X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-151-25237

Well Details

Well ID: 34-151-25237
Loading map...
Country: United States
State: Ohio
County: Stark
Municipality: Lexington Township
Operator Name: ENERVEST OPERATING LLC
Well Pad ID:
Farm/Lease Name: GIBBS UNIT(SWIW #26)
License Status: Active Injection
License Date: 2008-12-30
Spud Date: 2009-01-22
Spud Drilling Contractor: UNION DRLG
Final Drill Date: 2009-02-12
Well Total Depth: 8620.00 ft
Configuration: Directional
Latitude: 40.950000
Longitude: -81.180000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2001-08-08 6674 GREAT LAKES ENERGY PTNSHP LLC Proposed Formation CLINTON/COPPER RIDGE Issued Date 8/8/01 Expired Date 8/8/02 6:00:00 AM
Original Spud 2001-08-17
Completed 2001-09-01
Plugged Back 2008-12-12
APP 2008-12-30 Proposed Formations:CONESAUGA, ROME, MT. SIMON, Issued Date:12/30/2008, Expired Date:12/30/2009 6:00:00 AM, Drilling unit acres:40, Proposed Well Type:SWD, Proposed Well Class:SWIW
Reached Total Depth 2009-02-12
Correction to Well 2009-04-17 CORRECTION TO TARGET INFORMATION: NEW FOOTAGE= 605'NL & 660'EL OF SEC. 13; NEW X= 2,362,365 AND NEW Y= 472, 320. (AS DRILLED SURVEY)
Annulus Pressure Monitoring Approved 2009-06-23
Last Compliance Report 2009-06-26
Completion Report Received 2009-07-06
Construction Permit Expires 2009-12-30
Change of Owner 2010-04-12 Operator changed from 6674, RANGE RESOURCES-APPALACHIA LLC to 7578, ENERVEST OPERATING LLC
Record Last Modified 2017-02-15

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2009-10-13 7462 7503 117
2009-10-13 8340 8570 200
8340 8570 200
7462 7503 117
7462 7503 117

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
H2O 15 8841 Bbl 0
H2O 0 68678 Gal 32800

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2001 RANGE RESOURCES-APPALACHIA LLC 634.00 0.00 30
2002 RANGE RESOURCES-APPALACHIA LLC 6420.00 0.00 365
2003 RANGE RESOURCES-APPALACHIA LLC 420.00 0.00 275
2010 ENERVEST OPERATING LLC 0.00 0.00 0
2011 ENERVEST OPERATING LLC 0.00 121.00 0
2016 ENERVEST OPERATING LLC 0.00 508.00 300

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2001 RANGE RESOURCES-APPALACHIA LLC Brine 2260 30
2002 RANGE RESOURCES-APPALACHIA LLC Brine 2260 365
2003 RANGE RESOURCES-APPALACHIA LLC Brine 1485 275
2010 ENERVEST OPERATING LLC Brine 0 0
2011 ENERVEST OPERATING LLC Brine 0
2016 ENERVEST OPERATING LLC Brine 0 300

