X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-111-24440

Well Details

Well ID: 34-111-24440
Loading map...
Country: United States
State: Ohio
County: Monroe
Municipality: Ohio Township
Operator Name: STATOIL USA ONSHORE PROPERTIES
Well Pad ID: US-OH-000563
Farm/Lease Name: EISENBARTH
License Status: Plugged Back
License Date: 2014-04-08
Spud Date: 2014-05-19
Spud Drilling Contractor:
Final Drill Date: 2014-06-15
Well Total Depth: 11078.00 ft
Configuration: Vertical
Latitude: 39.690000
Longitude: -80.890000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2013-12-06 Proposed Formations:ONODAGA, Issued Date:12/6/2013, Expired Date:12/6/2015 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:ST, Proposed Well Class:STRT
APP 2014-04-08 Proposed Formations:TRENTON, Issued Date:4/8/2014, Expired Date:4/7/2016 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:ST, Proposed Well Class:STRT
Plugged Back 2014-05-16
Reached Total Depth 2014-06-15
Construction Permit Expires 2016-04-07
Change of Owner 2018-08-08 Operator changed from 9065, STATOIL USA ONSHORE PROPERTIES INC to 10187, EQUINOR USA ONSHORE PROPERTIES INC.
Change of Owner 2018-08-09 Operator changed from 10187, EQUINOR USA ONSHORE PROPERTIES INC. to 9065, STATOIL USA ONSHORE PROPERTIES INC - WELL TRANSFERRED INADVERTANTLY TO EQUINOR USA ONSHORE PROPERTIES INC. THIS IS A PB WELL THAT SHOULD HAVE REMAINED WITH STATOIL USA ONSHORE PROPERTIES INC. ON 8/9/2018 CM.
Record Last Modified 2018-08-09

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2016-08-01 11398 17931 0
11398 17931 0
11398 17931 0

For data sources see[3]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 06/16/2016 06/27/2016 18206 7,172,580.0 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 Hazardous and Non-Hazardous Ingredients Sorbitan, mono-9-octadecenoate, (Z) 1338-43-8 1 0.000784096 545
Sorbitan monooleate polyoxyethylene derivative 9005-65-6 1 0.000784096 545
Hydrochloric acid 7647-01-0 15 0.265427 46070
Bentonite, benzyl(hydrogenated

tallow alkyl) dimethylammonium stearate complex

121888-68-4 5 0.00295615 2053
Surfactant mixture Confidential 1 0.00118246 822
Alcohols, C14-C15, ethoxylated 68951-67-7 30 0.00026256 183
Olefins Confidential 5 0.000105024 76
Amide Confidential 5 0.00392048 2722
Sodium chloride 7647-14-5 5 0.00392048 2722
Methanol 67-56-1 60 0.00052512 365
Fatty acids, tall oil Confidential 30 0.00026256 183
Alcohols ethoxylated Confidential 5 0.00392048 2722
Ammonium chloride 12125-02-9 5 0.00392048 2722
Silica gel 112926-00-8 1 0.00059123 411
Polyacrylamide copolymer Confidential 30 0.0235229 16332
Crystalline silica, quartz 14808-60-7 100 13.3599 9,275,330.0
Sodium sulfate 7757-82-6 0.1 0.00000062 1
Hydrotreated light petroleum distillate 64742-47-8 30 0.0235229 16332
Water 7732-18-5 100 0.489425 339791
Sodium persulfate 7775-27-1 100 0.000622242 432
Propargyl alcohol 107-19-7 10 0.00008752 61
Guar gum 9000-30-0 100 0.059123 41047
Crystalline Silica, Quartz 14808-60-7 0.1 0.00005912 42
NFIDB:MC B-8614 NFIDB:MC B-8614 100 0 0
Reaction product of acetophenone,

formaldehyde, thiourea and oleic acid in dimethyl formamide

68527-49-1 30 0.00026256 183
Fresh Water Operator Base Fluid Fresh Water 7732-18-5 100 86.0586 59,747,400.0
FR-66, HAI-OS ACID INHIBITOR, MC

B-8614, SAND-COMMON WHITE-100 MESH, SSA-2, BULK (100003676), SAND-PREMIUM WHITE-40/70, BULK, SP BREAKER, WG-36 GELLING AGENT

Halliburton Breaker, Corrosion Inhibitor, Friction Reducer, Gelling Agent, Proppant NA NA 0 0 0
HYDROCHLORIC ACID Halliburton Base Fluid HCL 7647-01-0 0 0 0

For data sources see[4]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2016 STATOIL USA ONSHORE PROPERTIES Brine 0 14
2017 STATOIL USA ONSHORE PROPERTIES Brine 27605 333
2018 EQUINOR USA ONSHORE PROPERTIES Brine 0 92
2019 EQUINOR USA ONSHORE PROPERTIES Brine 0 90

