Well Details

Well ID: 34-111-24609
Country: United States
State: Ohio
County: Monroe
Municipality: Salem Township
Operator Name: ECLIPSE RESOURCES I LP
Well Pad ID: US-OH-001274
Farm/Lease Name: CIRCOSTA
License Status: Producing
License Date: 2015-08-14
Spud Date: 2015-08-17
Spud Drilling Contractor: H&P DRILLING
Final Drill Date: 2016-07-07
Well Total Depth: 21404.00 ft
Configuration: Horizontal
Latitude: 39.770000
Longitude: -80.920000

For data sources see

Well History

Well Status	Well Status Date	Comment
APP	2015-08-14	Proposed Formations:UTICA THRU POINT PLEASANT, Issued Date:8/14/2015, Expired Date:8/13/2017 12:00:00 PM, Drilling unit acres:703.984, Proposed Well Type:OG, Proposed Well Class:EOUT
Reached Total Depth	2016-07-07
Correction to Well	2016-10-28	CHANGE TAKEPOINT.TARGET PER AS DRILLED PLAT RCVD 9-23-16-ALE
Correction to Well	2017-01-06	CHANGE IN TAKEPOINT/TARGET/ACREAGE PER REVISED AS-DRILLED PLAT-ALE
Completion Report Received	2017-02-28
Construction Permit Expires	2017-08-13
Record Last Modified	2018-02-22

For data sources see

Perforation Treatments

Perforation Date	Interval Top (ft)	Interval Base (ft)	Number of Shots
2017-03-01	11587	21191	0
	11587	21191	0
	11587	21191	0

For data sources see

Fracking Activities

Fracking Jobs

Job Number	Job Start Date	Job End Date	True Vertical Depth (ft)	Total Water Volume (gal)	Total Non-Water Volume (gal)
1	09/20/2016	10/14/2016	10361	21,794,000.0	0

Fluid Composition Data

Job Number	Trade Name	Supplier	Purpose	Ingredient Name	CAS Number	Additive Percentage by Mass	Job Percentage by Mass	Mass Used (lb)
1	HAI-OS ACID INHIBITOR	Halliburton	Corrosion Inhibitor	Listed Below	Listed Below	0	0	0
	HCL Acid >10%	Halliburton	Solvent	Listed Below	Listed Below	0	0	0
	SAND-PREMIUM WHITE-40/70	Halliburton	Proppant	Listed Below	Listed Below	0	0	0
				Alcohols, C12-16, ethoxylated	68551-12-2	5	0.00002649	55
				Alcohols, C12-13, ethoxylated	66455-14-9	30	0.000159431	331
				Acetic anhydride	108-24-7	100	0.00220988	4588
				Acetic acid	64-19-7	60	0.0013265	2754
				Ethoxylated alcohols	Proprietary	30	0.000137274	285
				Glycerine	56-81-5	5	0.00002649	55
				Propargyl alcohol	107-19-7	10	0.00004576	95
				Olefins	Proprietary	5	0.00005587	116
				Fatty acids, tall oil	Proprietary	30	0.000137274	285
				Hydrochloric acid	7647-01-0	10	0.0551795	114560
				Methanol	67-56-1	60	0.000274549	570
				Reaction product of acetophenone, formaldehyde, thiourea and oleic acid in dimethyl formamide	68527-49-1	30	0.000137274	285
				Ethylene oxide	75-21-8	0.01	0.00000048	1
				Crystalline silica, quartz	14808-60-7	100	12.0019	24,917,500.0
	Fresh Water	Operator	Base Fluid	Water	7732-18-5	100	87.4431	181,544,000.0
	SAND-COMMON WHITE - 100 MESH	Halliburton	Proppant	Listed Below	Listed Below	0	0	0
	FDP-S1225-15	Halliburton	Surfactant	Listed Below	Listed Below	0	0	0
	Ingredients	Listed Above	Listed Above	Water	7732-18-5	100	0.552324	1,146,700.0
	FE-1A ACIDIZING COMPOSITION	Halliburton	Additive	Listed Below	Listed Below	0	0	0

