X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

37-115-22009

Well Details

Well ID: 37-115-22009
Loading map...
Country: United States
State: Pennsylvania
County: Susquehanna
Municipality: Oakland Township
Operator Name: SWN PROD CO LLC
Well Pad ID: 151947
Farm/Lease Name: WALKER DIEHL SOUTH 5H
License Status:
Spud Date:
Permit Date: 2015-06-17
Well Type: GAS
Unconventional Well: Y
Configuration: Horizontal Well
Conservation: No
Latitude: 41.969289
Longitude: -75.622283

For data sources see[1][2][3]

Well History

Date Event
2015-06-17 New Permit Application
2015-08-15 Performed Spud Operation
2015-08-19 New Permit Application
2015-09-28 Drilling Completion
2015-11-02 Perforation
2015-11-02 Performed Stimulation
2016-01-20 DEVIATED

For data sources see[4]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 2015-11-02 2015-11-08 6,122 8,740,410 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 Water Operator Carrier Water 7732-18-5 100 80.6982 72,875,800.0
MaxPerm-20A, 265 gallon tote Baker Hughes Friction Reducer MSDS and Non-MSDS Ingredients Listed Below N/A 0 0.0310955 28067
Sand, White, 30/50 Baker Hughes Proppant MSDS and Non-MSDS Ingredients Listed Below N/A 0 9.19903 8,303,100.0
CI-39 Baker Hughes Corrosion Inhibitor MSDS and Non-MSDS Ingredients Listed Below N/A 0 0.0014779 1334
Ferrotrol 300L Baker Hughes Iron Control MSDS and Non-MSDS Ingredients Listed Below N/A 0 0.004935 4454.39
HCl, 10.1 - 15% Baker Hughes Acidizing MSDS and Non-MSDS Ingredients Listed Below N/A 0 0.713195 643734
MaxPerm 30 Baker Hughes Friction Reducer MSDS and Non-MSDS Ingredients Listed Below N/A 0 0.0332442 30006.4
Ingredients in Additive(s) (MSDS and non-MSDS) Baker Hughes See Trade Name(s) List Acetic Acid 64-19-7 0.1 0.00003320 30.0064
Calcium Chloride 10043-52-4 5 0.0006944 627.069
Tar Bases, Quinoline Derivs., Benzyl Chloride-Quaternized 72480-70-7 30 0.0004432 400.2
Tetrasodium EDTA 64-02-8 0.1 0.00003320 30.0064
Acetic Acid, Potassium Salt 127-08-2 1 0.0003323 300.064
Formic Acid 64-18-6 30 0.0004432 400.2
Sorbitan, mono-(9Z)-9octadecenoate 1338-43-8 5 0.0016614 1500.32
Water 7732-18-5 85 0.661449 597332
Hydrochloric Acid 7647-01-0 15 0.106925 96560.1
Potassium Chloride 7447-40-7 1 0.0001389 125.414
Sorbitan monooleate ethoxylate 9005-65-5 5 0.0016614 1500.32
Citric Acid 77-92-9 60 0.0029595 2672.63
Oxyalkylated alcohol 78330-21-9 5 0.0032153 2903.67
Sodium Chloride 7647-14-5 5 0.0033542 3029.08
Acrylamide Modified Polymer 38193-60-1 60 0.0199364 18003.9
Potassium Iodide 7681-11-0 2 0.00002950 26.68
Sulfurized polyolefin 68037-13-8 5 0.00007390 66.7
Oxyalkylated Fatty Acid 61791-002 40 0.0005909 533.6
Sorbitan, mono-(9Z)-9-octadecenoate 1338-43-8 5 0.001554 1403.35
Isopropanol 67-63-0 5 0.00007390 66.7
Ethylene Glycol 107-21-1 45 0.0062494 5643.62
Hydrotreated Light Distillate 64742-47-8 30 0.0093239 8420.1
Glutaraldehyde 111-30-8 30 0.0037148 3354.75
Aldehyde 104-55-2 30 0.0004432 400.2
2-Propenoic, Polymer with Sodium Phosphinate, Sodium Salt 71050-62-9 20 0.0027775 2508.28
Didecyl Dimethyl Ammonium Chloride 7173-51-5 10 0.0012383 1118.25
Polyaklylene 7756-94-7 1 0.00001480 13.34
Petroleum Distillates 64742-47-8 30 0.0099682 9001.93
Quaternary Ammonium Compound 68424-85-1 5 0.000693 625.825
Polyoxyethylene sorbitan monooleate 9005-65-6 5 0.001554 1403.35
Crystalline Silica (Quartz) 14808-60-7 100 18.441 16,653,400.0
Potassium Acetate 127-08-2 0.5 0.00000740 6.67
1-Propanesulfonic acid, 2-methyl-2-[(1-oxo-2-propen-1-yl)amino]-,
polymer with 2-propenamide, sodium salt
83446-68-8 60 0.0186478 16840.2
Ethanol 64-17-5 5 0.0006191 559.125
Scaletrol 720 Baker Hughes Scale Inhibitor MSDS and Non-MSDS Ingredients Listed Below N/A 0 0.0138946 12541.4
Alpha 1427 Baker Hughes Biocide MSDS and Non-MSDS Ingredients Listed Below N/A 0 0.0123891 11182.5
Sand, White, 100 mesh Baker Hughes Proppant MSDS and Non-MSDS Ingredients Listed Below N/A 0 9.25135 8,350,320.0

