the needle valve. The annulus had zero pressure. Well shall be shut in until a mini MIT test is administered and mechanical integrity of the well can be verified. No violations at the unloading facility or tank battery.
0761650373 2012-08-23 Salt Water Injection Well No Violations I was unable to open the valve on the injection tubing. The annulus was on vacuum. Injection operations shall cease immediately and a mechanical integrity test shall be performed.
0768659186 2011-11-02 Salt Water Injection Well No Violations Accompanied Jon Scott and Josh Garland on inspection.
0774356779 2009-10-13 Salt Water Injection Well No Violations Conversion to SWIW. No service rig on location. 4.5 has 4.5 by 2 swedge with valve and bull plug with needle valve. Pit liner has started to fall in on one side. Water is in contact with soil. Pit is full of water. I tested the water with a high end Quantab and it tested 8 on the strip which is 5293ppm cl. Frac tanks are on location. I called Jack Green (Oxford Oil) he is going to have the pit pumped out tomorrow. Jack told me that they are going to frac this well to see if they can make it into a production well.
0791753534 2019-01-29 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pressure and annulus pressure. Identification is posted. The containment dike has approximately 4 inches of ice in it.
0843430314 2016-01-27 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection line, injection pressure and annulus pressure. The 2 ball valve on the annulus has frozen and split the valve housing. The containment dike has approximately 6 of snow and ice in the low portion of the dike. I called Mark Johnson about the annulus valve and the ice in the containment dike. Mark said they will replace the valve and pressure up the annulus. He will attempt to remove the ice as soon as it melts.
0864294764 2009-09-09 Preliminary Restoration No Violations Good vegetative cover. Permitting to convert to SWIW. Preliminary restoration passed.
0913684056 2013-12-03 Salt Water Injection Well No Violations No noted violations.
0935249260 2011-07-22 Salt Water Injection Well No Violations Good Id. Oxford water truck was unloading on the pad during inspection. No violations observed during inspection.
1053355109 2019-11-5 0:00: SW No Violations 2.00
1057555302 2015-08-19 Surface Facility Construction No Violations Accompanied UIC Geologist on inspection of the containment dike. Containment dike was measured and tank connections were recorded.
1059263910 2018-10-29 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pressure and annulus pressure. Identification is posted. The containment dike has 3 inches of water in the low portion of the dike. I called Dean Harris and left a voice message to pump out the containment dike water. The injection tubing has 210 psi gas pressure. This facility is gravity feed and the tank drain line valves are closed.
1061653356 2015-10-23 Salt Water Injection Well No Violations No noted violations.
1077338218 2012-10-05 Salt Water Injection Well No Violations Witnessed Mechanical Integrity Test performed by company as regular maintenance. 395 psi was held on the annular space for 15 minutes with no loss in pressure.
1105286647 2013-02-27 Salt Water Injection Well Violations Noted Truck delivery at time of inspection. Oxford Oil UIC-22. Manifest states salt water is from Radekin and Wooten leases. At the time of inspection the annulus was on zero and the injection tubing was on vacuum. Mechanical integrity is still present but a mini test shall be administered. Injection lines shall be closed until mechanical integrity test is passed.
1151527078 2010-03-04 Surface Facility Construction No Violations Tanks are in dike. 2-210 bbl and 1-100 bbl steel tanks. Good identification in dike attached to ladder. A test today to see if the tanks will gravity feed to the injection well or if they need a pump installed. Gravity feed was successful. Still a possibility of a need for pump in future, if demands on well cannot keep up with gravity flow rate. Concrete loading pad has not been constructed yet.
1157833495 2012-07-06 Salt Water Injection Well No Violations Mechanical integrity mini test administered. 350 psi held on the surface annular space for 15 minutes with no loss in pressure.
1222826915 2016-03-11 Administrative Inspection No Violations Mark Johnson from Eclipse called my cell about 5pm to report a release of oil from a tank being over ran. He estimated it to be 5bbls. I called Jon Scott and let him know then traveled to the release.