For data sources see

Stimulations Data

Stimulation Date	Chemical Agent	Chemical Agent Concentration (%)	Fracking Fluid Volume	Mass of Proppant Used (lb)	Fracking Company	Comments
2016-09-20	H2O	0	454531 Gal	365576	Halliburton	STAGE 1/64 3 SHOTS
2016-10-10	H2O	0	263867 Gal	388339	Halliburton	STAGE 64/64 36 SHOTS STAGES 2-63 SEE IMAGES

For data sources see

Production Data

Period	Operator Name	Gas Quantity (mcf)	Oil Quantity (bbl)	Production Days
2016	ECLIPSE RESOURCES I LP	143732	0	12
2017	ECLIPSE RESOURCES I LP	6485892	0	364
2018	ECLIPSE RESOURCES I LP	1608083	0	324
2019	ECLIPSE RESOURCES I LP	250381	0	90

For data sources see

Waste Data

Period	Operator Name	Waste Type	Quantity (bbl)	Production Days
2016	ECLIPSE RESOURCES I LP	Brine	7521	12
2017	ECLIPSE RESOURCES I LP	Brine	59258	364
2018	ECLIPSE RESOURCES I LP	Brine	50023	324
2019	ECLIPSE RESOURCES I LP	Brine	2851	90

For data sources see

Inspection Data

Inspections Performed

Inspection ID	Inspection Date	Inspection Type	Inspection Result	Inspection Comments
-1029667525	2018-5-22 0:00:	PW	No Violations	0.30
-1309143619	2020-5-22 0:00:	PW	No Violations	1.00
-1594290148	2016-6-22 0:00:	DD	No Violations	1.70
-1740130108	2017-3-28 0:00:	PW	No Violations	1.00
-545097854	2017-1-5 0:00:0	PW	No Violations	0.50
-69880047	2016-12-21 0:00	CT	No Violations	0.80
0069880047	2016-12-21	Completion Testing	No Violations	On the day of my inspection I witnessed the well was flowing back with through Tetra Services flowback equipment to sales with 6200 pounds per square inches on the casing at 7 MMCF per day and 54 barrels per hour through a 24/64 inch choke. I met with Consultant Cristo Giannareas and completed walk around.
0545097854	2017-01-05	Production Wells	No Violations	On the day of inspection accompanied by ODNR Senior Health Physicist Paul Carder, I witnessed the well was online with the valves in the open position. Gauges present read 7150 pounds per square inches on the casing and 6150 pounds per square inches on the tubing with annular monitoring in place. Production equipment included a sand trap, a line heater and a 2- stage vertical separator. Also present included 4-400 barrel tanks within containment, 2 filter separators, 2 vertical scrubbers, 2 heater treaters and a gas combustor all shared with 34111246100000 Pittman 3H, 34111245920000 Holliday A 1H, 34111245910000 Holliday A 3H and 34111245960000 Holliday B 7H. We met with Eclipse EHS Technician Ken Durst and completed walk around revealing containment was being removed. I instructed Mr. Durst to fill the mouse holes in accordance with OAC 1501:9-11-11 and to continue to pull fluids out of the sump until the levels are acceptable.
0761674406	2016-07-06	Drill / Deepen / Reopen	No Violations -110 Casing was ran into the well bore with a float shoe and collar ran along with (3) Nine Energy -Smart Start flow guns in the casing string at 21,189-21,139&21,092. Schlumberger is on location to cement the casing using a 60 barrel Mud Push 15.lb.gl pre cement sweep followed by 4410 sacks of Class A-15.6 lb/gl 1.19 yield Cement displaced with 452 barrels of H2O with the final circulating pressure of 4,180 psi and the plug bumped at 4,940 psi, 800 psi over. The job design was for a calculated top of cement on the 5.5 annular of 431
1029667525	2018-05-22	Production Wells	No Violations	Status check inspection found the well drilling and completion process now complete and the well producing through 2.875 production tubing set at 10,183 with 2 manual and 2 emergency shut down in line valves present in the production flowline. Deep well service tubing snubbing unit is on site and finishing up switching out the production tubing 2.875 string. FMC well head is on site and has reassembled the well head consist and pressure tested the production tree stack. Proper well identification is posted. Annular pressure monitoring is in place on the 13.375 and 9.625 well head sections with zero pressure on the 9.625 and 200 psi on the 13.375 well head sections. Production related equipment on site consists of 5 gas processing in line heaters and 5 sand trap separators along with a single glycol heater. The production fluid facility consists of 4 steel construction tanks of 400 barrel capacity situated inside a polymer lined steel containment area.