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1023240207 2017-2-2 0:00:0 SW No Violations
-1122515213 2011-8-24 0:00: SW No Violations
-1146945263 2016-10-28 0:00 SW No Violations
-1196808896 2014-5-8 0:00:0 SW No Violations
-1280256073 2009-12-22 0:00 SW No Violations
-1285726543 2016-3-4 0:00:0 SW No Violations
-1314354844 2014-3-7 0:00:0 SW No Violations
-1334779613 2009-1-23 0:00: DD No Violations
-1398669137 2013-9-10 0:00: SW No Violations
-141137679 2014-6-20 0:00: SW No Violations
-142267639 2009-9-23 0:00: SW No Violations
-1499869642 2012-11-6 0:00: SW No Violations
-1595714597 2015-7-8 0:00:0 SW No Violations
-1597792503 2010-12-20 0:00 SW No Violations
-1672457300 2015-3-30 0:00: SW No Violations
-1717700086 2016-7-20 0:00: SW No Violations
-1719992386 2016-6-24 0:00: SW No Violations
-1720089574 2014-9-19 0:00: SW No Violations
-1806434120 2019-9-16 0:00: SW No Violations
-1813963172 2020-6-29 0:00: SW No Violations 1.00
-1840196143 2012-11-26 0:00 SW No Violations 1.00
-2021928722 2010-6-17 0:00: SW No Violations
-2031122393 2009-6-23 0:00: SW No Violations
-2118072665 2017-1-20 0:00: SW No Violations
-288591722 2009-9-30 0:00: SW No Violations
-488617008 2016-8-8 0:00:0 SW No Violations
-493145778 2009-11-6 0:00: SW No Violations
-511451886 2015-8-4 0:00:0 SW No Violations
-581241331 2009-9-2 0:00:0 SW No Violations
-653458537 2018-3-13 0:00: SW No Violations 1.00
-775465693 2017-5-4 0:00:0 SW No Violations
-78296193 2020-1-27 0:00: SW No Violations 2.40
-819611483 2017-1-24 0:00: SW No Violations
-849098116 2015-12-29 0:00 SW No Violations
0001288i89 2001-10-02 Preliminary Restoration No Violations On site to check the status of the drilling pits . Inspection revealed that the liners are intact and the fluid levels are acceptable .
0012386587 2017-03-21 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations at the time. Mike Burkhart was instructed to reduce the pressure on the tubing/casing annulus.
001288i104 2001-10-15 Preliminary Restoration No Violations Drilling pits closed , no violations at this time .
0132103045 2009-07-13 Salt Water Injection Well No Violations Range is doing an injection test with a portable injection pump.
0141137679 2014-06-20 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations.
0142267639 2009-09-23 Salt Water Injection Well No Violations There was no activity on the site today. Construction of the facility has not been started.
0183431710 2014-11-13 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0259150039 2017-03-24 Salt Water Injection Well No Violations A previous inspection found a pressure of 1770 pounds per square inch on the tubing/casing annulus. The well owners representative was instructed to lower the pressure on the annulus. All the pressure was released into a water truck.
0283755173 2008-12-15 Plug / Plug Back No Violations Ripped 4-1/2 dia casing at 6639. Halliburton pumped a 115 sack kick plug, set from 6559 up to 6159. The Whipstock service rig started pulling 4-1/2 dia casing.
0288591722 2009-09-30 Salt Water Injection Well No Violations The new access is being built .1 mi. east of Lair Rd. off of 619. The access apron off of 619 is finished.
0289694576 2016-11-29 Salt Water Injection Well No Violations An inspection of the injection well and surface facility found no violations.
0331118779 2009-08-07 Salt Water Injection Well No Violations The injection testing is still in progress. The current injection pressure is 1380 psi. The allowable injection pressure is 1920 psi. Fresh water (200 ppm) was flowing beside the access road toward the drainage ditch at Lair Rd. I called Nick Berelsman and discussed the site activity. Range is pumping 12 hours a day and is shutting down over night.
0400616775 2017-03-29 Salt Water Injection Well No Violations The purpose of this inspection was to ensure that the annular pressure was not building and the well had mechanical integrity. Pressure on the tubing/casing annulus was zero. There was no indication of a mechanical integrity failure.
0430518769 2016-08-29 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0488617008 2016-08-08 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0493145778 2009-11-06 Salt Water Injection Well No Violations The injection system is not in operation yet. There were no violations at the wellhead. The new access is being built .1 mi. east of Lair Rd. off of 619. The access apron off of 619 is finished.
0511451886 2015-08-04 Salt Water Injection Well No Violations The well and surface facility were inspected. There were no violations found at the time of inspection.
0581241331 2009-09-02 Salt Water Injection Well No Violations The portable injection pump and the two frac tanks are removed from the location. The entire location is rough graded. The wellhead assembly is intact. Injection pressure 200 psi, Annular pressure 220 psi.
0653458537 2018-03-13 Salt Water Injection Well No Violations I found no change from the previous inspection. The injection line is still disconnected from the wellhead. The fittings have been removed from the annulus. Follow-up inspections will continue.
0775386370 2008-12-16 Plug / Plug Back No Violations The Whipstock service rig continued pulling 4-1/2 dia casing.
