X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-111-24803

Well Details

Well ID: 34-111-24803
Loading map...
Country: United States
State: Ohio
County: Monroe
Municipality: Salem Township
Operator Name: ECLIPSE RESOURCES I LP
Well Pad ID: US-OH-000800
Farm/Lease Name: BALLPARK
License Status: Producing
License Date: 2017-11-20
Spud Date: 2017-11-29
Spud Drilling Contractor: H&P DRILLING
Final Drill Date: 2018-03-10
Well Total Depth: 19216.00 ft
Configuration: Horizontal
Latitude: 39.790000
Longitude: -80.870000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2017-11-20 Proposed Formations:UTICA/POINT PLEASANT, Issued Date:11/20/2017, Expired Date:11/20/2019 12:00:00 PM, Drilling unit acres:355.549, Proposed Well Type:OG, Proposed Well Class:POOL
Reached Total Depth 2018-03-10
Correction to Well 2018-04-10 UPDATE TARGET/TAKE PER AS-DRILLED PLAT
Completion Report Received 2018-06-25
Record Last Modified 2018-07-03
Construction Permit Expires 2019-11-20

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2018-07-02 10976 11100 0
2018-07-02 18960 19063 0
18960 19063 0
10976 11100 0
10976 11100 0

For data sources see[3]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 04/05/2018 04/23/2018 10857 19,529,300.0 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 Produced Water Operator Base Fluid Water 7732-18-5 100 0.0823538 151087
HP-9601 One AquaSource Inc. Additive Listed Below Listed Below 0 0 0
FE-2A Halliburton Additive Listed Below Listed Below 0 0 0
PROP-RC CERAMIC-30/50, BULK Halliburton Proppant Listed Below Listed Below 0 0 0
Ingredients Listed Above Listed Above Water 7732-18-5 100 0.569171 1,044,210.0
SAND-PREMIUM WHITE-40/70, BULK Halliburton Proppant Listed Below Listed Below 0 0 0
HP-2816 One AquaSource Inc. Friction Reducer Listed Below Listed Below 0 0 0
SAND-COMMON WHITE - 100 MESH, 3307 LB BAG Halliburton Proppant Listed Below Listed Below 0 0 0
MB-7530 One AquaSource Inc. Biocide Listed Below Listed Below 0 0 0
HP-2220 One AquaSource Inc. Scale Inhibitor Listed Below Listed Below 0 0 0
OILPERM A Halliburton Non-ionic Surfactant Listed Below Listed Below 0 0 0
HAI-OS ACID INHIBITOR Halliburton Corrosion Inhibitor Listed Below Listed Below 0 0 0
Ammonium chloride 12125-02-9 1.5 0.00042865 787
Modified thiourea polymer Proprietary 30 0.000128441 236
Dazomet 533-74-4 24 0.00572273 10499
Ethoxylated alcohols Proprietary 30 0.000128441 236
Oxyalkylated phenolic resin Proprietary 30 0.000174027 320
Mullite 1302-93-8 100 0.269485 494400
Sodium hydroxide 1310-73-2 4 0.000953789 1750
Olefins Proprietary 5 0.00005138 96
Hexamethylenetetramine 100-97-0 1 0.00269485 4944
Methanol 67-56-1 60 0.000256881 472
Ethanol 64-17-5 60 0.000261041 479
Citric acid 77-92-9 60 0.00179054 3285
Poly (oxy-1, 2-ethanediyl), a-tridecyl-w-hydroxy-, branched 69011-36-5 5 0.00214267 3931
Fatty acids, tall oil Proprietary 30 0.000128441 236
Ammonium persulfate 7727-54-0 95 0.0014499 2660
Organic phosphate copolymer 71050-62-9 25 0.00309211 5673
Heavy aromatic petroleum naphtha 64742-94-5 30 0.000130521 240
Propargyl alcohol 107-19-7 10 0.00004281 79
Distillates (petroleum, hydrotreated light) 64742-47-8 20 0.0137145 25161
Hydrochloric acid 7647-01-0 15 0.085107 156138
Phenol / formaldehyde resin 9003-35-4 5 0.0134743 24720
1,2,4 Trimethylbenzene 95-63-6 1 0.00000435 8
Crystalline silica, quartz 14808-60-7 100 10.4525 19,176,300.0
Poly(oxy-1,2-ethanediyl), alpha-(4-nonylphenyl)-omega-hydroxy-,

branched

127087-87-0 5 0.00002175 40
Naphthalene 91-20-3 5 0.00002175 40
Fresh Water Operator Base Fluid Water 7732-18-5 100 88.5961 162,539,000.0
HP-2814 One AquaSource Inc. Friction Reducer Listed Below Listed Below 0 0 0
HYDROCHLORIC ACID Halliburton Solvent Listed Below Listed Below 0 0 0

For data sources see[4]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
2018-04-04 H2O 15 453022 Gal 293190 Halliburton STAGE 1 0F 50
2018-04-23 H2O 0 393066 Gal 374830 Halliburton STAGE 50 OF 50 SEE IMAGES FOR STAGES 2-49

For data sources see[5]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2018 ECLIPSE RESOURCES I LP 3578801 0 183
2019 ECLIPSE RESOURCES I LP 972449 0 90

For data sources see[6] [7]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2018 ECLIPSE RESOURCES I LP Brine 74432 183
2019 ECLIPSE RESOURCES I LP Brine 8151 90

