X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-115-23972

Well Details

Well ID: 34-115-23972
Loading map...
Country: United States
State: Ohio
County: Morgan
Municipality: Bristol Township
Operator Name: KILLBUCK CREEK OIL CO LLC
Well Pad ID:
Farm/Lease Name: WILSON DELMAR
License Status: Producing
License Date: 1986-11-12
Spud Date: 1987-07-31
Spud Drilling Contractor: R WOLFE DRLG
Final Drill Date: 1987-08-01
Well Total Depth: 1650.00 ft
Configuration: Vertical
Latitude: 39.680000
Longitude: -81.820000

For data sources see[1]

Well History

Well Status Well Status Date Comment
Original Spud 1987-07-31
Completed 1987-08-01
Reached Total Depth 1987-08-01
Completion Report Received 1987-08-31
Construction Permit Expires 1987-11-12
Change of Owner 1999-08-10 Operator changed from 2669, WOOD DONALD E to 471, EAGLE MOUNTAIN ENERGY
Change of Owner 1999-08-10 Operator changed from 471, EAGLE MOUNTAIN ENERGY to 1512, ALTIER H L SERVICE CO INC
Change of Owner 2007-10-26 Operator changed from 1512, ALTIER H L SERVICE CO INC to 8026, KILLBUCK CREEK OIL CO LLC
Last Compliance Report 2014-01-15
Record Last Modified 2014-01-15

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
1999-04-05 1510 1522 12
1510 1522 12
1510 1522 12

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
H2O 0 900 Bbl 20000

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
1987 EAGLE MOUNTAIN ENERGY 2135.00 0.00 112
1988 EAGLE MOUNTAIN ENERGY 5677.00 0.00 365
1989 SCION ENERGY INC 3612.00 0.00 365
1990 EAGLE MOUNTAIN ENERGY 2743.00 0.00 365
1991 EAGLE MOUNTAIN ENERGY 1801.00 0.00 365
1996 EAGLE MOUNTAIN ENERGY 0.00 0.00 365
1997 EAGLE MOUNTAIN ENERGY 0.00 0.00 365
1998 EAGLE MOUNTAIN ENERGY 0.00 0.00 365
2001 H L ALTIER SERVICE CO INC 0.00 0.00 30
2002 H L ALTIER SERVICE CO INC 0.00 0.00 0
2003 H L ALTIER SERVICE CO INC 0.00 0.00 25
2004 H L ALTIER SERVICE CO INC 0.00 0.00 30
2005 H L ALTIER SERVICE CO INC 22.00 0.00 30
2006 H L ALTIER SERVICE CO INC 44.00 0.00 30
2007 H L ALTIER SERVICE CO INC 55.00 0.00 30
2010 KILLBUCK CREEK OIL CO LLC 0.00 0.00 0
2011 KILLBUCK CREEK OIL CO LLC 0.00 0.00 45
2012 KILLBUCK CREEK OIL CO LLC 0.00 0.00 0

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
1987 EAGLE MOUNTAIN ENERGY Brine 265 112
1988 EAGLE MOUNTAIN ENERGY Brine 147 365
1989 SCION ENERGY INC Brine 54 365
1990 EAGLE MOUNTAIN ENERGY Brine 12 365
1991 EAGLE MOUNTAIN ENERGY Brine 0 365
1996 EAGLE MOUNTAIN ENERGY Brine 0 365
1997 EAGLE MOUNTAIN ENERGY Brine 0 365
1998 EAGLE MOUNTAIN ENERGY Brine 0 365
2001 H L ALTIER SERVICE CO INC Brine 0 30
2002 H L ALTIER SERVICE CO INC Brine 0 0
2003 H L ALTIER SERVICE CO INC Brine 12 25
2004 H L ALTIER SERVICE CO INC Brine 32 30
2005 H L ALTIER SERVICE CO INC Brine 0 30
2006 H L ALTIER SERVICE CO INC Brine 0 30
2007 H L ALTIER SERVICE CO INC Brine 0 30
2010 KILLBUCK CREEK OIL CO LLC Brine 0 0
2011 KILLBUCK CREEK OIL CO LLC Brine 0 45
2012 KILLBUCK CREEK OIL CO LLC Brine 0 0

