X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-155-23950

Well Details

Well ID: 34-155-23950
Loading map...
Country: United States
State: Ohio
County: Trumbull
Municipality: Hubbard Township
Operator Name: PAC DRILLING LLC
Well Pad ID:
Farm/Lease Name: HUDACK
License Status: Producing
License Date: 2008-07-29
Spud Date: 2008-09-18
Spud Drilling Contractor: CAPSTAR DRILLING
Final Drill Date: 2008-10-02
Well Total Depth: 5282.00 ft
Configuration: Vertical
Latitude: 41.180000
Longitude: -80.580000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2008-07-29 Proposed Formations:CLINTON, Issued Date:7/29/2008, Expired Date:7/29/2009 6:00:00 AM, Drilling unit acres:236.73, Proposed Well Type:OG, Proposed Well Class:POOL
Reached Total Depth 2008-10-02
Completion Report Received 2009-03-06
Construction Permit Expires 2009-07-29
Record Last Modified 2017-02-15

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2009-06-04 4988 5096 35
4988 5096 35
4988 5096 35

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
H2O 20 0 70000

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2009 PAC DRILLING LLC 21491.00 367.00 305
2010 PAC DRILLING LLC 22299.00 299.00 355
2011 PAC DRILLING LLC 11511.00 271.00 345
2012 PAC DRILLING LLC 7599.00 98.00 359
2013 PAC DRILLING LLC 7030.00 173.00 363
2014 PAC DRILLING LLC 6854.00 68.00 353
2015 PAC DRILLING LLC 5409.00 58.00 360
2016 PAC DRILLING LLC 4169.00 115.00 357
2017 PAC DRILLING LLC 3530.00 49.00 357
2018 PAC DRILLING LLC 3491.00 0.00 358

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2009 PAC DRILLING LLC Brine 0 305
2010 PAC DRILLING LLC Brine 0 355
2011 PAC DRILLING LLC Brine 61 345
2012 PAC DRILLING LLC Brine 48 359
2013 PAC DRILLING LLC Brine 63 363
2014 PAC DRILLING LLC Brine 63 353
2015 PAC DRILLING LLC Brine 67 360
2016 PAC DRILLING LLC Brine 0 357
2017 PAC DRILLING LLC Brine 0 357
2018 PAC DRILLING LLC Brine 0 358

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1040388004 2018-5-17 0:00: UP No Violations
-60517917 2019-2-28 0:00: UP No Violations
0060517917 2019-02-28 UrbanProduction Wells No Violations I conducted a compliance notice follow-up inspection for compliance notice 1486266844, regarding multiple compliance issues related to urban rule requirements. At the time of this inspection, the fencing around the well has not been installed, and it was not waived during the pre-site inspection. The pick-up lines have plugs, and the handles have been removed. The 210 BBL storage tank was missing the required urban safety equipment, except for a charcoal filter. It was observed that small holes had started to form near the top of the 210 BBL tank and some staining could be seen down the side of the tank. No active leak was observed from the 210 BBL tank, at the time of this inspection. There was an identification sign posted at the tank battery, that still needed the required information per 1501:9-9-05(E)(1)(a-e). There was a wooden fence around the tank battery but the door was missing from the fence, and multiple boards have fallen, leaving large areas of the tank battery unsecure. The 210 BBL storage tank extends more than 3 foot above the wooden fencing. Landscaping has not been implemented at the well or tank battery.

PAC needs to: 1) Correct the identification sign to be in compliance with 1501:9-9-05(E)(1)(a-e) at the tank battery with: Well owners address and phone number Property street address or nearest address to the access road entrance. 2) Install urban safety equipment on the production tank as required by 1501:9-9-05(E)(4)(b-e): Functioning low-pressure relief valve. Tank hatch lids shall have a functioning seal and the hatch shall be secured at all times. Functioning lightning arrestor. 3) Replace the 210 BBL tank with holes at the top. 4) Repair the existing fence around the tank battery and reinstall the man door with a lock. 5) Install fencing around the well.

1040388004 2018-05-17 UrbanProduction Wells No Violations I conducted a compliance notice follow-up inspection for compliance notice 1486266844. The well was equipped with a plunger lift assembly. The annulus and flow line valves were open. There was an identification posted at the well. There was no fencing around the well and it was not waived during the pre-site inspection. The well is located approximately 97 feet west of a railroad track. The tank battery has two storage tanks and a separator. The pick-up lines have plugs, but are missing locks. The 210 BBL storage tank was missing the required urban safety equipment. It was observed that small holes had started to form near the top of the 210 BBL tank and some staining could be seen down the side of the tank. There was an identification sign posted at the tank battery, but was missing the required information per 1501:9-9-05(E)(1)(a-e). There was a wooden fence around the tank battery but the door was missing from the fence. The 210 BBL storage tank extends more than 3 foot above the wooden fencing. There was no landscaping around the well and tank battery; however, they are located in an isolated area and not visible from private residences and Wick Campbell Road or Drummond Avenue. The access road was stable. The access road gate was waived during the pre-

PAC needs to: 1) Correct the identification sign to be in compliance with 1501:9-9-05(E)(1)(a-e) at the tank battery with: Well owners address and phone number Property street address or nearest address to the access road entrance. 2) Install urban safety equipment on the production tank as required by 1501:9-9-05(E)(4)(b-e): Activated charcoal filters. Functioning low-pressure relief valve. Tank hatch lids shall have a functioning seal and the hatch shall be secured at all times. Functioning lightning arrestor. 3) Replace the 210 BBL tank with holes at the top.

1486266844 2016-07-20 UrbanProduction Wells Violations Noted


PAC Drilling has 45 days to: Install the proper urban safety equipment.


-pressure relief valve

Install a lock on the valve for the load line.

The equipment on the site consists of the following:



1490276099 2017-03-09 UrbanProduction Wells No Violations

--up lines have plugs, but are missing locks. The 210 bbl. storage tank is missing the required urban safety equipment. There is an identification sign posted at the tank battery. The identification sign is missing the required information per 1501:9-9-05(E)(1)(a--

PAC needs to: 1) Correct the identification sign to be in compliance with 1501:9-9-05(E)(1)(a-e) at the tank battery with: Well owners address and phone number Property street address or nearest address to the access road entrance. 2) Install urban safety equipment on the production tank as required by 1501:9-9-05(E)(4)(b-e): Activated charcoal filters. Functioning low-pressure relief valve. Tank hatch lids shall have a functioning seal and the hatch shall be secured at all times. Functioning lightning arrestor.

The equipment on the pad consists of the following:


1573434051 2008-09-22 Drill / Deepen / Reopen No Violations Capstar drilling at 4645 .
2071080072 2020-4-24 0:00: UP No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
1486266844 US-OH-113814 2016-08-04 LOCKS
1486266844 US-OH-113815 2016-08-04 TANKS (a-i)

For data sources see[9]

References