X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-155-23894

Well Details

Well ID: 34-155-23894
Loading map...
Country: United States
State: Ohio
County: Trumbull
Municipality: Hubbard Township
Operator Name: PAC DRILLING LLC
Well Pad ID:
Farm/Lease Name: CATONE
License Status: Producing
License Date: 2008-01-08
Spud Date: 2008-01-16
Spud Drilling Contractor: KILBARGER DRLG
Final Drill Date: 2008-01-21
Well Total Depth: 5351.00 ft
Configuration: Vertical
Latitude: 41.160000
Longitude: -80.600000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2008-01-08 Proposed Formations:CLINTON, Issued Date:1/8/2008, Expired Date:1/7/2009 6:00:00 AM, Drilling unit acres:40, Proposed Well Type:OG, Proposed Well Class:POOL
Reached Total Depth 2008-01-21
Completion Report Received 2008-03-04
Construction Permit Expires 2009-01-07
Record Last Modified 2017-02-15

For data sources see[2]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
H2O 0 0 50000 CALLED OPERATOR ON 7/1/08 REQUESTING PERF LOG…

NO FRAC WATER VOLUME REPORTED… GM

For data sources see[3]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2008 PAC DRILLING LLC 22770.00 701.00 301
2009 PAC DRILLING LLC 23861.00 468.00 348
2010 PAC DRILLING LLC 18099.00 361.00 341
2011 PAC DRILLING LLC 10646.00 215.00 339
2012 PAC DRILLING LLC 6588.00 182.00 390
2013 PAC DRILLING LLC 5295.00 166.00 360
2014 PAC DRILLING LLC 6172.00 117.00 360
2015 PAC DRILLING LLC 4458.00 89.00 363
2016 PAC DRILLING LLC 4068.00 87.00 357
2017 PAC DRILLING LLC 3120.00 76.00 357
2018 PAC DRILLING LLC 3047.00 105.00 357

For data sources see[4] [5]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2008 PAC DRILLING LLC Brine 0 301
2009 PAC DRILLING LLC Brine 0 348
2010 PAC DRILLING LLC Brine 0 341
2011 PAC DRILLING LLC Brine 0 339
2012 PAC DRILLING LLC Brine 63 390
2013 PAC DRILLING LLC Brine 21 360
2014 PAC DRILLING LLC Brine 31 360
2015 PAC DRILLING LLC Brine 36 363
2016 PAC DRILLING LLC Brine 0 357
2017 PAC DRILLING LLC Brine 17 357
2018 PAC DRILLING LLC Brine 0 357

For data sources see[6] [7]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1542263585 2019-2-4 0:00:0 UP No Violations 0.50
-1841463264 2012-9-5 0:00:0 UP No Violations 0.50
-1909799072 2017-3-17 0:00: UP No Violations 0.80
0471627425 2016-11-07 UrbanProduction Wells No Violations


PAC Drilling will: Install the required safety equipment


-pressure relief valve


The equipment on the site consists of the following:



On 12/13/2016, Northeast Regional Supervisor Tom Hill and I met with Justin Caldwell, co-owner of PAC Drilling, and Rusty Hornhill, well tender for PAC Drilling concerning the missing required urban safety equipment on 31 PAC Drilling wells in Hubbard and Liberty Townships. Mr. Caldwell has been given a document listing the wells with the missing the urban safety equipment. PAC Drilling is to submit a schedule for equipment installation for review and approval by the Division of Oil & Gas.

1003043058 2019-7-2 0:00:0 UP No Violations
1542263585 2019-02-04 UrbanProduction Wells No Violations I conducted a compliance notice follow-up for compliance notice 2052828854, regarding multiple compliance notices related to urban rule requirements. At the time of this inspection, the production tank was still missing the required urban safety equipment, i.e spark arrestor and pressure relief valve, and needs installed as required by 1501:9-9-05E(4)(b-e). A charcoal filter has been installed on the 210 BBL production tank. There was a locked chain link fence surrounding the tank battery; however, the fencing was 6 feet in height and needs to be 8 foot minimum. The top of the production tanks extend more than 3 foot above the fence and needs modified as required by 1501:9-9-05E(4)(f). The identification sign was missing the required information per 1501:9-9-05E(1)(a-e). No landscaping has been installed around the tank battery and was not waived during the pre-site inspection. The required access gate was not installed and was not waived during the pre-site inspection. Install the required gate with a lock at the access entrance per 1501:9-9-05E(2), and post the proper identification sign on the access gate per 1501:9-9-05E(1)(f).

PAC needs to: 1) Correct the identification sign to be in compliance with 1501:9-9-05(E)(1)(a-e) at the tank battery with: Well owners address and phone number Property street address or nearest address to the access road entrance. 2) Raise the fencing around the tank battery or use low profile tanks to be in compliance with 1501:9-9-05(E)(4)(f). 3) Install the required gate with a lock at the access road entrance per 1501:9-9-05(E)(2)(c). 4) Post the proper identification sign on the access road gate per 1501:9-9-05(E)(1)(f). 5) Complete the required landscaping at the tank battery per 1501:9-9-05(E)(6)(a-c). 6) Install the required urban safety equipment on the production tank per 1501:9-9-05E(4)(b-e). Low-pressure relief valve and spark arrestor.

1548472876 2019-11-18 0:00 UP No Violations
1841463264 2012-09-05 UrbanProduction Wells No Violations I completed an urban production well inspection. My inspection found the well was equipped with a plunger lift unit (rabbit) that was in good condition. The tank battery was surrounded by a chain link fence and contained one 210 barrel oil barrel storage tank, one 50 barrel brine storage tank, a separator, and the proper identification. I noticed no visible spills or leaks. The lease road was in good condition. There are no violations at this time.
1904548518 2020-4-15 0:00: UP No Violations
1909799072 2017-03-17 UrbanProduction Wells No Violations

-up lines have plugs, but are missing locks. The 210 bbl. storage tank is missing the required urban safety equipment. There is an identification sign posted at the tank battery. The identification sign is missing the required information per 1501:9-9-05(E)(1)(a--site inspection.

The equipment on the pad consists of the following:



1962288638 2011-09-16 Preliminary Restoration No Violations Preliminary Restoration was completed.
2052828854 2018-05-14 UrbanProduction Wells Violations Noted At the time of this inspection, the well was equipped with a plunger lift assembly. The annulus and flow line valves were open. There was an identification posted at the well, and was surrounded by a locked fence. The diked tank battery has two storage tanks and a separator. The pick-up lines are secure with the valve handles removed and plugs. The production tank was missing the required urban safety equipment, and needs installed as required by 1501:9-9--e). There was a locked chain link fence surrounding the tank battery; however, the fencing was 6 feet in height and needs to be 8 foot minimum. The top of the production tanks extend more than 3 foot above the fence and needs modified as required by 1501:9-9--9--e). No landscaping was installed around the tank battery, however the tank battery was located in a wooded area. The access was stable. The required access gate was not installed and was not waived during the pre-site inspection. Install the required gate with a lock at the access road entrance per 1501:9-9--9-
471627425 2016-11-7 0:00: UP No Violations 0.50

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
2052828854 US-OH-120908 2018-06-05 9-05E1 ID (a-i)
2052828854 US-OH-120909 2018-06-05 9-05E2 FENCING (a-d)
2052828854 US-OH-120910 2018-06-05 9-05E4 TANKS (a-i)

For data sources see[8]

References