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1367732294 2013-12-10 0:00 AM No Violations
-175489151 2018-12-13 0:00 PW No Violations 0.50
-1989626314 2020-3-30 0:00: TD No Violations 0.50
-22542276 2017-1-19 0:00: PW No Violations 1.00
-490635967 2012-12-6 0:00: PW No Violations 2.00
-775026207 2018-8-22 0:00: PW No Violations 0.50
-779024439 2014-3-5 0:00:0 PW No Violations 1.30
0001289i28 2001-03-27 Annular Disposal No Violations TAAD well not being used for AD
0022531438 2015-10-02 Production Wells No Violations On my inspection today I found that the compliance notice has still not been met. The pump still has no motor on the pump jack and the well is still not producing. I contacted Jim and let him know if this were to continue there would be a chiefs order to fix the well. He informed me he would get a motor on the pump in the next week or so.
0022542276 2017-01-19 Production Wells No Violations The inspection this day revealed that this well is equipped with a pumping unit, a 4 1/2 inch diameter wellhead, 1 1/2 inch diameter production tubing, and 2 inch diameter steel production lines. The valves on the wellhead are closed at the time of inspection. There is a single 100 barrel steel tank and a 50 barrel steel tank at the entrance to this well. After reading previous reports Jim Heughey of Killbuck claims it is a tank from a Chipco well that was plugged. There is no identification on the tank but, there is a meter box with a chart in it for one of Killbucks other wells not this one specifically. The chart in the box is from 10/15/16. There has been no resolution to the idle well issue on this well and this well is in nonproduction at the time of inspection.
0108713748 2015-06-29 Production Wells No Violations I returned to this well to do a follow-up on it. The well is still not capable of production at this time. The motor has not been put on the production unit yet. I will contact the company and let them know this still needs to be done.
0175489151 2018-12-13 Production Wells No Violations I returned to this well to do a follow-up on it for being idle and incapable of production. The well is still not capable of production at this time. The motor has not been put on the production unit yet and the production valves are closed at the wellhead. I made a phone call today to Jim Huey to talk to him about the well. Jim stated that he has a few vacation days to use before the end of the year so he will put a motor on the pumping unit to pump this well. I told him to contact me as soon as he gets this done.
0470593429 2015-03-19 Production Wells No Violations Compliance Action Follow-up -490635967: The well is still shut in. I called and left a message with Jim Hueghy of Killbuck Creek about well issues.
0480536963 2013-08-30 Administrative Inspection No Violations I spoke with Jim of Killbuck Creek and he stated he will get a motor on the pumpjack to see what it will do and if it does not perform to their standards then they will apply for a plug permit.
0490635967 2012-12-06 Production Wells Violations Noted Well is currently shut in and incapable of production. There is one pump jack with completely rusted rod. Wellhead is equipped with 4.5 and 8 casing and 2 tubing. Pumpjack has no motor. There was a slight odor of gas at wellhead. There is no ID at well or at tank battery. I called number listed for Killbuck Creek Oil Co and left a message explaining that the well needed to be produced or plugged and an ID posted. 03/01/2013: Talked with operator and he said they had 200 psi on the well and were able to get small amount of gas. They are planning on bringing a pumping unit out sometime in April when the weather is better and try to get well back into production.
0587402435 2015-10-14 Production Wells No Violations Today I called Killbucks main office and got in touch with a young lady at the desk. I informed her this well needed to be plugged or produced by the end of October or else legal action would be taken. She took down my number and the information about the well and said she would pass it on to Jim and have him get in touch with me tomorrow to discuss what action he would be taking.
0775026207 2018-08-22 Production Wells No Violations I returned to this well to do a follow-up on it for being idle and incapable of production. The well is still not capable of production at this time. The motor has not been put on the production unit yet and the production valves are closed at the wellhead. I tried to contact the company but the phone number that is in the RBDMS does not work. I will try to find a new number for them.
0779024439 2014-03-05 Production Wells No Violations Compliance Action Follow-up -490635967: There is a motor which is not hooked up to the pumpjack at well location. The bridle is also not hooked up to the rods. I talked to Jim Hughey and he stated that he will be out soon to try to get the well pumping again in the next few weeks. The tanks off of the road are Petroquests and they plan on removing them in the near future. This well runs back to the tanks along the ridge. He will call me once they get the well in production.
108713748 2015-6-29 0:00: PW No Violations 2.00
1289i28 2001-3-27 0:00: AD No Violations
1355175414 2012-12-10 Administrative Inspection No Violations I talked with Killbuck Creek today and owner said he got my message and will send someone out this week to determine if well is worth pumping. He will let me know in the next two weeks and if the well needs to be plugged he will file a permit to plug and abandon.
1367732294 2013-12-10 Administrative Inspection No Violations I talked with Jim Hughey and he stated he put a bridle and motor on the well but when he began pumping the bridle came off of the head. He needs to get someone back in there to raise the pumpjack. He also stated that the tank and dike at top of access road by their meter belongs to a plugged Chipco well. He will call when he takes care of this issue.
1377709924 2013-08-28 Production Wells No Violations Compliance Action Follow-up -490635967: There has been no resoltion to any of the issues.
1429018829 2015-04-14 Production Wells No Violations I was at this well to do a follow-up inspection on it. The pumping unit has been leveled out and has new boards under it. The well is still not capable of production at this time though because there is no motor on the well. I contacted Jim Huey to see when he plans on getting the motor on it. He said he would have it on in the next 2 weeks. He said the motor he had on it seized up so he has to do some work to it. I told him to contact me when he puts the motor on so I can come back to the well.
1658905917 2019-01-09 Production Wells No Violations I am back on location today to do a follow-up inspection on this well for getting the well in production. Jim Huey contacted me to let me know he put a new motor on the pumping unit and the well is back in production. During my inspection I found the well is capable of production with a new motor on the pumping unit and the production valves are open. The well is now in compliance.
1662673817 2015-03-24 Administrative Inspection No Violations Compliance Action Follow-up -490635967: Jim Heughey called and stated that this Saturday he is going to level the pumpjack and get the well in production.
1993510270 2018-10-26 Production Wells No Violations I returned to this well to do a follow-up on it for being idle and incapable of production. The well is still not capable of production at this time. The motor has not been put on the production unit yet and the production valves are closed at the wellhead. I tried to contact the company but the phone number that is in the RBDMS does not work. I will try to find a new number for them.
22531438 2015-10-2 0:00: PW No Violations 1.00
470593429 2015-3-19 0:00: PW No Violations 1.50
480536963 2013-8-30 0:00: AM No Violations
587402435 2015-10-14 0:00 PW No Violations 0.50

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
0490635967 US-OH-125373 2013-03-01 Forfeiture of bond
0490635967 US-OH-125374 2013-03-01 Failure to legibly identify well
0490635967 US-OH-125375 2013-03-01 Nonproduction; well shall be plugged or placed in temporary inactive status

For data sources see[9]

References