0775465693 2017-05-04 Salt Water Injection Well Violations Noted An inspection of the injection well found a mechanical integrity failure. Mike Burkhart was instructed to immediately suspend injection operation. The well will need to pass a mechanical integrity test, before it will be allowed to operate.
0798254148 2017-12-14 Salt Water Injection Well No Violations I found the injection and facility in good repair on the day of my inspection. I observed no leaks or spills. An identification sign is posted at the facility and well. The facility is secure with a locked chain link fence. There are no violations at this time.
0819611483 2017-01-24 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations at the time.
0845597163 2017-01-17 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations at the time.
0849098116 2015-12-29 Salt Water Injection Well No Violations An inspection of the injection well and surface facility found no violations.
1023240207 2017-02-02 Salt Water Injection Well No Violations The injection well and surface facility were inspected. The pump was operating at the time. There were no violations found.
1095873481 2012-11-26 Salt Water Injection Well No Violations My inspection of the injection facility was accompanied by Ryan Channell. There were no violations found at the time of inspection.
1122515213 2011-08-24 Salt Water Injection Well No Violations The injection system was not running at time of inspection. There were no violations observed at the wellhead or at the brine tank battery.
1126243020 2012-07-18 Salt Water Injection Well No Violations My inspection of the well site and injection facility found no violations.
1146945263 2016-10-28 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations at the time.
1196808896 2014-05-08 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations.
1229101486 2008-12-12 Plug / Plug Back No Violations Halliburton pumped a 50 sack Rose Run plug (6780 - 7456) thru tubing.
1231443940 2009-01-08 Plug / Plug Back No Violations The plugging pit is closed.
1232468783 2009-01-20 Drill / Deepen / Reopen No Violations Whipstock is rigging up and digging pits this morning.
1232747205 2013-12-04 Salt Water Injection Well No Violations No violations were found at the time of inspection.
1233247748 2009-01-29 Drill / Deepen / Reopen No Violations Whipstock is tripping out of the hole at 5896. The rig has been stuck in the hole twice. They plan to set a 500 kick plug from 3977 - 4477; wait on cement 24 hrs; then continue drilling.
1233335265 2009-01-30 Drill / Deepen / Reopen No Violations Waiting on cement (W.O.C.). Halliburton set a kick plug from 3977- 4477 on 1-29-2009.
12386587 2017-3-21 0:00: SW No Violations
1261124444 2014-07-24 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations.
1262021043 2010-09-07 Salt Water Injection Well No Violations The injection system was running at the time of the inspection. There were no violations at the wellhead or at the brine tank battery.
1269953081 2010-03-29 Salt Water Injection Well No Violations This is a new facility. The injection system was not running at the time of the inspection. The injection pump was being tested today. There were no violations at the wellhead or at the brine tank battery.
1280256073 2009-12-22 Salt Water Injection Well No Violations Inspector Claus witnessed the injection line pressure test. The allowable injection pressure for this well is 1920 psi. 2000 psi was held on the injection line for 1 hour with no decline. The injection line pressure test PASSED. The test was performed and recorded on a chart recorder by the Bill Hawk Pipeline Co. Mark Moody and Nick Berelsman of Range Resources also witnessed the test.
1285726543 2016-03-04 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1288i104 2001-10-15 0:00 PL No Violations 0.50
1288i89 2001-10-2 0:00: PL No Violations 0.50
1314354844 2014-03-07 Salt Water Injection Well No Violations There were no violations found at the time of inspection.
132103045 2009-7-13 0:00: SW No Violations
1329021560 2019-5-9 0:00:0 SW No Violations 0.80
1334779613 2009-01-23 Drill / Deepen / Reopen No Violations Whipstock is fishing for the downhole motor with an overshot tool at the depth of 3891. I met with Bill Helmick (Whipstock) and Mark Moody (Range) at the location.
1361633622 2013-02-23 Salt Water Injection Well No Violations I was on site with Inspector Bob Roush. Injection was not taking place at the time of our inspection. Enervest was transporting water from this well to their flood field. One Enervest Truck was moving fluid this day. Truck plate number was PHE 7229. The truck was identified with UIC numbers, those numbers were UIC Brine # 25-386 which is the UIC number assigended to Enervest. The truck was identified as an Enervest truck. The company identification on the truck is black lettering; the truck is dark green in color. The UIC numbers are white and were legible.
1364220124 2016-08-09 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1398669137 2013-09-10 Salt Water Injection Well No Violations My inspection of the well and injection facility found no violations.
1475476401 2017-03-27 Salt Water Injection Well No Violations The purpose of this inspection was to ensure that the annular pressure was not building. On 3/24/17, the pressure on the annulus was blown down completely. Pressure on the tubing/casing annulus was zero. There was no indication of a mechanical integrity failure.
1497188278 2018-02-13 Salt Water Injection Well No Violations