1252516822 2009-09-09 Surface Facility Construction No Violations Inspection request due to application to convert PR well to SWIW. Site inspection revealed a Pond located at GPS 39.15910 /W082.23950. Well # 3590 is 203 feet from the pond. Pond is up slope from the proposed injection well site. Water Well #1 Located at GPS N39.15958/W082.23907 is 344 feet from Well # 3590. Water Well # 2 Located at GPS N39.16030/W082.23885 is 616 feet from Well # 3590. Water well locations and information provided by Rex Cheadle (landowner) and field verified during inspection. Water well #1 Drilled last year for livestock use is approximately 180 deep. Water well # 2 is for domestic house use, age unknown. Depth 150-175. New pump set at 150 feet.
1262006917 2009-12-10 Salt Water Injection Well No Violations Conversion to SWIW. Timco Service rig, Cemenco Pump truck, Oxford Oil water truck. Rebuilt Halliburton R-4 Packer . Jack Green (Oxford Oil) requested a change in packer depth from 1240 to 1750. I called Tom Tomastik UIC Geologist and received permission to set packer deeper than permit. The new test pressure is 525psi. Tom stated that if the test did not pass then the packer should be moved to 1240 with test pressure of 375psi, as specified on the permit. Pumped 16 bbl fresh water mixed with 2.5 gallons corrosion inhibiter. 2 3/8 tubing tally at 1775. Tested 3 times at 1775 was unable to get a good test. 1st lost 25psi a minute. 2nd test lost 220 psi in 11 minutes. 3rd test lost 50 psi in 4 minutes. Packer was released and 1 joint tubing was pulled. New depth of packer 1744. 1st test at 1744 lost 300psi in 15 minutes. Will retest in morning after air bubbles have a chance to escape.
1265205900 2010-02-02 Surface Facility Construction No Violations SWIW dike construction. Dike is lined with 4 of sand. Installed a 30 mil liner in dike. Covered 30 mil liner with protective fabric. Plan on placing sand on end of dike with sump then washed gravel in remainder of dike. Plan on installing two 210bbl tanks (on location) and one 100bbl tank (not on location).
1265376881 2010-02-03 Surface Facility Construction No Violations Sand has been installed over liner cover. Sand has been placed over the dike sides and top. Steel sump with slotted steel casing drain has been installed in dike. Back filling around sump with washed gravel.
1284132065 2010-09-10 Salt Water Injection Well No Violations Timco rig on well pulled tubing and packer 14000 total (12000 over string weight) Added 30 gallons fresh water to annulus and tested annulus at 398psi. After 5 minutes pressure at 398psi at 15 minutes pressure at 398psi. Good test.
1341496957 2012-07-05 Salt Water Injection Well Violations Noted The annulus and the injection tubing were both on vacuum. A mini test will be performed to prove integrity.
1341852761 2012-07-06 Salt Water Injection Well No Violations Mini test on annulus. Test at 350 psi for 15 minutes. No loss in pressure after 15 minutes. Accompanied Josh Garland MRI 2.
1351683607 2012-08-24 Salt Water Injection Well No Violations I met the field supervisor at the well to perform a mini test to prove mechanical integrity. The annular space was pressurized to 390 psi and lost no pressure over the 15 minute test period.
1357558618 2018-04-05 Salt Water Injection Well No Violations My inspection revealed the salt water injection well had approximately 14 inches of water in the dike. The unloading pad was also full of water. I checked the water in the dike using low range chloride titrators. The titrator did not register any chloride amount. There was no oil sheen on the surface of the water. I contacted M&R Investments pumper Mr. Dean Harris at 11:30 AM this day. He said the he would pump out the dike on 4.6.18.
1362153615 2013-03-01 Salt Water Injection Well No Violations Follow up to 1105286647. Mini test performed and mechanical integrity proven. The annular space held 340 psi for 15 minutes zero loss in pressure. The injection tubing was on vacuum.
1370367273 2013-06-04 Salt Water Injection Well Violations Noted The Injection and annulus were both on a slight vacuum. The well was shut in during my inspection. I notified the field supervisor and a Mechanical Integrity Test will be performed.
1393519955 2014-02-27 Salt Water Injection Well No Violations Follow up to -706051037. Less than a gallon of fresh water was used to fill the annular space. The pressure was brought up to 315 psi and held for the entire testing period with no loss.