1440015582	2015-08-19	Casing String Witnessed	No Violations	The said well was spudded on 08/17/2015 by Precision Rat Hole with a 30 x 120 conductor borehole being drilled and 120 of 24 .375 wall 94.62# pound per foot weld connection casing being ran. Universal Well Service is the cement contractor on location to cement the casing using 320 sacks of class A-3% calcium .25 pound per sack loss circulation material with the pipe capacity being displaced with 53 barrels of fresh water and 10 barrels of 6% gel prior to cementing with good cement witnessed to surface. Inspector Brian Sefcik accompanied me on this day.
1466199875	2016-06-17	Casing String Witnessed	No Violations	On site inspection to witness the surface casing cement job found H&P Drilling rig # 531 on location with the 17.5 production borehole drilled to a measured depth of 1,760 with a total of 1723 of 13.375J-55 Buttress thread casing ran along with the following casing equipment -a float shoe and float collar with proper centralizer placement demonstrated. Circulation was established during the running of the casing and maintained throughout the cement job with 20 barrels of 6% gel spacer ran ahead of the 1,334 sacks of class A cement. The casing was pressure tested to 500 psi over displacement pressure upon the landing of the cement plug with the floats holding and good cement returns to surface, the casing pressure test showed a initial pressure of 1,300 psi with a 75 psi loss in the 1st 5 minutes, it was observed that the cement head was leaking and the company was directed to test the casing when the BOP stack was installed. A casing pressure test was submitted with the BOP test the following day.
1475167062	2016-09-29	Completion Testing	No Violations	Status check inspection on the well completion process found Halliburton pressure pumping service on location stimulating stage 29 of 64 total stages to be stimulated. Nine Energy wireline services perforated the stage from 16,895 to 17,001 with 36 perforations in 3 clusters with a completion plug being set at 17,304. FMC Well Head is providing the completion well head. The annular pressure is being monitored electronically.
1594290148	2016-06-22	Drill / Deepen / Reopen	No Violations	Status check inspection on the well drilling process found H&P Drilling rig 531 on location with the 12.250 1st intermediate well bore total drilling depth recently reached at a measured depth of 9,484. The company is currently running the 9.625 casing at a measured depth of 8,088and has stopped running casing to load the casing and hole with processed water just below the Clinton formation.
1740130108	2017-03-28	Production Wells	No Violations	On the day of inspection I witnessed the well was online with the valves in the open position. Gauges present read 5480 pounds per square inches on the casing and 4510 pounds per square inches on the tubing with annular monitoring in place. Production equipment included a sand trap, a line heater and a 2- stage vertical separator. Also present included 4-400 barrel tanks within containment, 2 filter separators, 2 vertical scrubbers, 2 heater treaters and a gas combustor all shared with 34111246100000 Pittman 3H, 34111245920000 Holliday A 1H, 34111245910000 Holliday A 3H and 34111245960000 Holliday B 7H.
1820372964	2017-03-21	Preliminary Restoration	No Violations	Preliminary Restoration found the area affected by the well pad construction meets ORC 1509.072 with vegetation established and erosion control in place. The lease road is in good repair and stoned. The location entry point is posted with the owners contact information. The location is fenced with chain link fence. There is a total of 6 wells on the pad 5 of which are complete and all 6 have identification posted. The said well has a casing and tubing well head in place and is equipped with tubing head valves and B section cross valves. There is a Hydraulic operated electrically controlled emergency valve on the tubing head output flow line that has shut down points at the well head and production facility along with at the well pad entry point. Also on location downstream from the well head is a sand trap and line heater and then a mechanical separator. The mechanical separator sends the processed fluid to the production facility that consists of 4 steel construction 400 barrel capacity production tanks located inside a polymer lined steel containment area. There is also 2 dehydration units on location that service the 6 total line heaters on the pad.
761674406	2016-7-6 0:00:0	DD	No Violations	3.50

For data sources see