-up inspections will continue.

1499869642 2012-11-06 Salt Water Injection Well No Violations My inspection of the injection facility and well found no violations.
1530193802 2018-06-28 Salt Water Injection Well No Violations I was on location for a MIT. I met with Mike Burkhart from Enervest. Pyramid Treating, Inc. was contracted to pressure up on the annulus.

9:00 am 2,000 psi 9:05 am 2,000 psi 9:15 am 2,000 psi

Afterwards, pressure on the annulus was dropped to 600 psi.

1532006589 2018-07-19 Salt Water Injection Well No Violations I found the injection well operating on the day of my inspection. Identification signs are posted. I observed no leaks or spills. There was a facility operator on location. The pump house is clean and in good working order.
1539628485 2018-10-15 0:00 SW No Violations 1.00
1539781577 2018-10-17 Salt Water Injection Well No Violations I was on location for a follow-up inspection to gauge the injection tubing and annulus pressures. I found the injection well not in operation on the day of my inspection. The injection tubing was on vacuum and there was 710 psi on the annulus. An identification sign is posted.
1542379858 2018-11-16 Salt Water Injection Well No Violations I found the injection well operating on the day of my inspection. There was no facility operator on location. The holes on the clean storage tank near the top have been repaired. Identification signs are posted. I observed no leaks or spills at the facility or injection well.
1551969981 2019-3-7 0:00:0 SW No Violations 1.70
1554472985 2019-4-5 0:00:0 SW No Violations 0.90
1563386506 2019-7-17 0:00: SW No Violations 1.00
1570709504 2019-10-9 0:00: SW No Violations 1.00
1571412231 2019-10-17 0:00 SW No Violations 1.50
1575401683 2019-12-3 0:00: SW No Violations 1.20
1578678087 2020-1-10 0:00: SW No Violations 1.50
1580301107 2020-1-29 0:00: SW No Violations
1582816066 2020-2-27 0:00: SW No Violations
1585751653 2020-4-1 0:00:0 SW No Violations 3.00
1595714597 2015-07-08 Salt Water Injection Well No Violations The well and surface facility were inspected. There were no violations found at the time of inspection.
1597792503 2010-12-20 Salt Water Injection Well No Violations The injection system was running at the time of the inspection. There were no violations at the wellhead or at the brine tank battery. The injection pressure at the wellhead was 1000 psi. The injection pressure at the injection pump was 1050 psi.
1614259038 2013-08-21 Salt Water Injection Well No Violations No violations were found at the time of my inspection.
1619544487 2013-06-28 Salt Water Injection Well No Violations There were no violations found at the time of inspection. Pressures were gauged with pump operating.
1650284449 2015-06-09 Salt Water Injection Well No Violations The well and surface facility were inspected. There were no violations found at the time of inspection.
1672457300 2015-03-30 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1681073316 2012-03-13 Salt Water Injection Well No Violations No violatons were found at the time of my inspection of this well site.
1709226665 2009-02-19 Drill / Deepen / Reopen No Violations 4-1/2 dia casing and a formation packer were cemented on 2-15-2009. Whipstock is drilling on the formation packer.
1717700086 2016-07-20 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1719992386 2016-06-24 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1720089574 2014-09-19 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations.
1752778824 2018-08-14 Salt Water Injection Well No Violations

