X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

37-005-00914

Well Details

Well ID: 37-005-00914
Loading map...
Country: United States
State: Pennsylvania
County: Armstrong
Municipality: Washington Township
Operator Name: KRIEBEL WELLS DISSOLUTION CO LLC
Well Pad ID:
Farm/Lease Name: C C HELM 50A 1
License Status: ACTIVE
Spud Date:
Permit Date:
Well Type: GAS
Unconventional Well: N
Configuration: Vertical Well
Conservation: No
Latitude: 40.906798
Longitude: -79.563483

For data sources see[1][2][3]

Well History

Date Event
1940-01-18 Drilling Completion
1961-01-01 Drilling Completion
1986-04-21 CONVERTED TO STORAGE (GAS)
1986-04-21 OLD WELL

For data sources see[4]


Production Data

Period Operator Name Gas Quantity (mcf) Gas Production Days Oil Quantity (bbl) Oil Production Days Water Quantity (bbl) Water Production Days
1992 PEOPLES TWP LLC 0.00 0 0.00 0 0.00 0
1993 PEOPLES TWP LLC 0.00 0 0.00 0 0.00 0
2002 KRIEBEL MINERALS INC 4590 365 0.00 0 0.00 0
2003 KRIEBEL MINERALS INC 6119 336 0.00 0 0.00 0
2004 6284 355 0.00 0 0.00 0
2005 KRIEBEL MINERALS INC 5687 328 0.00 0 0.00 0
2006 KRIEBEL MINERALS INC 5680.00 355 0.00 0 0.00 0
2007 KRIEBEL MINERALS INC 4402.00 365 0.00 0 0.00 0
2008 KRIEBEL MINERALS INC 5211.00 365 0.00 0 0.00 0
2009 KRIEBEL MINERALS INC 3880.00 323 0.00 0 0.00 0
2010 KRIEBEL MINERALS INC 4,219.00 354 0.00 0 0.00 0
2011 KRIEBEL MINERALS INC 2,909.00 323 0.00 0 0.00 0
2012 KRIEBEL MINERALS INC 1,707.00 294 0.00 0 0.00 0
2013 KRIEBEL MINERALS INC 1,989.00 324 0.00 0 0.00 0
2014 KRIEBEL MINERALS INC 1,655.00 294 0.00 0 0.00 0
2015 KRIEBEL MINERALS INC 728.00 293 0.00 0 0.00 0
2016 KRIEBEL MINERALS INC 115.00 237 0.00 0 0.00 0
2017 KRIEBEL WELLS DISSOLUTION CO LLC 372.00 323 0.00 0 0.00 0
2018 KRIEBEL WELLS DISSOLUTION CO LLC 879.00 264 0.00 0 0.00 0

For data sources see[5]

Inspection Data

Inspections Performed

Inspection ID Inspection Category Inspection Date Inspection Type Inspection Result Inspection Comments
213648 Primary Facility 1991-06-06 Routine/Complete Inspection No Violations Noted E&S OK
216431 Primary Facility 1994-11-17 Routine/Complete Inspection No Violations Noted STRG-13; 100'; SPEC, ETC
217611 Primary Facility 1995-11-07 Routine/Complete Inspection No Violations Noted 410 PSI/ANN SHUT-IN
218950 Primary Facility 1996-10-23 Routine/Complete Inspection No Violations Noted 380 PSI/ANN/0 PSI
219264 Primary Facility 1993-09-28 Routine/Complete Inspection No Violations Noted FAIR & HELM STORAGE
219596 Primary Facility 1997-10-28 Routine/Complete Inspection No Violations Noted 380 PSI/ANN FILLED
2685980 Primary Facility 2018-01-24 Routine/Complete Inspection Pending This well is tagged and in production. The well head casing is corroded and is leaking gas and the mechanical integrity of the well has been compromised. The operator will need to repair the well head casing in order to restore the mechanical integrity of this well. I will be placing a call to the operator to discuss this well. The rest of the piping and the meter run look ok.
2687673 Primary Facility 2018-01-29 Routine/Complete Inspection Pending This is a follow up inspection on this well. I met with three of the operators field personnel and witnessed them shut the venting annulus between the 6" and the 3" production tubing and install an ounce gauge to monitor the pressure build up in the 6" annulus space. The 6" only pressured up to 3 ounces before the well began venting the gas out between the 6" and the 8" casings. This indicated that it is not possible to plumb the venting 6" annulus gas in to the sales line to sell it as present line pressure is 28 psi and the 6" annulus will only build to 3 ounces before leaking out between the 6" and the 8" casings. Although the operator installed a vent pipe up into the atmosphere approximately 9' high to disperse the venting gas from the annulus higher up, it is the finding of the Department that this is only a temporary measure until the operator either establishes and implements a plan to repair the casing in this well or plugs the well.
2790202 Primary Facility 2018-10-17 Plugging(Includes Plugged/Mined Through) No Violations Noted The plugging rig had wireline shooting three shot perforations in the 3" pipe every hundred feet from 1300' to 800' at the time of this inspection. The bond log showed the 3" to be free up at 800' so the forward plan is to shoot the 3" off at that point and pull it. We will discuss plugging the upper portion of the well when they have arrived at this point. I had the opportunity to meet with Dave Oaks, Associate Professor Andres Clarens of The University of Virginia and two of his colleagues to discuss some new proposals for plugging wells more efficiently going forward. All equipment on site looked ok.
910044 Primary Facility 2000-01-06 Routine/Complete Inspection No Violations Noted 64 PSI; ANN; 0 PSI

For data sources see[6]

References

  1. ↑ "Permits Issued Detail Report". Pennsylvania Department of Environmental Protection. 2019-05-20. Retrieved 2019-05-21. 
  2. ↑ "Spud Data Report". Pennsylvania Department of Environmental Protection. 2019-04-30. Retrieved 2019-05-16. 
  3. ↑ "Oil and Gas Well Pad Report". Pennsylvania Department of Environmental Protection. 2019-05-20. Retrieved 2019-05-21. 
  4. ↑ "Compiled from multiple data sources - see Pennsylvania Oil and Gas Data Sources". 2020-02-27. Retrieved 2020-02-27. 
  5. ↑ "Oil and Gas Production Reports". Pennsylvania Department of Environmental Protection. 2019-03-31. Retrieved 2019-05-21. 
  6. ↑ "Oil and Gas Compliance Report". Pennsylvania Department of Environmental Protection. 2019-05-20. Retrieved 2019-05-21. 
Retrieved from "https://wellwiki-prod.cloud.arc.gwu.edu/index.php?title=37-005-00914&oldid=9138515"