X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-155-24085

Well Details

Well ID: 34-155-24085
Loading map...
Country: United States
State: Ohio
County: Trumbull
Municipality: Hubbard Township
Operator Name: PAC DRILLING LLC
Well Pad ID:
Farm/Lease Name: PATTERSON
License Status: Producing
License Date: 2013-11-21
Spud Date: 2014-01-03
Spud Drilling Contractor: POULSON DRILLING
Final Drill Date: 2014-01-12
Well Total Depth: 5154.00 ft
Configuration: Vertical
Latitude: 41.170000
Longitude: -80.610000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2013-11-13 Proposed Formations:CLINTON THRU MEDINA, Issued Date:11/13/2013, Expired Date:11/13/2015 12:00:00 PM, Drilling unit acres:41.884, Proposed Well Type:OG, Proposed Well Class:POOL
APP 2013-11-21 Proposed Formations:CLINTON THRU MEDINA, Issued Date:11/21/2013, Expired Date:11/21/2015 12:00:00 PM, Drilling unit acres:41.884, Proposed Well Type:OG, Proposed Well Class:POOL
Reached Total Depth 2014-01-12
Completion Report Received 2014-04-16
Construction Permit Expires 2014-11-21
Record Last Modified 2017-02-15

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2014-04-21 5128 5190 85
5128 5190 85
5128 5190 85

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
2014-01-23 H2O 20 3260 Bbl 50000 Universal Well Services Inc.
2014-01-23 ACID 0 500 Gal 50000 Universal Well Services Inc. On 1/23/2014, I witnessed Universal Well Service stimulate the Clinton Sandstone formation for PAC Drilling. The backside annulus was completely open during the stimulation operations with no failures. There were no casing failures. All of the stimulation equipment operated smoothly for Universal Well Service.

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2014 PAC DRILLING LLC 13652.00 712.00 360
2015 PAC DRILLING LLC 11561.00 546.00 360
2016 PAC DRILLING LLC 7505.00 336.00 360
2017 PAC DRILLING LLC 6350.00 291.00 360
2018 PAC DRILLING LLC 5978.00 194.00 360

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2014 PAC DRILLING LLC Brine 116 360
2015 PAC DRILLING LLC Brine 56 360
2016 PAC DRILLING LLC Brine 24 360
2017 PAC DRILLING LLC Brine 0 360
2018 PAC DRILLING LLC Brine 0 360

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-79522791 2018-5-15 0:00: UP No Violations
-817809950 2017-10-11 0:00 UP No Violations 0.40
-877708453 2014-8-4 0:00:0 UL No Violations 0.50
0079522791 2018-05-15 UrbanProduction Wells No Violations I conducted an compliance notice follow-up inspection for compliance notice 817809950. The well was equipped with a plunger lift assembly and the annulus and flow line valves were open. There was still no identification posted at the well. No fencing surrounded the well; however, the fencing was waived during the pre-site inspection. The diked tank battery has three storage tanks and a separator. The pick-up lines are secure with handles removed from the valves and plugs. The 210 BBL storage tanks have the required urban safety equipment. There was an identification sign posted at the tank battery, but was missing the required information per 1501:9-9--e). The fencing around the tank battery was waived during the pre-site inspection. The access road was stable with two locked gates at the entrance and shared with permit #2-4084. Identification was needed on the gate.

PAC needs to: 1) Post an identification sign to be in compliance with 1501:9-9--e) at the tank battery with: Well owners address and phone number Property street address or nearest address to the access road entrance. 4) Post the proper identification sign on the access road gate per 1501:9-9- 3) Post an identification sign at the well per 1501:9-9-

0817809950 2017-10-11 UrbanProduction Wells Violations Noted

--up lines are secure with plugs and the handles have been removed from the valves. The 210 bbl. storage tanks have the required urban safety equipment. There is an identification sign posted at the tank battery. The identification sign is missing the required information per 1501:9-9-05(E)(1)(a-e). There is no danger, keep out and no smoking sign(s) posted. The fencing around the tank battery was waived during the pre--4084. There is no identification sign on the gate.