For data sources see[5] [6]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1089342143 2018-1-10 0:00: WR No Violations 0.50
-130985333 2016-6-20 0:00: CT No Violations 2.50
-1457477978 2014-4-25 0:00: DD No Violations 0.60
-2028913484 2016-6-2 0:00:0 CT No Violations 1.50
-87552838 2014-5-7 0:00:0 DD No Violations 1.80
0087552838 2014-05-07 Drill / Deepen / Reopen No Violations Status check inspection on the drilling process found the current drilling depth to be 8,014 with a projected true vertical depth of 10,869, the company will do various well bore formation surveys then plug the well back to their horizontal kick off point.
0130985333 2016-06-20 Completion Testing No Violations Status check inspection on the current well stimulation process found Halliburton Completion Service on location with 6 of the proposed 22 stages currently stimulated. Horizontal Wireline Services is on location and running into the well bore with a perforating gun and solid bridge plug with the plug to be set at 15,568 and the well to be perforated with 40 perforations shot in 5 clusters of 8 shots between the measured depths of 15,598 and 15,840 with the total well bore effected area for each stage being 300 from bridge plug to top perforation. All completion equipment is placed on polymer containment.
0182724941 2016-06-16 Completion Testing No Violations Status check inspection on the well completion process found Halliburton Completion Service on location attempting to stimulate the 1st stage of the well completion process. The company has pumped a total of 6,000 gl of a mixture of 15% & 28% HCL into the well bore and has pumped 1,500 barrels of H20 behind the HCL at a rate of 29 barrels a minute and pressure of 10,980 psi. The completion well head contractor is FMC and the completion iron is 15,000 psi rated working pressure. Horizontal Wireline Company is on location along with Roc Water flow back services. All completion support equipment is located on polymer containment and all completion operations are during daylight hours only.
1089342143 2018-01-10 Work Over Reconditioning No Violations On site status check inspection found the company preparing to secure the well heads and subsurface well bores in anticipation of bringing in a drilling rig to drill additional wells on the pad. The wellbore is currently equipped with 5.5 diameter production casing with 2.875 diameter production tubing installed into the well head set on a down hole compression set down packer. The company has indicated they will mobilize KLX Slick line wireline service and set retrievable bridge plugs inside the 2.857 tubing that is set on a compression set down hook wall packer. Once the tubing is isolated the company will pull the tubing out of the packer and pull 10 joints of tubing and then hang the remaining tubing in the well bore off of a packer up hole near surface. A (BPR) back pressure valve will be installed inside well head B section before the well head is disassembled and a R-24 night cap is installed on the well head. All production equipment will be removed and the remaining well head will be below grade level.
1397929678 2014-04-19 Casing String Witnessed No Violations The said well was spudded on 11/13/13 by Butches Rat hole and 100 of 20 conductor was set and cemented back to surface on 11/14/2013 by Formation cementing. On 04/19/2014 531 of 13.375 surface casing was ran and cemented back to surface by Halliburton Cement services with 24 sks of class A cement used with a casing shoe and sting in float collar ran with 50 barrels of gel spacer ran ahead with circulation established to surface prior to cementing with 15 barrels of good cement returns to surface and the mix water tested with chloride levels showing below 100 parts per million, the casing shall be pressure tested with the blow out preventer when it is nippled up.
1400241536 2014-05-16 Plug / Plug Back No Violations Orion Rig # circulated on 8.5open hole with 12.6 ppg mud. Then ran 2.875tubing at 7.9lb/ft at depth of 10406.07. Then a 2 change over sub to 5.5 @ 568.85 @19.5lb.ft drill pipe. and circulated on hole with fluid weight of 12.6 ppg. Halliburton is setting the bottom plug at 11068-10565with 194 sacks at 1.02 yield and 4.06 gallon per sack mix water requirement. The weight of cement slurry is 16.8 ppg. The kick plug will be set at 10500-9900. There was 252 sacks of dense cement run with a yield at .94 and a 3.46 gallons of mix water per sack. The weight of the cement slurry is 17.4 ppg. The 9.625casing is set at 6160. They are running a tuned spacer ahead and behind of every plug and it weighs 13.5lb/gallon. Good circulation was established. The Ph of the mix water was at 6 and the temperature was at 77 degrees Fahrenheit.
1457477978 2014-04-25 Drill / Deepen / Reopen No Violations Status check inspection of the drilling process found the current drilling depth to be 3,639 using a 12.250 drill bit and the company drilling with synthetic bases drilling mud.
1465483128 2016-06-09 Completion Testing No Violations Status check inspection on the well completion process found Deep Well Service tubing snubbing unit rigged up on the well. Historically the well was drilled and 18,206 of 23lb/ft 5.5 production casing was ran in the well with a toe sleeve in place at 17,948. Currently the service company ran in the hole with a 15,000 psi rated cast iron bridge plug and set it at 17,968, the tubing was pulled and the casing was pressure tested to 12,500 psi. The company the ran back in the hole and perforated the 1st stage to be stimulated between the measured depths of 17,933 to 17,706, the well was perforated in 4 stages with 10 perforations in each stage. The snubbing unit shall now pull the tubing and break down from the well.
1475165739 2016-09-29 Completion Testing No Violations
182724941 2016-6-16 0:00: CT No Violations
1852591382 2020-5-18 0:00: PW No Violations 0.30
2028913484 2016-06-02 Completion Testing No Violations Preliminary Restoration status check inspection found the well site meets ORC 1509.072 with erosion control and vegetation established. Addressing the well head- The company has contractors mobilized on location installing polymer containment in preparation to complete the well stimulation process which is slated to begin within the next 14 days. Also scheduled is a tubing snubbing unit is slated to move onto the location in the next 2 days, the snubbing unit is owned by Deep Well Service and will run in the hole and set a retrievable bridge plug in order for the 5.5 production casing to be pressure tested. Halliburton pressure pumping stimulation service operations will then follow.

For data sources see[7]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "FracFocus Fracking Chemicals Database". 2019-04-02. Retrieved 2019-06-19. 
  5. ↑ "Risk Based Data Management System - Production Table - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  6. ↑ "Combined Production - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  7. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://wellwiki-prod.cloud.arc.gwu.edu/index.php?title=34-111-24440&oldid=14105891"