For data sources see[5]

Stimulation Data

Stimulation Date Phase Number Chemical Agent Volume (gal) Treating Pressure (psi) Breakdown Pressure (psi)
2015-11-02 0 0 0

For data sources see[6]

Production Data

Period Operator Name Gas Quantity (mcf) Gas Production Days Oil Quantity (bbl) Oil Production Days Water Quantity (bbl) Water Production Days
2015 SWN PROD CO LLC 299,218.00 38 0.00 0 0.00 0
2016 SWN PROD CO LLC 1,999,744.00 364 0.00 0 0.00 0
2017 SWN PROD CO LLC 1,467,100.00 362 0.00 0 0.00 0
2018 SWN PROD CO LLC 1,121,301.00 363 0.00 0 0.00 0
2019 SWN PROD CO LLC 896,855.00 365 0.00 0 0.00 0

For data sources see[7]

Waste Data

Period Operator Waste Type Quantity Disposal Method Waste Facility ID
2015 SWN PROD CO LLC Servicing Fluid 341.00 Bbl REUSE OTHER THAN ROAD SPREADING
2015 SWN PROD CO LLC Fracing Fluid Waste 102.50 Bbl LANDFILL THR029
2015 SWN PROD CO LLC Drill Cuttings 1,195.00 Tons LANDFILL 101247
2015 SWN PROD CO LLC Produced Fluid 18,275.00 Bbl REUSE OTHER THAN ROAD SPREADING
2016 SWN PROD CO LLC Other Oil & Gas Wastes 60.50 Bbl REUSE OTHER THAN ROAD SPREADING
2016 SWN PROD CO LLC Produced Fluid 2,831.50 Bbl REUSE OTHER THAN ROAD SPREADING
2017 SWN PROD CO LLC Produced Fluid 1,351.50 Bbl SURFACE IMPOUNDMENT 95-16-65420-013
2017 SWN PROD CO LLC Other Oil & Gas Wastes 74.00 Bbl SURFACE IMPOUNDMENT 95-16-65420-013
2018 SWN PROD CO LLC Produced Fluid 1,551.50 Bbl SURFACE IMPOUNDMENT 95-16-65420-013
2018 SWN PROD CO LLC Produced Fluid 330.00 Bbl REUSE (AT WELL PAD)
2018 SWN PROD CO LLC Other Oil & Gas Wastes 165.00 Bbl SURFACE IMPOUNDMENT 95-16-65420-013
2018 SWN PROD CO LLC Produced Fluid 445.50 Bbl SURFACE IMPOUNDMENT 826342
2019 SWN PROD CO LLC Produced Fluid 232.00 Bbl SURFACE IMPOUNDMENT 826342
2019 SWN PROD CO LLC Other Oil & Gas Wastes 14.25 Bbl SURFACE IMPOUNDMENT 95-16-65420-013
2019 SWN PROD CO LLC Produced Fluid 1,018.00 Bbl SURFACE IMPOUNDMENT 95-16-65420-013

For data sources see[8]

Inspection Data

Inspections Performed

Inspection ID Inspection Category Inspection Date Inspection Type Inspection Result Inspection Comments
2397651 Primary Facility 2015-08-11 Preoperation Inspection No Violations Noted On 8/11/15, the Department was on site at the SWN NR 19 Walker Diehl Well Pad to conduct a Preoperational Inspection. Inspection conducted with Rich Gulyas, SWN Construction Foreman, Andy Breese, SWN Construction Foreman, and Ryan Klemish, Regulatory Analyst. The well permits that have been issued for this pad are the Walker Diehl N 1H (115-22008), the N 4H (115-21882), and the S 5H (115-22009). All perimeter BMP’s in place to include red lined additions. Pad is 100% complete. No violations noted.
2400978 Primary Facility 2015-08-21 Drilling/Alteration No Violations Noted
2401616 Primary Facility 2015-08-25 Routine/Complete Inspection No Violations Noted
2409341 Primary Facility 2015-09-22 Drilling/Alteration No Violations Noted
2412665 Primary Facility 2015-09-14 Routine/Complete Inspection No Violations Noted Heavy equipment on location mobilizing rig. SDC 44 to resume drilling on the Walker Diehl North 1H at approx 2000 hours on 9/15
2446901 Primary Facility 2016-02-03 Routine/Complete Inspection No Violations Noted
2470050 Primary Facility 2016-03-31 Routine/Complete Inspection No Violations Noted
2474827 Primary Facility 2016-04-14 Routine/Complete Inspection No Violations Noted
2479229 Primary Facility 2016-04-19 Routine/Complete Inspection No Violations Noted Department representatives Frank Hoehle, WQS and Andrea Mullen, LPG were on site on 4/19/2016 to conduct a routine complete inspection of the Walker Diehl Well Pad (ESX29-115-14-0067). The site was last inspected by the company on 4/18/2016.