-up inspections will be conducted.

183431710 2014-11-13 0:00 SW No Violations
1840196143 2012-11-26 Salt Water Injection Well No Violations I inspected the Gibbs Unit {SWIW#26} No. 1K (34151252370000) injection well on November 26, 2012; I was accompanied by Steve Ochs. There were no violations at the wellhead or at the brine tanks.
1850509857 2017-05-25 Salt Water Injection Well No Violations The injection operation was shut down at the time. The gate was closed and locked. There were no additional violations found.
1914771276 2011-05-10 Salt Water Injection Well No Violations The injection system was running at the time of the inspection. There were no violations at the wellhead or at the brine tank battery. The injection pressure at the wellhead was 1000 psi. The injection pressure at the injection pump was 1050 psi.
1970394093 2020-8-11 0:00: SW No Violations 1.00
1986611743 2017-10-31 Salt Water Injection Well No Violations
2002460973 2018-06-08 Salt Water Injection Well No Violations I found the injection line is still disconnected from the wellhead. The fittings have been removed from the annulus. The fencing around the facility is locked. The access road gate is closed and locked. Identification signs are posted. Enervest is waiting to a rig to become available to make repairs on the packer.
2021928722 2010-06-17 Salt Water Injection Well No Violations The injection system was running at the time of the inspection. There were no violations at the wellhead or at the brine tank battery.
2031122393 2009-06-23 Salt Water Injection Well No Violations Whipstocks service rig ran a new Baker 41-B Lockset Retrievable packer on new J-55, 2-3/8 dia teflon lined tubing. The packer was set in compression (10,000-12,000 lbs) at a depth of 7657. Harvey Ball was the onsite tool man for Baker Tool. Halliburton Services mixed, pumped, and displaced annular inhibitor. The injection well contains 200 perforations located from 8340 - 8570. I calculated the maximum allowable injection pressure at 1920 PSI. A 15 minute mechanical integrity test (MIT) was conducted on the annulus. 2010 PSI was placed on the annulus. The MIT PASSED. *Note; The reason the tubing packer is located 683 above the top perforation is because the formation packer is located at 7710. Range Resources wanted the tubing packer located above the formation packer. Range Resources will conduct injection tests on the well before they commit to constructing a permanent injection facility.
2042989094 2014-10-16 Salt Water Injection Well No Violations The injection well and surface facility were inspected. The 1/4 inch valve on the casing will need to be replaced. There were no violations found at the time.
2077389429 2019-6-20 0:00: SW No Violations
21037467 2019-1-17 0:00: SW No Violations 0.60
2118072665 2017-01-20 Salt Water Injection Well No Violations An inspection of the injection well and surface facility found no violations.
259150039 2017-3-24 0:00: SW No Violations
283755173 2008-12-15 0:00 PB No Violations
289694576 2016-11-29 0:00 SW No Violations
331118779 2009-8-7 0:00:0 SW No Violations
400616775 2017-3-29 0:00: SW No Violations
430518769 2016-8-29 0:00: SW No Violations
775386370 2008-12-16 0:00 PB No Violations
798254148 2017-12-14 0:00 SW No Violations 0.70
845597163 2017-1-17 0:00: SW No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
0775465693 US-OH-128812 2018-01-13 9-3-07(H) Mechanical failure/contamination

For data sources see[9]

References