PAC needs to: 1) Post an identification sign to be in compliance with 1501:9-9-05(E)(1)(a-e) at the tank battery with: Well owners address and phone number Property street address or nearest address to the access road entrance. 4) Post the proper identification sign on the access road gate per 1501:9-9-05(E)(1)(f). 3) Post an identification sign at the well per 1501:9-9-05(E)(2).

0877708453 2014-08-04 UrbanPreliminary Restoration No Violations I was on location for an urban preliminary restoration. I found during my inspection the well site graded. The site was well vegetated. The pits were filled and closed. All debris was removed. Erosion and drainage controls are in place. The well was in production with a plunger lift unit. The tank battery consisted of two, 210 barrel production tanks, a 50 barrel brine tank and a separator. A dike surrounded the production equipment. The production equipment had the correct spacing. The proper identification was posted. The proper urban safety equipment was installed on both production tanks. Plugs were installed on the load lines. The lease road was in good condition. The tank battery was located in an isolated and wooded area; fencing was waived on the pre-site inspection. Urban preliminary restoration passed.
0914753905 2014-01-06 Drill / Deepen / Reopen No Violations I witnessed Universal Well Service cement the surface casing for PAC Drilling. Poulson Drilling drilled a 11 Hole #2 to 750 GL (ground level) and set 8.625 casing to 718 GL with two centralizers. The casing was 23 lbs. The bottom of the Berea Sandstone was logged at 612. Universal established circulation with 12 bbls of fresh water followed by 500 gallons of Uniflush. Next, the operator pumped 150 sacks of Unifill Lite as the lead cement followed by 125 sacks of Type 1 as the tail cement. The cement was displaced to 703 GL with 45 bbls of fresh waster. I witnessed 23 bbls of good cement returned to surface. Cement was static at surface within the casing annulus after 20 minutes.
1387222099 2013-12-16 Drill / Deepen / Reopen No Violations My inspection found Kleese Development building the well site and lease road. Drainage and erosion controls were being installed. No violations at this time.
1389102384 2014-01-04 Drill / Deepen / Reopen No Violations I witnessed Universal Well Service cement the conductor for PAC Drilling. Poulson Drilling drilled a 14.75 Hole #1 to 70 GL (ground level) and set 11.75 casing to 60 GL. The casing was 23 lb. Universal established circulation and pumped 20 bbls of gel. Next, Universal pumped 100 sacks of Type 1 cement. The cement was displaced to 40 with 6 bbls of fresh water. I witnessed 7 bbls of good cement returned to surface. After 20 minutes, the cement was static at surface.
1395532767 2019-03-01 UrbanProduction Wells No Violations I conducted an compliance notice follow-up inspection for compliance notice 817809950, regarding multiple compliance issues related to urban rule requirements. At the time of this inspection, identification still needed to be posted at the well. There was an identification sign posted at the tank battery, but was still missing the required information per 1501:9-9-05E(1)(a-e). The lease road gates were not locked, at the time of this inspection and the identification still has not been installed on the gate.

PAC needs to: 1) Post an identification sign to be in compliance with 1501:9-9-05E(1)(a-e) at the tank battery with: Well owners address and phone number Property street address or nearest address to the access road entrance. 2) Post the proper identification sign on the access road gate per 1501:9-9-05E(1)(f). 3) Post an identification sign at the well per 1501:9-9-05E(2). 4) Install the locks on both access gates.

1490789442 2017-03-21 UrbanProduction Wells No Violations

--up lines have plugs, but no locks. The 210 bbl. storage tanks have the required urban safety equipment. A deduct meter and 31 day chart dated 1 March 2017 is installed at the separator. There is an identification sign posted at the tank battery. The identification sign is missing the required information per 1501:9-9-05(E)(1)(a-e). There is no danger, keep out and no smoking sign(s) posted. The fencing around the tank battery was waived during the pre--4084. There is no lock or identification sign on the gate.

The equipment on the pad consists of the following:



1965824593 2020-4-15 0:00: UP No Violations
914753905 2014-1-6 0:00:0 DD No Violations 4.50

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
0817809950 US-OH-129312 2017-12-26 ID (a-i)

For data sources see[9]

References