1396688652 2011-11-02 Salt Water Injection Well Violations Noted Annulus had slight vacuum, then static. I called Ron Flood and asked when He could test the annulus. Ron told me Thursday or Friday.
1397714783 2011-03-11 Administrative Inspection No Violations Received call from Ron Flood Re: annulus did not have vacuum on it today. Ron determined that the annulus fluid level was down 2.5 gallons. Ron will schedule the mini test this month.
1410378734 2014-09-10 Salt Water Injection Well No Violations No noted violations.
1416839669 2014-11-24 Salt Water Injection Well No Violations No noted violations at well or facility.
1483431535 2011-03-08 Salt Water Injection Well Violations Noted Good identification. Dike is free of fresh water. Annulus had slight vacuum then zero. Injection by gravity feed system. I called Ron Flood and we discussed the annulus pressure issues and Ron told me that the annulus was tested in February and it passed. I told Ron to schedule a test in March and notify me so it can be witnessed.
1488297498 2017-02-27 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pressure and annulus pressure. Identification posted at the well. The pressure on the injection tubing is formation gas pressure (70 psi).
1531752589 2018-07-16 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pressure and annulus pressure. Identification is posted at the facility and the well. The containment dike is free of fluids. The 190 psi pressure on the injection tubing is formation gas pressure. This facility is a gravity feed system from the tanks to the injection well.
1575957181 2011-03-29 Salt Water Injection Well No Violations Witnessed company monthly mini test. Tested annulus to 420 psi for 15 minutes. No drop in test pressure.
1576767846 2019-12-19 0:00 SW No Violations 2.70
1576769431 2019-12-19 0:00 BH No Violations 0.50
1676610215 2015-06-22 Salt Water Injection Well No Violations Mechanical integrity test. Tested annulus with 425 psi for 15 minutes with no loss in pressure. Inspected the injection pressure, containment dike, tanks, and unloading pad.
1680746454 2007-01-28 Drill / Deepen / Reopen No Violations Witnessed the installation and cementing of the surface casing. Good cement return was observed. Drilling operation and site conditions were acceptable.
1695216218 2016-03-11 Salt Water Injection Well No Violations Visual inspection of the release found it to be contained inside the dike. The dike was equipped with a liner. It was evident the tank had been over ran. The tank was mostly clean they had thrown down oil absorbant material and used oil diapers to start cleaning the release. It was clear they were doing a very good job with the spill. I left one of my cards at the tank battery. The clean up will tank a little while, because oil will seep out of the sand and gravel inside the dike. Pictures were taken.
1721872165 2014-07-24 Salt Water Injection Well No Violations No noted violations.
1758232951 2013-06-05 Salt Water Injection Well No Violations Follow up to 1370367273. Witnessed mini Mechanical Integrity Test. 330psi was held on the annular space for 15 minutes with no loss in pressure.
1783096815 2013-05-22 Salt Water Injection Well No Violations Inspected the injection pressure, annulus pressure, unloading pad, containment dike and tanks. Dike is free of oil and water.
1893505383 2016-08-22 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pressure and annulus pressure. The annulus pressure had vacuum then zero pressure. The injection pressure is gravity only (no injection pump). The injection tubing master valve was closed during the inspection. I will request operator to add pressure to the annulus and will follow up.
1913212912 2014-04-21 Salt Water Injection Well No Violations No noted violations.
191582267 2009-12-14 0:00 SW No Violations
1931869312 2010-09-09 Salt Water Injection Well Violations Noted Had vacuum on the annulus. No pressure or vacuum on the tubing. I called Ron Flood (Oxford) and scheduled a mechanical integrity test for this afternoon. Well injects by gravity feed. Well must have mechanical integrity.
1943412458 2016-06-23 Salt Water Injection Well No Violations Mechanical integrity test. Filled the annulus with 7 gallons of water and tested at 445 psi. at 5 minutes 445 psi at 15 minutes 440 psi. Test passed. Inspected the facility containment dike, tanks, and unloading pad. Containment dike had 2 feet of water from on going heavy thunder storm. Dike pump is on and pumping the water into the tank.