The wells associated with this site are as follows: 115-22008 115-21882 115-21888 115-22009

The site had some slippage along the access road leading in near the following GPS coordinate: 41deg. 58' 15" 75deg 37' 23". (Photos 1 and 2)

The site also had poor vegetative growth in the vicinity of coordinates: 41deg. 58' 13.8" 75deg. 37' 20.1". The poor vegetative growth could possibly be due to too much organic matter being incorporated into the soil from tree clearing operations, resulting in a tie up of the nitrogen necessary for proper germination. (Photos 3 and 4)

The sediment trap near coordinates 41deg. 58' 12.9" 75deg. 37' 21.8" is laden with sediment, most likely due to the poor vegetative growth directly uphill from the trap. (Photo 5)

If

2484781 Primary Facility 2016-05-17 Routine/Complete Inspection No Violations Noted
2491697 Primary Facility 2016-06-06 Routine/Partial Inspection No Violations Noted The Department was on site at the Walker Diehl Well Site to conduct a Routine Partial Inspection. At the time of the inspection, the Department noted that the E&S Plan was on site and the E&S Inspection Log indicated that SRT conducted their most recent inspection on 6/6/16. The Department walked the site to verify if the recent efforts to bring the site back into compliance have worked. The Department noted a large mulch pile on the well site. Also, the site does not meet temporary stabilization requirements. During the Department’s inspection, there were large areas that had very little to no vegetation at all. The Department requests that the operator survey these areas and deploy a method of temporary stabilization consistent with your E&S Plan within 3 business days of receipt.
2495478 Primary Facility 2016-06-23 Routine/Complete Inspection No Violations Noted
2505975 Primary Facility 2016-07-26 Routine/Complete Inspection No Violations Noted
2526630 Primary Facility 2016-09-26 Follow-up Inspection No Violations Noted

The Department was on site to conduct a Follow-Up Inspection of the Walker Diehl Well Site. On 6/21/16 the Department received an email from Afton Sterling (Regulatory Supervisor-SWN) concerning stabilization efforts at the NR 19- Walker Diehl Well Site. The email explained that they worked on the site that day seeding, fertilizing, and applying hay/mulch and that they will be bringing an additional 10 bales of hay and two bags of fertilizer for application the following day.

During this Follow-Up Inspection, it was noted that the well site appeared to meet temporary stabilization requirements. Areas that did not have vegetative growth consisted of mainly rock. There was a small area on the cut slope adjacent to the rock filter that could use some additional measures to acquire stabilization. There is still a large mulch pile on site. Lastly, the catch basin at the cross culvert outlet was full of water that was clear (not sediment laden as it was during the previous inspection).

2564082 Primary Facility 2017-02-23 Routine/Complete Inspection No Violations Noted Site mostly snow covered. The repairs cited in a previous inspection had been addressed and is holding up well, with visible vegetation through snow cover. The cut slope of the well pad has areas of low vegetation however this seems to be due to a local lack of good topsoil and rocky conditions. The access road is well graded and had no erosion or washouts along its length. There are no apparent erosional issues currently.

There are no violations

If there are any issues feel free to contact me at 570 346-5539

2570662 Primary Facility 2017-03-09 Routine/Complete Inspection No Violations Noted At time of inspection, arrived on site at 12:35p.m.

The cellar was set up with a plastic corrugated pipe around the well for inspection access; there was water above the surface casing with no bubbling noticed. The (9x5) annulus vent pipe was open and set up with a Taylor plug to check for pressure with a Crystal pressure gauge and a Schneider digital pressure gauge with 752psi on it, the valve going to the production tank was closed. There was 774psi on the production casing and 322psi on the production line. I took a walk around the location and there were no obvious concerns noticed. I left the site at 12:50p.m.

2665885 Primary Facility 2017-11-30 Routine/Complete Inspection No Violations Noted At time of inspection.

The well was in production. The cellar was set up with a corrugated pipe around the well for inspection access. The (20x13) and (13x9) annuli were below the water level and there was no bubbling noticed. I took a walk around the location and there were no obvious concerns noticed. There were no violations noted.

2765663 Primary Facility 2018-08-21 Routine/Complete Inspection No Violations Noted At time of inspection.

The well was in production. The cellar was set up with a plastic corrugated pipe around the well for inspection access. There was water .5' below grade in the cellar and there was no bubbling noticed. I took a walk around the location and there were no obvious concerns noticed. There were no violations noted.

2828194 Primary Facility 2019-01-14 Routine/Complete Inspection No Violations Noted Today's inspection was conducted as a routine inspection. Overall the site has good stabilization. No E&S issues identified. No violations noted.

For data sources see[9]

References