For data sources see[8] [9]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-443382197 2018-2-20 0:00: CS No Violations 4.00
0443382197 2018-02-20 Casing String Witnessed No Violations On site inspection to witness the 18.625 diameter surface-mine string cement job with H&P Drilling rig 531 on location along with Schlumberger Cement Service. The rig has drilled a 26 diameter well bore to a total depth of 889. The mine void was encountered between the depths of 775 and 790 and the first attempt to rung the 18.625 diameter casing through the mine on the morning of 02/18/2018 was unsuccessful. At that point I returned home and stayed in contact with the rig for the next 2 days until hearing from them on this morning indicating that the company had set casing through the mine and was preparing to begin the cement job. Casing was reported to be set at 821 and the job was initiated by Schlumberger by first pumping the bottom balance cement job below the mine void. The job consisted of 20 barrels of 6% gel spacer followed by a 97 barrel cement class A cement blend displaced with 233 barrels of fresh water. Upon landing of the bottom plug at 70 psi the cement pressure was increased in increments to test the casing and open the swell packer. Once the packer was confirmed as open the DV tool opening device was dropped and the 2nd plug installed in the well head. Circulation was established and the upper section cement job was then pumped with 288 barrels of class A surface set cement ran displaced with 199 barrels of fresh water. Cement returns were witnessed to surface at 160 barrels into displacement and the casing was pressure tested to 1,290 psi upon the landing of the cement plug. The casing floats held.
0864085219 2018-04-26 Completion Testing No Violations Status check inspection found the well drilling and stimulation process now complete. The pad is being prepped for completion drill out. A tubing snubbing unit contractor identified as Deep well Services is scheduled to mobilize onto the well pad tomorrow 04/27/2018. The well head consists of a lower A section and mid B section with a master valve assembled on top of the B section and a flow cross above the master valve. I spoke with the company man and discussed the well construction rules regarding annular pressure monitoring. All operations are being conducted on polymer containment with the well pad earthen berm serving as the perimeter boundary primary containment.
0947924029 2018-08-28 Preliminary Restoration No Violations Preliminary Restoration found the area affected by the well pad construction meets ORC 1509.072 with vegetation established and erosion control in place. The well pad and lease road are of stone surface construction and in good repair. 4 total well are now present on the well pad. The said well is equipped with a lower A and upper B section well head assembly with 2 diameter riser pipes attached to each well head section, the riser pipes are equipped with valves and gauges to monitor annular pressure. The A section gauge which monitors the pressure between the 13.375 and 9.625 diameter casing string reads 500 pounds pressure. The B section gauge which reads the pressure between the 5.5 and 9.625 diameter casing string reads 400 pounds pressure. The 5.5 internal casing pressure is 4,240 pounds and the flow line pressure downstream of the well head choke is 1,731 pounds. The completion master valve is still on the well and the well is selling off the 5.5 production casing. On the left rear side of the well pad is the production fluid facility consisting of (3) steel construction 400 barrel capacity tanks along with a single 100 barrel tank, all situated inside a polymer lined steel containment dike area. There is a 3rd party midstream pipeline point and compressor on a separate pad at the rear of the location.
1518982449 2018-02-18 Casing String Witnessed No Violations On this day, I accompanied ODNR Inspector William Stolarik to witness the 18.625-inch diameter surface casing cement job with Schlumberger. Please refer to his comments for a detailed report. The H&P Flex Rig 531 drilled a 26-inch diameter borehole to a depth of 889 feet from a kelly bushing of 30 feet. A mine void is encountered from a depth of 775 feet to 790 feet. Wyoming Casing is unable to successfully insert the casing string due becoming stuck at the mine void. It is decided to pull back out of the hole and lay the casing down.
1519142834 2018-02-18 Casing String Witnessed No Violations On site inspection to witness the surface-mine string cement job accompanied on this day by ODNR Inspector Tom Thomas. Upon Inspection it was observed that H&P Drilling rig 531 was on location along with Wyoming Casing Services and Schlumberger Cement Service. The rig has drilled a 26 diameter borehole to a measured depth of 889 with the Pittsburgh # 8 coal seam marked at 775 to 790. Initially on 02/28/2018 the company was unable to get casing through the mine void and pulled the casing so they could ream the well bore and clean out the bottom of the well bore where material had fell in and filled up the well bore. It took 2 more attempts over the next 2 days to get casing through the well to a minimum of 30. On the morning of 2/20/2018 I was notified that the company had set casing through the mine and was preparing to begin the cement job.
1519205498 2018-02-21 Drill / Deepen / Reopen No Violations On site inspection at 3:00 am to witness the 18.625 mine string hydrostatic pressure test. H&P Drilling rig 531 is on location and has drilled out the casing string cement plugs float collar and casing shoe and has drilled down to 910. The discharge flow line was disassembled and a block off plate installed. The well bore was loaded with fresh water, the air body rotating head was removed and a fluid level was confirmed as static inside the air body. The air body rotating head was installed and the well bore filled with fluid with the flow line block off plate present 30 (psi) pound per square inch fluid pressure was applied over top of the 430 psi hydrostatic. The pressure held with no recorded loss for 15 minuets.
837526747 2020-4-17 0:00: PW No Violations 0.30
864085219 2018-4-26 0:00: CT No Violations 0.50
947924029 2018-8-28 0:00: PL No Violations 0.50

For data sources see[10]

References