X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-111-21826

Well Details

Well ID: 34-111-21826
Loading map...
Country: United States
State: Ohio
County: Monroe
Municipality: Washington Township
Operator Name: DYE WALTER M
Well Pad ID:
Farm/Lease Name: ULLMAN HARRY
License Status: Producing
License Date: 1971-08-05
Spud Date: 1971-09-01
Spud Drilling Contractor: ROSS WELL SERVICE
Final Drill Date: 1971-12-01
Well Total Depth: 1516.00 ft
Configuration: Vertical
Latitude: 39.580000
Longitude: -81.160000

For data sources see[1]

Well History

Well Status Well Status Date Comment
CO 1971-08-05 1281 DYE WALTER M GeoDate 8/5/71
Original Spud 1971-09-01
Completed 1971-12-01
Reached Total Depth 1971-12-01
Completion Report Received 1974-02-22
Record Last Modified 2017-02-15

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2006-09-11 1489 1504 0
1489 1504 0
1489 1504 0

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
NITR 0 120 Qts 0
NITR 0 70 Qts 0

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
1993 DYE WALTER M 0.00 0.00 365
2011 DYE WALTER M 176.00 41.00 365
2012 DYE WALTER M 182.00 47.00 366
2013 DYE WALTER M 169.00 30.00 365
2014 DYE WALTER M 118.00 0.00 365
2015 DYE WALTER M 74.00 61.00 365
2016 DYE WALTER M 130.00 26.00 365

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
1993 DYE WALTER M Brine 0 365
2011 DYE WALTER M Brine 0 365
2012 DYE WALTER M Brine 0 366
2013 DYE WALTER M Brine 0 365
2014 DYE WALTER M Brine 0 365
2015 DYE WALTER M Brine 0 365
2016 DYE WALTER M Brine 0 365

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1564818590 2020-10-5 0:00: PW No Violations 0.70
-654464950 2020-1-6 0:00:0 PW No Violations 0.50
1244896522 2020-7-16 0:00: PW No Violations 0.70
1338569583 2019-02-26 Production Wells Violations Noted On this day, I found the well equipped with 7 inch diameter casing and 2.375 inch diameter tubing with flowlines attached and the production valves open. It is setup to be produced by means of a pumping unit with rods and an electric motor. No drivebelt is present on the unit. There is (1) 100-barrel steel tank with a knock-out separator on top, and (1) approximately 70-barrel steel tank associated with multiple wells on the property. No identification is present at the wellhead or the tank. According to 1501:9-9-05(A)10, legible identification shall be posted in a conspicuous place on or near the wellhead or the storage tank(s) as to owner, lease name, well number, permit number, county, and an emergency contact number. If multiple wells are being produced into the common tank(s) each wellhead shall be identified as previously stated. Production records are current through 2016. Multiple pictures were taken.
1478994904 2020-7-29 0:00: PW No Violations 1.00
1521173349 2019-6-14 0:00: PW No Violations 0.30

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
1338569583 US-OH-109745 2019-03-28 9-9-05(A)10 Failure to legibly identify well

For data sources see[9]

References