1949294924 2009-12-09 Administrative Inspection No Violations Received call from Jack Green (Oxford). 12-9-09 at 8:20 am. Jack left message for me to call him regarding the packer placement and when to circulate the corrosion inhibiter. I returned the call at 8:35am on 12-9-09. Jack informed me that after the frac job the well went on vacuum. Jack is concerned that they will not be able to circulate the corrosion inhibiter before setting the packer. We are going to check the well fluid level in the morning and form a plan after we determine if the well is on vacuum or not.
1963204648 2011-11-03 Salt Water Injection Well No Violations Annulus mini test. Pressured to 380 psi. tested for 15 minutes. At 15 minutes 375 psi. test passed.
1967935463 2009-09-11 Plug / Plug Back No Violations Witnessed squeeze cement through perforations from 1272 to 1278 prior to the conversion to saltwater injection.
1974658200 2015-06-22 Salt Water Injection Well No Violations Witnessed MIT test for the well. The annulus held 425 psi for the required 15 minutes with no loss in pressure.
1977065347 2015-02-11 Salt Water Injection Well No Violations Follow up to -639612144. The fitting were replaced and a mini mechanical integrity test was administered. 330 psi was held on the annulus with no loss in pressure over the 15 minute testing period.
2043302941 2016-10-25 Salt Water Injection Well No Violations Mechanical Integrity Test. Added 8 gallons fresh water to the annulus. Pressured the annulus to 450 psi. At 5 minutes 448 psi. At 15 minutes 445 psi.
2048571368 2016-03-16 Salt Water Injection Well No Violations I followed up and took pictures to show the progress. They have raked the oil absorb and over half of the contaminated area was free and clear of oil.
2099893291 2010-03-15 Salt Water Injection Well No Violations Tested Annulus at 400psi for 15 minutes. At 5 minutes had 398psi, at 15 minutes had 390psi. Good test. Tested line from tanks to well first test at 375psi for 15 min. At 5 minutes had 300 psi. Test failed. Repaired leaks and tested again second test at 440psi for 15 minutes. At 5 minutes had 440psi. At 15 minutes had 430psi. Good test. Electric service will not be done for two weeks. I agreed to allow injection operations with the pumper using a portable pump to keep the dike and concrete pad sump free of water. Until pump system is installed. Brine tanks are positioned to allow gravity feed to injection well.
216115976 2010-12-16 0:00 SW No Violations
259237257 2016-3-16 0:00: SW No Violations
370359353 2016-3-23 0:00: AM No Violations 0.50
436579925 2016-6-15 0:00: SW No Violations 2.00
487618014 2018-5-11 0:00: SW No Violations 2.30
543972759 2019-7-23 0:00: SW No Violations 2.00
564812995 2010-1-27 0:00: SC No Violations
768659186 2011-11-2 0:00: SW No Violations 1.00
791753534 2019-1-29 0:00: SW No Violations 1.00
817686576 2020-6-25 0:00: SW No Violations 2.50
843430314 2016-1-27 0:00: SW No Violations 1.50
864294764 2009-9-9 0:00:0 PL No Violations
935249260 2011-7-22 0:00: SW No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
0259237257 US-OH-122669 2016-04-04 Failure to file salt water injection annual report
0267100567 US-OH-122760 2012-06-25 Violation of injection tubing/fitting requirements
0639612144 US-OH-127246 2015-02-25 Violation of injection tubing/fitting requirements
0639612144 US-OH-127247 2015-02-25 Mechanical failure/contamination
1105286647 US-OH-102596 2013-03-01 Failure to monitor annulus pressure
1341496957 US-OH-109834 2012-07-05 Mechanical failure/contamination
1370367273 US-OH-110936 2013-06-05 Mechanical failure/contamination
1396688652 US-OH-111735 2011-11-07 Failure to monitor annulus pressure
1483431535 US-OH-113759 2011-03-11 Failure to monitor annulus pressure
1931869312 US-OH-119438 2010-09-09 Mechanical failure/contamination

For data sources see[9]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "Risk Based Data Management System - tblStimulation Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  5. ↑ "Risk Based Data Management System - Production Table - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  6. ↑ "Combined Production - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  7. ↑ "Risk Based Data Management System - Production Table - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  8. ↑ "Combined Production - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  9. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://wellwiki-prod.cloud.arc.gwu.edu/index.php?title=34-105-23590&oldid=14042797"